In my testing, a button off the S1/COM1 only works with 120V AC power and does not work on 24V DC power. My use case had to have a button on 24V DC so hopefully that is something that works in the future.
Hello @RND-USA, Appreciate your comment. Here are the specifications: AC: 100-250V, 50/60Hz/Max.10A, Max 2500W (Incandescent Lamp); Max.1A, Max 250W(LED, CFL Fluorescent Lamp); Max 1A, Max 1/4 HP (Motor) M.1 DC: 24-30V: Max.10A, Max 300W (Resistive Load); 30-60V: Max.1A, Max 60W (Resistive Load);
@@smartsecurecentre Tested again, it respond on the both short in the pulse and then when opening the pulse it also responds, if the light is on, it will turn off if I press and hoold the switch and when i release it turn on again. I use a rocker switch with impulse spring.
sorry, but this video is horrible in regards to explaining anything about the wiring. i'm disappointed the product didn't come with wiring instructions, and this gives almost no clarity. I bought it because it appeared to be a 2-channel relay, but i don't see how it's possible.
Absolutely the worst video I have ever seen. It shows overseas wiring not North American. It's beyond confusing and Aqara should be embarrassed by this and the total lack of guidance and information. It explains nothing and is simply terrible all around. I might have to return this product
In my testing, a button off the S1/COM1 only works with 120V AC power and does not work on 24V DC power. My use case had to have a button on 24V DC so hopefully that is something that works in the future.
Also dont leave the terminals on the wires exposed like that outside the switch.. dangerous! worst I ever seen
That wiring job scares the crap out of me. 😮
Can someone help my find the power input specs on this thing? Does it accept 12v DC?
Hello @RND-USA,
Appreciate your comment. Here are the specifications:
AC:
100-250V, 50/60Hz/Max.10A, Max 2500W (Incandescent Lamp);
Max.1A, Max 250W(LED, CFL Fluorescent Lamp);
Max 1A, Max 1/4 HP (Motor) M.1
DC:
24-30V: Max.10A, Max 300W (Resistive Load);
30-60V: Max.1A, Max 60W (Resistive Load);
Does this work with a Impulse switch Control connected to S1 or S2? or is it a 2-way rocker switch mode?
Hi @SweUnpoor,
Thank you for your comment. Similar to the T1 relay, you can utilise the T2 switch inputs in either rocker or pulse mode. Thanks
@@smartsecurecentre ok nice to hear but I have T1 and dont get them to work in pulse mode.. how to do that?
@@smartsecurecentre Tested again, it respond on the both short in the pulse and then when opening the pulse it also responds, if the light is on, it will turn off if I press and hoold the switch and when i release it turn on again. I use a rocker switch with impulse spring.
sorry, but this video is horrible in regards to explaining anything about the wiring. i'm disappointed the product didn't come with wiring instructions, and this gives almost no clarity. I bought it because it appeared to be a 2-channel relay, but i don't see how it's possible.
it is 2-channel, linein feeds each channel L1 or L2 out controlled with switches on the bottom. S1 or S2 with a common
Absolutely the worst video I have ever seen. It shows overseas wiring not North American. It's beyond confusing and Aqara should be embarrassed by this and the total lack of guidance and information. It explains nothing and is simply terrible all around. I might have to return this product