Ok,,, that’s a good overview. Appreciate you sharing this, so I know what to talk to my transmission shop about. Had more than a few gmc trucks, so yeh, transmissions.
Glad to see you back. Glad to see someone doing these videos a fella over there at precision transmission has obviously stopped doing videos for a moment
@@MHolt3573 If you’re referring to precision transmission I know exactly what happened and I knew I just knew eventually it would. trying to operate a business as a family is so complicated at times been there done that.
@@MHolt3573 No Trent and his dad wasn’t seeing eye to eye or getting along as well as mom and daughter in law. Trent’s wife. It is just a big family squabble it’s sad to see this happened but it does. Trent probably feels he doesn’t get the recognition respect and even pay that he feels he deserves he’s a smart young man he owns the channel dad was just the star of the shows. it is now called something else. It is still there but Trent is no longer with precision he has took off on his own he plans to start back up with his own business doing the videos again someday. but everything was put on hold even the fan page on Facebook has been archived so it’s in active. basically it’s still there it’s just not active no one can comment you can still go back and watch all of Richards videos on CZcams they’re still there.
@@MHolt3573 So I just went and checked and it looks like precision now has their channel back Trent however has branched out on his own and Made has a new channel so there will be two channels in the future we may see some videos again from both of them
@@expressautotransmissiondav4207I have a question. On the prv in the pump inner spring suppose to be loose an bound after you put the boost valve an sleeve in ??
Hi there I have a 2002 suburban with a 4l60e what is the right oe pump kit number 24219542 or 24219541 it appears both to be for my unit by the way love your videos on 4l60e related
Rebuild a 4l60e and weeks later i have a third slip for a bit ,it down shift from third to second no problem then it shifts from third to fourth no problem,any suggestion I'll preciate for your help thanks..
September 19th I took one apart today 2002 at my Indianapolis Salvage near the Indy 500.. wreaked too.. suburban 2002 The....C CLIP BROKE IN HALF...only unit I can surpass is the pump Would of been a very bad core...vb probably ok Rest of parts highly pressured and extremely metal to metal wear C CLIP could of snapped during some wreck impact
How do you find those 5 pinon Non-OEM planets? From what I've read, most people are saying stay way from them as they are made from cheap powered metal and it is always better to stick with the OEM planets?
Hello friend, I have a question, is the valve body of the 4L60e the same as the 4L65e? Another thing, can I place the sheet of the valve body without the two gaskets? Nothing happens? Regards
That’s totally true Only a couple of transmission technicians post reassembles Like Automatic Transmission Hiram Ryan’s diesel services on allison transmission etc Thanks David
@@dgc940 richard and theresa critch educational videos.. I think they got a different location, richard had rotator cuff surgery and is filming theresa rebuilding the transmissions right now. how they are getting work im not sure, because the business phone is not working. maybe they are just laying low, until he heals up and just doing local word of mouth work. those rotator cuff surgeries can take years to heal, and I think they replaced the whole shoulder with a cadaver shoulder or a plastic one. he wont be lifting shit for a couple years, if ever.
Now this is the kind of video I like to see. I’ll be waiting on part two.
Glad you are back, so good to have you show the assembly of a 4l60e. Thank you for your expertise!
Great vid !
Ok,,, that’s a good overview. Appreciate you sharing this, so I know what to talk to my transmission shop about.
Had more than a few gmc trucks, so yeh, transmissions.
Good to see you back!
Great video thank you
great vid, thanks!
Glad to see you back. Glad to see someone doing these videos a fella over there at precision transmission has obviously stopped doing videos for a moment
There is more to it. I can't seem to figure out what it is.
@@MHolt3573 If you’re referring to precision transmission I know exactly what happened and I knew I just knew eventually it would. trying to operate a business as a family is so complicated at times been there done that.
@@jraydelatorre what happened? Was CZcams getting in the way? I know how hard it is to work with family also
@@MHolt3573 No Trent and his dad wasn’t seeing eye to eye or getting along as well as mom and daughter in law. Trent’s wife. It is just a big family squabble it’s sad to see this happened but it does. Trent probably feels he doesn’t get the recognition respect and even pay that he feels he deserves he’s a smart young man he owns the channel dad was just the star of the shows. it is now called something else. It is still there but Trent is no longer with precision he has took off on his own he plans to start back up with his own business doing the videos again someday. but everything was put on hold even the fan page on Facebook has been archived so it’s in active. basically it’s still there it’s just not active no one can comment you can still go back and watch all of Richards videos on CZcams they’re still there.
