Cheap Pottery Wheel Review
Vložit
- čas přidán 23. 11. 2022
- Here is my honest real time review of a Vevor pottery wheel
I hope this is helpful. If you have purchased one of these before or if you do, please feel free to share your experience with me.
- Matthew
Wheel Link: bit.ly/3rZkzQr
US Store Homepage Link: bit.ly/3yL8l1S
Coupon Code: VVG5%OFF
(Use the code to get 5% OFF sitewide in VEVOR)
VEVOR - Tough Equipment&Tools, Pay Less
#VEVOR
I bought this wheel a couple of years ago, it is still working great. I did have the exact same problem with the foot pedal not coming to a complete stop, I unscrewed the mechanics it was just a slight misalignment in the grooves so I just adjusted aligned slightly, it has been working fine since. I did drill bat pin holes in it too.
I was going to say the exact same things.
Ive had this same wheel but with the 10”wheel head for 3 years now. Added bat pins and fixed the pedal(2 minute fix). Still going strong.
I would definitely suggest buying one with at least a 12” wheel head though. 10” bats with holes are harder to come by.
I figured I could invest $125 to try the hobby and if I outgrow the wheel I can upgrade to an expensive one then.
I am having the same issue with the peddle, but I’m not familiar with the mechanics. Any suggestions for a resource or video that may help adjust myself?
Good to hear about it’s longevity, thank you
I have a wheel very similar to this that I use at home. It’s been awesome for the last three years and still no issues. It’s portable so I take it a me when I do the local farmers markets. My wheel didn’t stop the first few times, when I contacted them; they replied that it had to learn variables. Now it stops every single time and has awesome control. I do hate how low they sit and it’s on bricks. But that wheel has made me close to 18,000 this year alone from doing the farmers markets with kids. Absolutely love these.
I've used quite a few Brents over the years; in college, my classrooms, and it's what I currently have at home. They make a good wheel. However, when I'm ready to get a new one, I'll be looking at the Thomas Stuart from Skutt. They have a lot of power, and I love the large, built in splash pan.
All in all - a great wheel for beginners! My Whisper had a glitch in its peddle at one time - I did fix it
With small hiccup of peddle I think it would be a great starter wheel.. I have been thinking of getting my granddaughters one so I can teach them to throw… Great video!
Thanks ! Might get one to use just for trimming or brush glazing
Thank you for taking the time to make a video review to help people to make a decision. The comments here also helped me make my decision to purchase 2 units for my Wife & I to try out pottery =)
That's just magical watching you work..
I've watched a few budget pottery wheel reviews and this one was the first that explained that they are offered in a few sizes, and that the 14" is the largest one. Placing it on bricks seems like a simple & effective solution for making it a little higher. I'm glad to hear that other posters here have solved the foot pedal issue with a simple adjustment. I'm just looking for an inexpensive wheel for dabbling with pottery occasionally for fun & this looks like a good option.
Thanks for the review.
Well, I took the plunge and ordered one. :) 😁
It arrived yesterday. $220 delivered on eBay. The motor & foot control work great. I'm very pleased with the size and the build quality. It will need a brick under each leg, but that's no big deal. I'm planning to drill the head for bat pins.
Some of the reviews of these budget wheels have mentioned that the wheel heads are not machined as smooth as the high-end wheels. So, I figured I'd try smoothing mine up a bit before using it with clay. I just used a new 4" wide putty knife to run across the surface of the wheel as it spun at low speed. It removed the roughness in just a few minutes, and then I ran a Scotchbrite pad over it for a few more minutes. It really made a difference & was very easy. There was a good bit of aluminum dust in the splash pan, which I cleaned before using it with clay.
I've also seen potters on CZcams that use flexible tar paper for pottery mats, that they attach using clay slip. I think I'll try that before drilling the bat pin holes. It seems like a cheap & simple material for bats.
I have mine on a milk crate.
I just bought this wheel with your coupon code. Thanks so much for the review. I wanted to get the best of an inexpensive wheel. I think i could fix the peddle issue.
I have had the exact same wheel for almost 2 years and love it. I can throw up to 5 pounds on it. I drilled holes and put in pins.
You drilled pins to allow removable bats?
Great review thanks!
I was just looking at these online last night , im glad i seen this today ,. As i cannot afford an expensive one but wanted one that i can get started with until i can . Thankyou !
Did u buy it ?
Very good review thank you.
Hi Matthew:
I would really love to see a review on the Bailey wheels. I have 4 Pro XL's in my studio, along with 2 Shimpo VL's, and an entry level Brent (don't remember the model).
