Behringer X32 User Output Routing
Vložit
- čas přidán 12. 07. 2024
- Want to record your stream on the X-USB, X-Live, or OBS? User Output Routing is where you can do this! User Routing on the firmware version 4 and newer allows for 1 to 1 patching on the Behringer X32 and Midas M32. In this video I talk about how to use User Routing on the output side as well as a few examples that I see all of the time out in venues and churches.
Become a member and help support me and my channel: / drewbrashler
Chapters:
00:00 Intro
00:50 Practical Use of User Output Routing
01:23 30 Channels + 2 Outputs for Stream
07:00 What can you select with User Output Routing?
07:27 Conclusion
Find more articles and information at www.drewbrashler.com
Great info as always! I find a great lesson for these is connecting 2 consoles and setting up user routing to send all the outputs through a stage box or local outputs (IE, setting outputs 13-16 to take Fill, Sub, and Main LR from the FOH console and the other outputs fed from the monitor console)
I need guidance on how to do output to the different stage boxes not to a stream. For example, we want our mains going out of the main consul, we want our in ears going out of a stage box. I thought this worked like user input routing, but it doesn’t appear to. I was hoping you could simply send output one to XLR one for example, on the console and output two to AES 50 output one.
I need the same. @drewbrashler. Can you do video on this please
@DrewBrashler This would be helpful for me as well!
Brilliant explanation of the the Aux out
Lovely information. Cheers!
Thank you so much for this video, Drew! You saved me!
I was initially confused about how the User Input 8-channel blocks could feed the X-Dante card as outputs. I then really got confused when I discovered that User Output 8-channel blocks could contain both Inputs and Outputs, both of which functioned as outputs when used with the X-Dante card. Thanks to Drew's videos, I think I now understand. For input sources, the User Input 8-channel blocks can be used for both X32 Inputs and X-Dante card inputs whereas User Output 8-channel blocks can only be used to configure the input to the expansion card, in my case, the X-Dante card and can contain both Inputs and Outputs of all types.
Video Suggestion: Waves Supperrack with X32. Also Virtual Soundcheck with Waves SuperRack on the same computer. The routing can be complex. There’s not a lot of youtube content on this.
That’s where my thoughts went too!
Hey Drew, great explanation of the X32 features. Some real gems you’ve shared, thank you! One question I do have is how can a person make use of all 48 user outs, given the USB card only caters for 32 outputs?
Hello
I also make tutorials in French, and I just wanted to congratulate you for the quality and precision of your tutorials, it's really great.
Thanks
Best regards
Patrick
Hello Drew, great info in this video. My scenario is: I have an X32 compact at foh and a DL32 on stage. Is have all the mix busses sent 1 to 12 to the DL32, but some times I need to sent a signal to a delay speaker right next to the foh. Is it possible to use any local XLR output with a different signal that those sent to the DL32?
Thank you very much!
Hi Drew, Thank you for this vid. I like the idea of using card out 31 and 32. However, if I am not mistaken, OBS only sees output 1 and 2. How can I configure OBS to use 31 and 32 for my livestream? Thx
Yes Drew, this user is right. You dropped the ball on the output to OBS in Windows. That output to OBS is determined by the ASIO driver which can only output 1 and 2 to Windows for use in OBS etc. You can record your stream on 31 and 32 but OBS will never see it unless you extrude on 1 and 2.
Thanks for your videos Drew. Great help. I am trying to figure out one thing, not sure it's possible. I have 4 stereo mix busses for the band's IEMs. They use the phone app to mix their own IEM sends on those 4 stereo mix buss pairs. They would like to have another stereo mix of the drum kit they can easily adjust in their IEM without having to mix all the individual drum inputs. Yeah, I know, the best way is teach them to use the MCAs in the app and group the drums into one but thought I'd try this. Can't figure out a way to do this internally without physically looping the drum mix out and back in to one of the channels tying up a physical output & input in the process. I'm on a X32 Rack so plenty of channels and busses but a little limited on physical inputs/outputs. Am I missing something basic or is this just not possible in routing? Again thanks!
I’m using the usb for live streaming directly to my computer using OBS and I also want to record on the SD card at the same time . When I use the routing that you showed on the video I don’t get my local in 1 and aes50 2 to play back on the faders that They are assigned to. It should show up on the output I assigned it to right?
