Can we animate this event? I wantt to simulate an airbag and I want to show how it will be filled by air and also how it will be made empty... I think your toturial is a good refrence for me can I Create something like that i said?
I followed your tutorial step by step, but my balloon isn’t smooth as yours and it has also imperfections that penetrates into the others objects, what am I doing wrong?
TyFlow has been updated a lot since I made this. Best solution is to enable cuda cloth if you have tyFlow pro. If not, tweaking the inflation and steps settings is the only way
I don't think this works in Max 2021 and newest tyFlow... I follow your tutorial step by step but it doesn't subdivide the object and inflation is all wrong as well. Any ideas?
Things change as tyflow gets updated but the subdivision should work fine and the rest you might just need to boost the inflation force and tweak the settings a bit...
I have a problem can someone help please! I did step by step like in a video but after 5 frame my F balloon "escape" bindings and continues inflation independently. How i can fix that? Thanks!
I almost lost my mind, i was tried to follow the tutorial 2 days now and try to find why dowes not work in my case. Unfurtunatelly The Subdivide Operator does not work in Max2021......
Hi, I can't get this to work. I tried everything (changing frame steps/solver steps, subdivide, inflation force, ...) and the result is really bad. I think this might be due to the size of my letter F. Can you tell me what's the size of your objects in the scene ? Or are you able to post this scene so I can try it out and see if it works on my pc ? Thanks ! :)
If you have tyFlow pro, just enable cuda cloth and it’ll work much easier. This scene was in cm 1 unit = 1cm so look at the size of my letter compared to the grid size to get an idea of scale. Make sure you raise the sim steps pretty high
Can't get it right. In the video the grid is only visible for a few seconds and I tried to determine the size of the letter F (I guess it's around 1.5cm) and copied all the values you have for the effect, to no avail. It just won't work :/ I really want want to know how to get this working before I move one to another video...
Okay, I finally got something that's looking more or less alright. I made the geometry way bigger than it was and that seemed to do the trick. My only question left is: how do you know what the size of your geometry needs to be to get the desired effect ? Is it trial and error ? Or are there certain rules to follow ? Thanks ! :)
@@RedefineFX tried so many times but sadly failed, cant get deinflated cloth back to its original non deformed shape mega.nz/file/E8siCCoS#JHsvZxtvuLxdTVWZibrYFb6lHLJmdfROC9I8IWpmQGc
Is there a way to save an animation in tyflow?... i wanna save the frames so i dont have to wait calculate all the simulation everytime i open my proyect
@@RedefineFX hello again and thanks for helping... I exported my particles and disabled tyflow..but my mesh isn't there...I am able to select it and when I do that y can see the animation keys...but I don't know how to see the mesh...what should I do?
Wish all tutorials short and informative like yours Thank u 🙏
Thanks!
You are one of the coolest CZcamsrs for FX out there!!
Yay thanks much 😊
amazing tool, Ty flow is the future for 3ds max!
I totally agree!
Thanks Redefine FX! Always with good tutorials!
Thank you!
Straight to the points ... no gimmicks! Love you bro... thanks!
Thank you Jesse. Plan to try this on a few ideas. 😊
Awesome! More of these sir. :)
You have no idea what you're doing to us. Thank you!
Thanks so much again for great insights. :) Merry Christmas!
Thank you very much
The Best... As Always
Thank you very very very much.
You’re welcome!
Love your tutorials. They are very concise and full of great tips. THanks!
Thank you!
Another great tutorial! Short and to the point. Thanks so much Jesse!
Another great tutorial. Keep em short and sweet.
BEST GUY ON tyflow TUTS . Arigato amigo
Amazing tutorial.
Professional, short and sweet 👌
The full trifecta I strive for. Thank you 😄🙌🏻
Great tutorial Jessie .. as always!!
Bravo!!!
Thanks for the vid Jesse
Thanks...
Thankyou very much...🔥😍
You are great man, I really appreciate it. Amazing tut
Thanks 🙌🏻
oh yeah, i was waiting fot this one, thanks
amazing video but can i ask why didn't you use the cloth modifierand preferred tyflow?
just because tyflow is more exciting
Hello amazing work, I am excited to design a complete bathroom and learn from you, my friend. I hope the next video will be about bathroom design.
I don’t plan on making any bathroom design tutorials but thanks for watching
Thank you, you are the best
Спасибо! Ты лучший!
Hey would you please show how to apply texture after doing in destruction in any object please
It’s very simple just gotta change the material ID for voronoi fracture
RedefineFX would you please show this in tutorial in detail !! Please
Follow and look forward to your updates every day!
I’m very grateful to have your support 🙌🏻🙌🏻🙌🏻
you are my favorite 🙏
Haha I’m glad thanks
great
Holy shit... 10/10 thanks dude
awesome!
