ASG HPA scorpion evo 3 A1 HOW TO
Vložit
- čas přidán 21. 07. 2024
- ASG HPA scorpion evo 3 A1 HOW TO ...
I know, it’s a long overdue promise, but I finally made an instruction video on it.
I explain how to get the gun apart and back together. How the hpa engine works. And how a correct dwell is set.
• 1: Desassembly 01:40
• 2: Adjust the engine 07:34
◦ 2.1: dwell 08:28
◦ 2.2: burst 11:26
◦ 2.3: full auto 13:09
◦ 2.4: single shot only 14:53
• 3: Assembling 16:27
• 4: set dwell correctly 20:37
• Big thanks to my sponsor bbshop!
Make sure to check him out for good quality bb’s @ www.bb-shop.be
5% discount code: krikke
• Krikke airsoft Facebook: / krikke-airsoft-1582405...
• Krikke airsoft Instagram: krikke_airs... - Sport
Hey! Loved the vid but i have a question what model of hi-capa slide from airsoft masterpiece do you have?
Thanks, great video and everything you need to know about the Evo HPA. But now that I've seen the barrel with the Hop Up Unit, I want to know what you've built there ^^.
That's a maple leaf crazy yet with hybride 70° bucking.
Hello, I know this is an older video so idk if this comment will get seen but what IGL do you use? I tried the premium amped line and it was way too large to not kink in the grip or get around where the selector switch rod goes through the gearbox.
Blijft heerlijke gun in die setup
Hopelijk schiet ie even heerlijk. Maar dat weten we morgen
Hey ,what bbs you are using for this testing .25s or .3s
Hey! Great video! Do you happen to know if the HPA version is compatible witht he maxx hopup unit with the stock nozzle?
it is, just done it
I don’t know why my brand new asg scorpion evo isn’t working . Bought it brand new hooked up everything and it doesn’t shoot . Need help with mine
Thank you so much for this tutorial. now i am going to buy the gun HAHA. btw this is the wolverine inferno gen 2 right?
Yea it's the gen 2.
@@krikkeairsoft3399 thank u for replying!!! And as always, i appreciate the vids
Hey,
Ik heb zelf ook een Scorpion BET die ik wil inbouwen naar HPA. dit word wel mijn eerste keer dat ik iets ga ombouwen. wat heb ik nodig? kun je me daar missichien mee helpen?
Groetjes Mike
Lang gedacht om deze te kopen. Heb uiteindelijk toch gekozen voor een ICS cxp MARS S3 carbine.... geen spijt ervan
Is there a risk of lipo 11.1 breakage for original Scorpion evo ?
If you have the 1.1joule version, no.
That one is 11.1v out of factory.
How do you take it out of single fire only?
yeah how? You can Help me ?
just bought my evo second hand and was getting my fps up and now its leaking air out of the nozzle when i plug the tank in. the gun still clicks with just the battery plugged in. but now air just leaks out the nozzle and it doesnt cycle.
Nozzle is stuck in a wrong position, probably.
Check if it sits all way back when air plugged in.
@@krikkeairsoft3399 had a bb jammed in the HopUp so the nozzle was stuck in a bad position
Can you explain dwell in more depth??
Dwell is how long the solenoid stays open to release air after a triggerpull. Lenght and diameter of barrel in combination with the bb weight have an effect on this.
That's why you need to adjust it.
To short airrelease makes the bb "fall" out of barrel, cause the airpower will already be gone before bb is out of the barrel.
To long airrelease is just waist of air and can influence the bb flightpad negative.
Hallo.. Ik kocht pas een 2ehands scorpion.. Maar nu ik hem wil testen merk ik dat al de settings op de fire selector semi auto zijn en dus geen burst noch full... Als ik de batterij koppel terwijl ik de trekker onder hou met fire select op semi kom ik idd in program mode en klikt hij telkens 12x en bij de 13e dubbel. Maar dat doet hij ook als ik hetzelfde doe met fire selector op burst of full... Enig idee hoe ik terug burst en auto zou kunnen instellen?
De keuze voor burst en single fire wordt in de full auto modus geregeld.
In semi regel je je dwell, dat zijn dus die 12 verschillende stappen. Elke stap geeft een lager luchtvolume.
In full auto regel je rof. Hier regel je je Schietsnelheid. Waarbij de traagste 1 schot is. Wat de hele gun in single fire zet.
Vanaf dat je deze aanpast naar een hogere rof (1stap hogerr is al genoeg) gaat je burst terug activeren.
Burstmodus is altijd een triple shot, dat kan niet aangepast worden.
Ik realiseer me net dat ik je fout heb geïnformeerd. 🤦🏻♂️
Vandaag zelf aan men scorp aan het sleutelen geweest. En heb single terug afgeschakeld. Dit heb ik gedaan door in burstmodus de batterij aan te koppelen met ingehouden trigger. En niet in full auto.
What parts do i have to get to get mine looking like yours
Dear god man all that just to change a bucking lol. Ive gotten spoiled with my m4 platform .
Yeah, M4 is faster. 😅
I'm e a r l y, possibly first
First to the comments atleast 😏
I can't find anything for this gun and I have it