Unboxing ASG scorpion EVO 3A1 HPA & first test (part1)

Sdílet
Vložit
  • čas přidán 5. 09. 2024
  • Unboxing my new airsoftgun, ASG scorpion EVO 3A1. Had some troubles with the first test, that shows how important the dwell seems to be.
    I will keep you guys up to date on further development.
    Store I bought it from: www.airsofteire.com

Komentáře • 23

  • @lainchanb___k1244
    @lainchanb___k1244 Před 7 lety +1

    Hi, nice video!
    One question tho, how did you change the dwell?
    Is the board that holds those changes located in the triggerbox, because i took mine apart and that was the only place that held any electronics ...

    • @krikkeairsoft3399
      @krikkeairsoft3399  Před 7 lety

      Lainchan B___k Thx. Update on this video in a few hours 😉.
      It's a wolverine inferno spartan edition. If you look that up on wolverine channel you will find how to change it. 👍

    • @lainchanb___k1244
      @lainchanb___k1244 Před 7 lety

      Thank you. I check it up!

  • @felipecastano4483
    @felipecastano4483 Před 7 lety

    The hpa version requires a minimum of .28 gramms bb

    • @krikkeairsoft3399
      @krikkeairsoft3399  Před 7 lety +1

      felipe castano It even didn't work with 0.30gr. I sended it back, and the replaced my hop up unit. Now it works as it should with 0.25gr.
      Check out my last video, that's the first gameplay with it.

  • @mr.fishnugget5600
    @mr.fishnugget5600 Před 6 lety +1

    Would you recommend the hpa version or the aeg version?

    • @krikkeairsoft3399
      @krikkeairsoft3399  Před 6 lety

      Mr. Fishnugget, both are extremely good. So it's up to you if you want to go hpa with botle and tube or not.
      I know people who had troubles with aeg and with hpa. If so, always contact asg or asg retailer first. They have a good warranty service

    • @mr.fishnugget5600
      @mr.fishnugget5600 Před 6 lety

      how much do you think everythning in total will cost for hpa i am just starting out to get into polarstars

    • @krikkeairsoft3399
      @krikkeairsoft3399  Před 6 lety

      No idea what the prices are where you live, so hard to say.

    • @mr.fishnugget5600
      @mr.fishnugget5600 Před 6 lety

      alright thanks!

    • @mr.fishnugget5600
      @mr.fishnugget5600 Před 6 lety +1

      do you think you can recommend me what I would need to buy to get the scorpion evo hpa with eveyrthing:?

  • @felipecastano4483
    @felipecastano4483 Před 7 lety

    You use .28gram bb minimum ?

  • @zif0404
    @zif0404 Před 5 lety

    Hey krikke do you have ideas how to get a tracer on a evo scorpion carbine ???

    • @krikkeairsoft3399
      @krikkeairsoft3399  Před 5 lety

      On a carbine it is hard. You could try to treath the front hole of the silencer to put tracer in there.
      Installing uv leds into youre hop up is also a possibility, but that aint easy cause theire aint much room.
      Also check out asg scorpion evo owners page on FB. Lot of info to find there with all evo owners.

    • @zif0404
      @zif0404 Před 5 lety

      Okay thx I will see what I can find. I got the small tracer xcortech xt301 compact so bin thinking about getting a longer silencer and then put into it

  • @falc_4260
    @falc_4260 Před 6 lety

    geen problemen gehad met verzending ?

    • @krikkeairsoft3399
      @krikkeairsoft3399  Před 6 lety

      Falc _ neen. Airsofteire is topwinkel. En nog binnen EU, dus niks douanekosten

  • @gjed3913
    @gjed3913 Před 2 lety

    what battery you using?

  • @ayrtonrice4965
    @ayrtonrice4965 Před 4 lety

    Any one k ow how to reduce the fps