Hello Drew . Thanks for the video . Couple days ago my crew and I was wonder about interesting routing . We have M32 at FOH and one MON Engeneer with in-ear monitor. Ones he hit the Solo knob he should hear band in-ear mixes and correct them . At the same time we wanted to have ability to talk 2 mics to his in-ears . One mic is from FOH position and second mic is on opposite stage left/right to hi. It would be better also to have ability to have 3rd mic for intercom with FOH . So main question is it possible to send SOLO BUS to Mon engeneer together with FOH and Stage mics . I suppose we have this opportunity but I wanted to use minimum channels /bus/matrix for this purpose. I think many of your viewers could have the needs of intercom solutions.
Hi i do enjoy your video on the x32
I have a question about PC version for the x32 you was showing us how to do users routing coming from the console.... But my question is how do I get my x32 edit program to do users routing in single block of 1?
Like for example i have a stage box on stage and the x32 front of house and i would like to route the live streaming audio coming from the back of the x32.
cause i would it set up coming through the User output?
How do i do that on my x32 edit program?
I’m currently setting up an S32 stage box and x32 compact.
The stage box will have 18 radio mics going in and I planned to have my two mains come out of it and also set up two stage monitors as well.
This is for a musical theatre show in two weeks.
Please could you advise best way of setting up all the routing?
Drew, love your channel. Here is an idea for a video. Many of us use the X32 system and hate it when we play somewhere that has an analog FOH, but we want to use our P16's etc. A splitter rig can get quite expensive, but I think our system could do the same thing. If I used my stage boxes (Sd16 and an SD8)to my X32, then with an extra S32 I have, could I set the 16 outs on the S32 to Direct outs of the channels we are using with the tap being set to in/lc? So I would have the band using P16's just like we always do and the FOH would get a raw, untouched signal from each instrument from my S32. If this would work, it would make a great video. So many people want to use their X32 system but don't want to spend a fortune on more equipment like splitters, etc.
Hey drew I need help with the flex assigning on the p16.
You said you would do a tutorial in another video but I can’t find it?
How might I best get in contact with you to discuss this further?
So I have been following your tutorials and recently started doing multi track recording but when I went to listen to my church Livestream I couldn't hear any of the instruments and none of the vocal effects on my lead singer and pastor mic any idea why?? I stream through obs and used tracks live for multi track recording
Drew, thanks for how to setup for x-LIVE recording. I setup my x32 for matrix 1 for PA top L, matrix 2 for PA top R, and Matrix 3 for subs as mono. In this routing video I think I need to have an output 30 for the sub matrix, correct? Not just 31 and 32 for mains? I like being able to control the sub volume separate from the tops but we just bought EV tops that match our EV subs. Should I change the use of matrices to use the X32 default Main LR bus and the MC bus now that the powered EV enclosures can handle the crossover main to subs? Thank you.
Can this routine work for camera guy that come to venue with zoom recorder that has XLR in how can someone get signal out of input 31 and 32
Hello. Great channel! One question. I am using the X32 in a studio. Have its 32 XLR inputs all full. No AUX used. I am recording via USB into a DAW. I would like to route the CARD from the DAW to the AUX so I can use the AUX faders on the X32 to mix. Someone told me it is possible. I can't figure out how to do it. Can you help?
Hi, I like to know once I have create a Matrix, but then decided I don't need it anymore. How do I remove that Matrix from the mix?
So do the AES50 outputs mirror the local outputs on the back of the consolo
Hey Drew, my band plays to multitracks. I recently started sending those multitracks to separate channels on my mixer - electric guitars are going to channel 1, synths are going to channel 2, etc. I have my multitracks going to 7 channels.
I also multitrack record everything session so we can later post it.
I am looking for a way to send the aforementioned 7 channels to my multitrack recording (maybe through a stereo bus), but I wanted those tracks to arrive automated into my recording.
However, I DON’T want my EQ moves to go into my recording. I only want my fader moves to go into my daw.
What you think?
Hi, thanks for the tutorial, may I ask ? NOW, our church has 8pieces of P16 connected to MIDAS M32 ,We want to purchase a set of IEM system which is 4 channels Transmitter so that our 4 vocalists can monitor their own sound separately, however, IF we connect the IEM system to MIDAS M32 , we can not connect to P16 but we want to use the functions of P16 would you please help us how to do this.