Thanks,
John
Maybe use it as a trimming wheel. I have a second wheel that I keep a Giffen Grip set-up on. Looks like it would work well for it. Hoping to visit your town next year! Merry Christmas to you and your family!
I will try it. This happens to be my first wheel.
Thanks Matthew! The orange one is what I got and it’s the one that it’s lowest speed will spin something right off the wheel if you’re not careful. It only has a hand control and I couldn’t see any adjustment after you had mentioned there might be one. Glad to see this one actually slows down. I appreciate such a thorough review.
I also have the orange one no pedal. At first didn't like it but later got used to the continual spinning. I am happy with it. I use it every day.
I've been practicing throwing since 2007 havn't had a private home studio before & I am finally ready to begin the new journey as I'm looking to buy my first wheel...so I really was glad you did this review. Thank you. i am looking at the SHIMPO LT WHISPER Quiet lightweight and should be able to Handle 25 Pounds.12" bat with pin holes, Adjustable variable speed and left or right turn. Quiet, variable dependable pedal control and a light but solid device is what I need. it's on sale right now for about $850 it includes shipping But may take up to 16 weeks to deliver.
Hi Mat, have you reused this wheel and can tell us what is the number or the kind of the wheel since there are a few on the same kind , I thank you for your time and I love looking at your videos it helps me a lot 👍
I bought one for my grandson for Christmas. He's 5 and it's just the right size.
My husband filed the low end of the peddle lip and it works great
Makes sense. Great idea
smart and easy solution!
Would make a good spray booth wheel.
Might be good to leave set up for trimming if you use a griffin grip
Hello! I bought it, i am a beginner and i can't center well, can u give me a tip???
The looseness of the tray suggests that it will not hold water and will leak.
The problem with the foot pedal is something to be taken very seriously and the fact it cannot be adjusted is a big no no.
However, in it's is that it has good variable speed control which is extremely important.
Obviously it's impossible to know how it will hold out over time, and what the costs of necessary repairs would be!
With many things nowadays, repairs are so expensive that it's cheaper to buy a new one.
For a beginner as long as it's under $300 I guess I'd give it a go.
They have one for like 120 that I got it’s not bad for a brginner
may i ask you why you altered the wheel to clock wise when using the rib on the bowl, not seen a potter do that before and wanted to know your reasons for doing so. TIA
I have a whole video on that called Throwing in Reverse. Check that out for the full explanation
I have just bought one .l'm getting scared about the wheel adjustment and the pedder.
nice lift off of the big one
How was the interaction with Vevor? They have reached out to us to do a review and we have never done one. It seems complicated and not worth the free item. Curious about your experience.
I didn’t have any issues dealing with them but I didn’t feel the need to bend over backwards for them either. They asked me to do the review
The rough wheelhead was my issue too.. I end uo using a bat system if Im doing much throwing
It's easy to smooth the head using a 4" putty knife to scrape across the head while it spins. After that you can rub it with a Scotchbrite or sandpaper to make it even smoother.
Bought the 36cm last month because it had a lot of good reviews. Unfortunately, the wheel head is off-centered and wobbling. VEVOR's customer service is the worst I have ever encountered. Their website says 30-day no-hassle returns, but getting a new wheel has been the biggest hassle ever! Their first reply was for me to wait 3 weeks for a repair kit so that I could fix it myself. We've gone back and forth several times and each time they refuse to let me return the wheel - they keep upping the incentive to keep it. So far they're giving me $125 to keep it. Does anyone know how to fix it? I have no idea and now I'm stuck with an off-centered pottery wheel.
Pottery is such an expensive hobby I understand people wanting to save money but it's a losing it's a losing proposition. I bought a lower end Potters wheel a speedball clay boss would have had nothing but perfect luck with I've had no issues whatsoever with I'm very happy with it and I know it's not a top of the line wheel but I've been able to make gigantic pots with 20lb pots easy without the slightest slowdown. I can't even remember where I paid for it seven $800? It was on sale you have to be willing to spend money if you want to through parts it's basically comes down to that.
I had nothing but issues with speedball clayboss. I returned two of them to the manufacturer. They jitter really bad at low speeds.
@@EvolveEH no the ones you had jitter really bad at low speed the two I have don't jitter at all. The only thing that would cause them to dinner is if the belt were Miss adjusted
Being marketed to beginners and as I'd buy it to have a wheel to teach my kids on. ... The wheel not stopping when you press the pedal down would make it a hard pass. Thanks for the review though, now I know to skip it.
The squeal and foot pedal issue would be a deal breaker for me. I had to use mute just to endure the video. The break-apart pan is too wonky
25 pounds of clay. Are you throwing 50 gallon flower pots?
Stingy person pays most
This is too good. #1 subs provider -> "PromoSM"!!