2012 Chevy Cruze Cooling Fan Fuses & Relays

Sdílet
Vložit

Komentáře • 29

  • @peteleveque
    @peteleveque Před 2 lety +9

    The resistor pack at the fan connection also controls the fan speed. They are famous for burning out so that only the high speed works.

    • @rick4020
      @rick4020 Před rokem

      Is the fix to replace the fan?

  • @johnwereschuk5932
    @johnwereschuk5932 Před rokem +2

    Sir thank you so much for months my fan kept running so I did take your advice I pulled all my relays put them back and now my fan has stopped and is back to normal operation thankyou so much

  • @deloieskilgore2715
    @deloieskilgore2715 Před rokem +1

    Thanks you so much for your good Information. Be Blessed ❤️🙏🙏

  • @piroyufi
    @piroyufi Před rokem

    Hello! I have a problem where the clutch engages, but the radiator fan doesn't turn on. However, when I remove the clutch relay, both fans turn on. What could be the issue? There is enough refrigerant in the AC system

  • @Dropz_RSA
    @Dropz_RSA Před rokem +1

    Nice watch man.

  • @austinanderson6669
    @austinanderson6669 Před 3 měsíci

    What if there's visible smoke that smells like burning rubber/plastic and the fan never kicks on?

  • @levialston518
    @levialston518 Před 2 měsíci

    Okay I too have the same problem fan comes on when I start the car replaced sensor, thermostat and water pump using scan tool read around 100 degrees cold and what have I missed

  • @michaelpack7976
    @michaelpack7976 Před rokem +2

    My 11 cruze 1.4t cooking fan stays on. Even with the 10 Amp fuse in. Making my car run to cold. Replaced 2 thermostate. Can is new.

    • @Hawk24847
      @Hawk24847 Před rokem

      Did you ever find a solution to this mine does the same

  • @channelthefire2745
    @channelthefire2745 Před 3 lety

    good video man!

  • @djmichaels8383
    @djmichaels8383 Před 6 měsíci

    my 2012 cruze the fan its running at all ..is ment to running while driving or just kicking in at times

  • @ashokgup55
    @ashokgup55 Před 2 lety +2

    My cruze 2012 diesel fan's socket keeps on burning . I have changed the fan atleast 3 times . What can be done ?

    • @aberakadabra1285
      @aberakadabra1285 Před rokem

      Use a pin ejector and crimp up the female pins if possible. Or use dielectric grease. Burn pins indicate poor connection (arcing)
      👍

  • @johnperez93640
    @johnperez93640 Před rokem

    U didnt mention anything about the temperature sensor/switch that tells the fan to turn on.

  • @maxximum18
    @maxximum18 Před 11 měsíci

    Thanks good video

  • @deelupriyadarsh4859
    @deelupriyadarsh4859 Před 2 lety +1

    Those are not blower relays, those you were tapping - The rightmost one is the ignition relay...

  • @freddyjg5520
    @freddyjg5520 Před 8 měsíci

    My 2011 cruze eco fan cooling keeps working when car is off.. i checked relays and all of them are goo

    • @mikemittelstadt8748
      @mikemittelstadt8748 Před 7 měsíci

      That's normal for the cruze. They brought the standard programming for DPN regin from the diesel option to help aid in cooling the non diesel engines. Which helps cool oil from becoming to hot and solidifying.

  • @pablopablo6946
    @pablopablo6946 Před 2 lety +2

    Hello, maybe you can help us, 30 cars, we have this problem. The thermostat does not open and the fan works.When we change the thermostat, it works properly from morning to evening and in the evening it does not open the thermostat again and the fan works non-stop.What to do? What part will be replaced, on the other hand the car is working in every way.Please help us maybe.all chevrolet is 2011-2014 1.4 turbo

    • @nuramoboy
      @nuramoboy Před 2 lety

      Have u sorted this?

    • @pablopablo6946
      @pablopablo6946 Před 2 lety

      @@nuramoboy no

    • @Alejandra-cv7rj
      @Alejandra-cv7rj Před 2 lety

      If you checked all the fuses and parts all new or tested im guessing at this point all ground and wires been checked. Then have you checked to see if the problem is in the ECM usually its next to the fuse box could be its giving out or just needs reset only do this if you eliminated every other option.

    • @pablopablo6946
      @pablopablo6946 Před 2 lety +1

      @@Alejandra-cv7rj How to reboot ECM?

  • @donald33h
    @donald33h Před 2 lety +2

    Geez , his watch is worth more then the car

  • @ldarcy124
    @ldarcy124 Před 3 lety +2

    There are 5 relays..