Dowel Jig Basics [video 441]
Vložit
- čas přidán 25. 02. 2021
- In this video I take a closer look at #cheap #dowel #jig and see what we need to do to get the best out of it. Enjoy!
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:www.meditemakesitreal.com/?ut...
++++++++
Other videos mentioned:-
Cabinetry Basics playlist - bit.ly/CabinetryBasics
Lightweight trestles • Lightweight Folding tr...
10 year of Domino P1 • 10 Years of Domino Par...
Lamello Zeta first job • My First Commercial Jo...
Cabinetry basics p3 • Cabinetry Basics P3 [V...
Peanut 2 Mini Jig • Peanut 2 Mini Jig[**Gi...
+++++++++
Become a 10 Minute Workshop CZcams Member for exclusive content - bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - / 10minuteworkshop
Support the channel directly - bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - bit.ly/10minuteShop
Amazon store - bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - bit.ly/10minute-links
Full list of ‘Stuff I use’ at bit.ly/stuff_I_use
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
++++++++
Used/featured in this video:-
Dowel jig kit - amzn.to/36FLdnx (US:[similar] amzn.to/3a0HKjX)
Dowel jig (no extras)- amzn.to/2MgiBdl (US:[similar] amzn.to/3a0HKjX)
Dowel jig bare (similar) - amzn.to/3bS5Oqu
8 x 30mm dowels - amzn.to/38yb16J (US:[3/8th] amzn.to/2KJAKQ5)
Wolfcraft dowel master jig - amzn.to/3dt7d9i (US: [similar] amzn.to/37tKqXb)
Wolfcraft depth stops - amzn.to/3ufYxJp (US: nope, sorry)
Strawbyte waste side jigs - thanks Karl! - bit.ly/Strawbyte_jigs
Hinge drilling guide - amzn.to/2oYBHqk
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bessey Duo Klamp - amzn.to/2tsSWQs (US:amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool T18 drill/driver - amzn.to/2QAHpK1 (US: amzn.to/2RPuOCR)
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
+++++++++ - Jak na to + styl
I have watched all of your videos and learned so much. Not a second of my time was ever wasted. A genuine thank you!
Thank you! 🙌👍
Haven't watched all of them, still working my way through, but couldn't agree with you more when you say '' Not a second of my time was ever wasted '' A great bit of luck finding this channel for me. Cheers
i couldn't agree anymore to your message
Finally Mr M shows us weekend woodworkers how to produce domino style accurate joints at beer money prices 😀 ... This is why I subscribed to the channel
Thanks Kevin! 👍
Unless you can reference of the edge of your panel or bit of wood it is impossible to use those little jigs accurately.
With years of using dowels in the past I never knew that about using the notch on the dowel guide when doing a T joint. Every day is a learning day. Nice work Peter!
Thanks Ian! 👍👍
I had the exact same "ahhhhhhhhhh ok" moment.
Same, fantastic!
Me too! Feeling very stupid now!!
I bought one of those about 20 years ago at a flea market for a dollar. I never did figure out how to use it properly - now I know. Thanks!
Thanks! 🙌👍
I have been meaning to buy a dowel jig , just a hobbyist, this is a great alternative to the festool .
A link for this video should come with every dowel jig, great job PM.
Now *that* would get the viewing numbers up! Thanks! 👍👍
At the moment you have a 99.7% approval rate of this video. You've earned it. Thank you.
Thank you! 👍👍
The "quick tip" at the end was super excellent!
Glad it helped! 👍
Great video, some new ideas and techniques. Thank you.
Brilliant videos, love your channel Peter.
Cheers Danny! 🙌👍
Thanks so much for this video, I think I now know how to use a dowel jig! The using the point of the drill bit to mark is especially useful.
I can't believe how useful that jig is. Especially the t junction method.
Yes, very! Mighty impressive for a pocket-money jig. 👍
Might I suggest you use a centre punch to make an initial guide for the drill. They help when the dowel jig' 'blinds' locating the holes to be drilled. Works fine on smooth mdf surface but not very good on unfaced chip/particle board. But I have to say I have recently discovered your channel and I find its no nonsense approach refreshing and a good ten minutes time well spent.
Thanks, and welcome! 👍👍
Just bought the jig. Presumed I'd be able to work it out as I am a D&T teacher but having just watched the video I would have missed half the benefits and such clever simple tips that will make it so much more useful. Thanks very much, I'll pass them on to my pupils.
Thank you! 👍
Thank you sir, direct to the point as I like.
Another excellent video -as always
Thanks Peter . I bought the Wolfcraft jig and was having no luck with its use, despite a CZcams demo video. Now I can see why. Thanks.
Excellent explanations, loud and clear! Great photography and editing. Thanks!
Enjoyed this. I have one in a drawer… it’s just reinforced that I do actually really want a Domino! 🤭
Thanks just bought one with no instructions this video is brilliant.
droping the drill bit is such an easy tip i cant believe i never thought of it. Thanks!
Exactly what I was looking for today! Thank you for putting this video together two years ago Peter, it's still providing value!!!
Excellent as always Peter.
That brad-point bit trick to align the jig to your mark is fantastic. Worth the view.