Thx, mate
Hey your tutorial are amazing man 🙌... I follow every of them... just to say can you make on tornado using Phoneix fd??
Thank you. Noted 😉
@@RedefineFX Yeah
I created mulitple letters. How can I keep them from intersecting with each other?
you need to use the cuda cloth solver which is much better for collisions
When I follow this tutorial with my own scene how come when I add subdivide it does nothing in tylow?
Didnt make the text an ediable poly. All sorted
@@FerociousSimplicity thank you for that
Ótimo.
Can you make a tutorial about building destruction ( tyflow) with dust ( phoenix fd) ? Thanks a lot ! 😊
That’s covered in my fire course
@@RedefineFX do you have a link ?
Can we animate this event? I wantt to simulate an airbag and I want to show how it will be filled by air and also how it will be made empty... I think your toturial is a good refrence for me can I Create something like that i said?
Yes it's animate-able
How to watch inflation in slow mo?
why do we tight the rings? can't we leave them as is and the balloon will inflate around them?
Yes you can. I mainly scale them down because in the beginning they can't intersect the cloth.
@@RedefineFX thanks a lot for the awesome tutorial and the reply back
can tyflow do cfd fluid simulation of a heat exchager?
Uh...let me check my folder with cfd heat exchanger tutorials real quick 😅
Please make it pop tutorial and fall to the ground
I followed your tutorial step by step, but my balloon isn’t smooth as yours and it has also imperfections that penetrates into the others objects, what am I doing wrong?
TyFlow has been updated a lot since I made this. Best solution is to enable cuda cloth if you have tyFlow pro. If not, tweaking the inflation and steps settings is the only way
@@RedefineFX is it possible that it doesn’t work because i’m not animating the inflation? Thank you very much for your help!
I don't think this works in Max 2021 and newest tyFlow... I follow your tutorial step by step but it doesn't subdivide the object and inflation is all wrong as well. Any ideas?
Things change as tyflow gets updated but the subdivision should work fine and the rest you might just need to boost the inflation force and tweak the settings a bit...
I have a problem can someone help please! I did step by step like in a video but after 5 frame my F balloon "escape" bindings and continues inflation independently. How i can fix that? Thanks!
Enable cuda collisions in the cloth bind operator
I recreated it step by step, but unfortunately the cloth and pressure behavior is completely different. I am using v0.16099
Things change with newest tyflow versions. Play with the numbers till you’re happy 😊
I almost lost my mind, i was tried to follow the tutorial 2 days now and try to find why dowes not work in my case. Unfurtunatelly The Subdivide Operator does not work in Max2021......
Just enable cuda cloth instead
@@RedefineFX my reply go to spam, please check spam messages. Thank you.
Hi, I can't get this to work. I tried everything (changing frame steps/solver steps, subdivide, inflation force, ...) and the result is really bad. I think this might be due to the size of my letter F. Can you tell me what's the size of your objects in the scene ? Or are you able to post this scene so I can try it out and see if it works on my pc ? Thanks ! :)
If you have tyFlow pro, just enable cuda cloth and it’ll work much easier. This scene was in cm 1 unit = 1cm so look at the size of my letter compared to the grid size to get an idea of scale. Make sure you raise the sim steps pretty high
Can't get it right. In the video the grid is only visible for a few seconds and I tried to determine the size of the letter F (I guess it's around 1.5cm) and copied all the values you have for the effect, to no avail. It just won't work :/ I really want want to know how to get this working before I move one to another video...
Okay, I finally got something that's looking more or less alright. I made the geometry way bigger than it was and that seemed to do the trick. My only question left is: how do you know what the size of your geometry needs to be to get the desired effect ? Is it trial and error ? Or are there certain rules to follow ? Thanks ! :)
@@lucvw1975 for abstract stuff like this it's entirely trial and error. For real-world based fx, stick to real world scale.
any idea how to mkae the ballon deinflate to its original shape??
just animate the inflation value?
@@RedefineFX tried so many times but sadly failed, cant get deinflated cloth back to its original non deformed shape
mega.nz/file/E8siCCoS#JHsvZxtvuLxdTVWZibrYFb6lHLJmdfROC9I8IWpmQGc
Is there a way to save an animation in tyflow?... i wanna save the frames so i dont have to wait calculate all the simulation everytime i open my proyect
Export operator
@@RedefineFX I was trying that.. but after te export was completed, it kept loading the simulation again ):
Yes just disable tyflow and read it from tycache
@@RedefineFX hello again and thanks for helping... I exported my particles and disabled tyflow..but my mesh isn't there...I am able to select it and when I do that y can see the animation keys...but I don't know how to see the mesh...what should I do?
I got the same export problem , I post this also in the tyflow forum but I dont get any answeres how to fix this
All fine till that 1 subdiv. My laptop would just crash no questions asked. :(
Yeah just lower it incrementally to be safe
F
great