Do you know what the tap point is? Meaning, if you assign IN 1 to one of the user outputs, is that at the head amp level? I'm guessing there's no way to get it to include the processing (comp, eq). Thinking through a way to get away from P16's. May switch to Klang, but sending unprocessed audio to a monitoring solution isn't very appealing.
How about routing the outputs to an AES50 out, like a sd16? I can not for the life of me figure out how to specify the outputs on them. I have a mixbus that I want to send to an output thats on my sd16, but its not as clear as assigning an input thats coming from it.
sir How to Use channal Input Delay
Hi, How do i get my local Input at FOH (with all the recieved inputs from AES50-A Inputs , Rack 32) to get out again to AES50-A?
Hey drew.
I am trying to use vmix to send an audio output back into the x32 on a channel.
Can you help with that?
I am using the xlive card, I have signal going from the card/x32 to vmix no problem, but I can’t seem to get a send back into the desk. Thanks in advance!
I have a board that was in place from a previous owner at a theater and the have it so mix bus 1-12 are different speakers but also the master is controlling different speakers. My client who owns the board wants the LR main to be a master volume. How can I change this to be this way.
Hey Drew, could you help with how to route s32 16 returns for iem
Hallo Drew, ik have an X32 + SD8-SD16-SD8 in cacade, giving me 32 inputs and 24 outputs. How kan i use outputs 17-24 ?
salut Drew,
j'utilise le x32 pour les retours in ear, et je souhaite configurer tout les 16 mixbus physique.
Comment enlever les effets du mixbus 13 à 16, et utilisé tout les 16 sorties mixbus.
Hello, video suggestion: Routing a stereo bus (local in 9 / 10) to local xlr (9 / 10) output with a precision limiter please.
Hy, can you make video on how to use Berhinger 32 Rack whit the micro Behringer ECM8000 ? For setting up the microphones.
Yes you can!
@@DrewBrashler thank you. I will wait your video !
I just got a new Behringer x32 compact. From the start when I turned it on everything is clipped. Nothing plugged in. I can’t get anywhere with it. It’s brand new. Is there a way to fix it?
How would I route MixBus 1 [the drummer's IEM Mix] to exit through the TRS Aux-out 1&2 please?
I got the same question...
Different spot. Go to the Aux page and set Aux 1 to Matrix 1 and Aux 2 to Matrix 2. (I’m sure you’ve figure it out by now) cheers
Hello my name is Luigi I bought x32 producer Bheringer , but I have difficulty with the setteggi of the mixer IN / OUT, I use Studio one and I can not set the software , I would like to manage the bank 1/8 9/16 to record separate tracks for example 1track kick 2T snare 3T HH 4T tom ... Etc... Etc... but I can not set me can you help? congratulations for the video
Bonjour voilà mon problème j'ai fait ce que Musictribe ma donner M32 FOH AES50 A > DL32 AES50 A (une petite précision c'est une table Behringer )
DL32 AES50 B > M32C AES50 A
Sur le la table façade Foh Allez dans Setup > Global et réglez votre taux d'échantillonnage et réglez la synchronisation sur interne.
Sur le M32C (à l'aide de l'application M32-Edit) allez dans Setup > Mixer et réglez le taux d'échantillonnage pour qu'il corresponde à la console FOH, puis Synchronization to AES50 A.
Le système devrait maintenant se synchroniser, indiqué par les cases vertes dans le coin supérieur droit de l'écran sur le M32 FOH et sur le côté droit de M32-Edit pour le M32C.
Ensuite, sur votre M32C, allez dans le menu Routage > Entrées et réglez la Source sur les options AES50-A (voir capture d'écran suivante). Le M32C tirera alors les entrées du DL32.
le souci c'est que tout fonctionne depuis la table FOH façade et retours pas souci ,
mais depuis ma tablette connecté et mon pc avec Edit m32 et sur mon routeur et MDL32 et M32C
les volumes de fonctionne pas pas possible de les bouger comment faire le bon routing svp merci beaucoup
I’m using the usb for live streaming directly to my computer using OBS and I also want to record on the SD card at the same time . When I use the routing that you showed on the video I don’t get my local in 1 and aes50 2 to play back on the faders that They are assigned to. It should show up on the output I assigned it to right?