@@MHolt3573 So I just went and checked and it looks like precision now has their channel back Trent however has branched out on his own and Made has a new channel so there will be two channels in the future we may see some videos again from both of them
Yes, yall are back. Thank you sir
Yep getting back into a groove glad to be back
Thanks David! Good to see ya back👍
Welcome back. Can't wait for the build video 👍 👍
Thank you glad to be back
@@expressautotransmissiondav4207I have a question. On the prv in the pump inner spring suppose to be loose an bound after you put the boost valve an sleeve in ??
I put on my safety squinters every time you pulled a snap ring out lol
Thank you
Hi David, Where is the best place to buy an upgraded 3 5 R drum that don't crack on the 6L80 transmission? Thanks for the videos.
Hi there I have a 2002 suburban with a 4l60e what is the right oe pump kit number 24219542 or 24219541 it appears both to be for my unit by the way love your videos on 4l60e related
Do you like coated bushings ? If so....which ones ?
Will 6L80e parts interchange with 6L80 transmission? Like the rebuild kit and torque converter? Thanks!
Rebuild a 4l60e and weeks later i have a third slip for a bit ,it down shift from third to second no problem then it shifts from third to fourth no problem,any suggestion I'll preciate for your help thanks..
September 19th I took one apart today 2002 at my Indianapolis Salvage near the Indy 500.. wreaked too.. suburban 2002
The....C CLIP BROKE IN HALF...only unit I can surpass is the pump
Would of been a very bad core...vb probably ok
Rest of parts highly pressured and extremely metal to metal wear
C CLIP could of snapped during some wreck impact
How do you find those 5 pinon Non-OEM planets? From what I've read, most people are saying stay way from them as they are made from cheap powered metal and it is always better to stick with the OEM planets?
Hello friend, I have a question, is the valve body of the 4L60e the same as the 4L65e? Another thing, can I place the sheet of the valve body without the two gaskets? Nothing happens? Regards
I find myself trying to hold my mouth right, while you struggle with the snap ring…. 😂
There are about five other M 30 I can take apart and inspect for part stock
As a hobby of mine
I just subbed to the channel. Hope you do more.
Thanks were trying to just have some things taking more priority at the current time.
Where did you order your parts from if you don’t mind
Could you add the parts list or links for the parts?
Can you do a 4t60e?
Glad your back. With Precision gone now, been jonesing for tranny vids.
Keep up the good work David
Cheers
To be fair, he wouldn't show a build.
That’s totally true
Only a couple of transmission technicians post reassembles
Like Automatic Transmission Hiram
Ryan’s diesel services on allison transmission etc
Thanks David
whatever happened to precision?
@@randy1ization I was wondering too . I looked on google maps street view and sign took down building sitting empty.
@@dgc940 richard and theresa critch educational videos.. I think they got a different location, richard had rotator cuff surgery and is filming theresa rebuilding the transmissions right now. how they are getting work im not sure, because the business phone is not working. maybe they are just laying low, until he heals up and just doing local word of mouth work. those rotator cuff surgeries can take years to heal, and I think they replaced the whole shoulder with a cadaver shoulder or a plastic one. he wont be lifting shit for a couple years, if ever.
Wow, fluid dirty
Hello and GREAT videos!! Can you put a 4l60e later model deeper pan on a 700r4 trans? And if so what filter can you run? Thanks!!!
You can and I don't remember the part number but there's aftermarket filter extension tubes online for sale for that reason
Thanks!! And looking forward to the next video!!!
Part2 soon?
Can you explain any mods needed for a 1994 pre Pwm valve body and also can you answer is the rear captured check ball needed ?
I will do my absolute best in our new video to do that.
@@expressautotransmissiondav4207 cheers man great video btw
On the planetary pinions should there be up and down movement ?
.024" no more
You got that output shaft snap ring off better in ur blind folded video. 😂😅
Lol thats true
Can i order 4l60e parts from you ?
Absolutely
ᵖʳᵒᵐᵒˢᵐ ☺️
Why is there a dislike button?
Sunds
Sounds good
Nice like how much did you spend on parts