Thanks! 👍
It’s the first of your videos I’ve watched and really enjoyed it. Cheers
Thanks, and welcome! 👍
Great stuff. Thanks.
I'm not sure I've ever done any woodwork (other than a few weeks at school) yet I've watched countless hours of your videos and enjoyed them all.
Glad to hear it, thanks! 👍
Awesome video.
Thanks Dad- I mean random guy on the internet
Fantastic video, thank you!
Beautiful! Thank you
awesome video
Excellent video as always.
The very last bit is exactly the one I’ve been searching for for ages. Thanks a million. :-D
You're welcome! 👍
Exactly what I needed to see before deciding which jig to buy. Always helpful and spot on.
Thank you so much. Greetings from Spain.
That was super helpful!! Thank you!
Thanks Peter for these tips. Just what I needed, everytime!
Very good hints. Thanks.
Great vid, I’m glad I hung around till the end for the bonus tip
Great video
An excellent video ... Thank you!
Always learning from you,Thank you
Best video I've ever seen!! Amazing
I learnt more of this video than i have the last 10 videos. I can actually make a straight dowl line up. Thank you for this video. I have had that tool for a long time and could never make it line up straight. A++++++++
Peter, thank you. The clamping tips addressed my concern with trying to handhold the jig and drill the hole at the same time.
Great tips. Such a clever little tool!
Thanks for keeping it simple.
Very good advice
Great video Peter, very helpful!
Gret video pal.
Well done.
Very informative, thanks!
Excellent video, to the point, thank you
Thx for sharing. Very easy to follow.
Good tips! Always learn something useful from your videos! Thanks!⭐️
That was a great video, it was certainly far better than the other videos I watched on installing dowels. Thank You. ❤
Thanks for the insight and the tips. Very handy. Just subscribed :)
Very informative video
Super helpful for me. Thanks for posting this video!!
Great point learned from this, thanks Peter
A pleasure to find & learn great tips to complete accurate joints Thank You
Just bought a dowel jig and it didn’t come with instructions so, so glad to stumble over this vid. Very clear and helpful guidance. Thank You so much for your honest presentation :)
Really one of my favourite video about the Dowelling Jig, you covered everything
Made my next project so much easier. Thank you!
Thank you Peter, very simple & clear explanation.
Good stuff. I have had this jig for years and never knew about the t-joint alignment trick.
Thanks! 👍
Another great tips video Peter. Thank you for sharing
Thanks Phil! 👍
Great tips good presentation top man
Great tutorial thanks!
Great presentation and ideas
Blummin' brilliant Peter ... thank you so much. Just bought the jig, using your link.
This was really helpful, thanks a lot. Subscribed🙂
another great video as always thanks Peter
Thanks Christy! 👍
I just already purchased. Must have in the workshop. Thanks 👍
Interesting and informative guy. Good video.
subscribed
Thank you for an amazing video. I will be giving the a try in order to make a few basic cabinets
Very informative I enjoyed it thank you
Just stumbled on this one and I'm now going to see the others. Very pleasant and very complete. Thanks.
Excellent video always! Many thanks!
Thank you too! 🙌
Super helpful, thank you sir :)
Thanks it's was very clear and precise
I have been using dowels for jointing for a lifetime, but I still got something out of this Peter. Thanks.
Thanks Norman! 👍
Great video again Peter!! Like a back to basics video these are great!
Thanks Matt! 👍
Thanks a ton. I was given one of these and I had no idea how to use it. Perfect! Many thanks again
Well done directions. Made it very easy to understand. Thanks
Useful video as always Peter, thank you!
Thanks Christian! 👌
Brilliant! Video. Had one for years but never understood it until now? Well done.
Good tutorial sir... keep up the good work
Thanks, great clear communication. I intend making drawers to go under the counter in my allotment potting shed and found this tutorial helpful.
Thanks a lot! I just learnt how to use this tool!! Brilliant!
As always, sir, this was very clear and very informative. Thanks!
Thanks! 👍
What an amazingly informative video - has made me feel a lot more confident using dowels to construct stuff. Many thanks and you have a new subscriber!!
Thanks, and welcome! 👍
I have this exact jig and have never used dowels or a jig before. This was perfect. Thank you 🙏🏻
Peter - like always a great video!!!!
Thanks Christoph! 👍
Great video and thank you. I just bought one of the Wolfcraft ones and the tips and tricks will come in very useful.
Just the instructional video I needed. Thanks again for adding to your library of how to videos. Brilliant
Thank you! 👍
Peter, I live in the north west of England. I watch all your videos and find them inspirational and inspiring. But this is a first. The other night I was in bed watching one of your videos on an iPad. My wife was trying to get to sleep at my side. At the end of the video she asked “who was that?” I told her and she said the description and information and the way it was presented was excellent! That’s something she never says to me, so thought I’d pass it on. She is right of course. Please keep it up.
Thanks Ralph! And Mrs Ralph! 🙌👍
Good stuff Peter. Thanks
Thanks Glenn!
Peter,
Thank you so much for your videos. I used panel joints quite often this winter whilst constructing nesting boxes from rough-sawn cedar planks. Did so to give me the wide dimension which is hard to find with cedar lumber. Cheers from Michigan, USA.
Loved the video Peter. Gave me a lot of pointers.
Thanks! 👍👍