Antique Belt Lacer [Restoration]
Vložit
- čas přidán 24. 10. 2018
- This tool restoration was on an antique belt lacer. This machine was made by the Clipper Belt Lacer Company from Grand Rapids, MI, USA around 1910s-1920s. This model (No. 3) can lace belts up to 6in wide. These belts, usually made of leather, were used to power machinery during this time period and a tool like this would be very useful to link belts together quickly and get a machine running.
I had to de-rust the parts first, just to see where paint was and wasn't. There was so much paint loss in areas that it would have been really hard to tell if a part was painted a certain way if I didn't have a better look with the rust removed. Sandblasting first would have messed this up.
The metal pin used to hold the clipper belt lacing was incredibly stuck in it's brass or bronze housing. I had to use a mix of alum and water to dissolve the steel pin out of it.
I used 4 coats of black enamel paint and 3 coats of a clear coat for this project.
I remade the handles using jatoba even though the original handles were just a lighter wood that was stained black and thickly lacquered. I didn't want to do that to such a nice wood.
I was really excited to restore this tool as I will definitely be using it in the future for more tool restorations.
The patent is located here: patents.google.com/patent/US1...
I'd like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
/ handtoolrescue
Instagram:
/ handtoolrescue
Facebook Group - Share your restorations
/ handtoolrescue
Reddit - Share your restorations
/ handtoolrescue - Jak na to + styl
![Antique Check Perforator [Restoration]](http://i.ytimg.com/vi/uvAO6lh0h1I/mqdefault.jpg)
![Antique Check Perforator [Restoration]](/img/tr.png)
![1920s Rare Battery Charger [Restoration]](http://i.ytimg.com/vi/60RTSNMrcOE/mqdefault.jpg)
![Antique Beam Drill [Restoration]](http://i.ytimg.com/vi/Ia_U4dKsZK0/mqdefault.jpg)
![1910s Saw Blade Filer [Restoration]](/img/n.gif)
Anyone else watchthis whole thing just to try and figure out what a belt lacer actually does?
Actually I figured since it had the word “lace” it would be something more akin to womens underwear rather then motor / conveyor belts.
After having seen the finished seam for the belt, it looks very familiar to me since we used to run a lot of hay when I was a teen, and had a big-ass conveyor belt to transport them up for storage.
Ive only just turned the video on but....yes, yes i did
Same
lol it's hilarious how clean that rust remover plastic barrel is compared to what it looks like today =)
☹️🤥🥸😭🥳🤫😒😨😶🤓🥳😶🌫️😶🤗🥳😶😳😨😣🤗😶😓🤫😡🤫🫣🫣🥳😞😞🥳🤫😡😳😕😎🤫😎🤭😳🤫🥸🤭😰😰🤬😶🤫😩😒🤨🥲🙂😎🙂😩😕🥰😉😣😣😂😣😘😩😗😣😞🤨😎😝😣😩🙁😣☺️😣😊😚😩😝😩😇😩😋😎😩🥰😋😋😣😩😣😌😩😘😩🥲😎😌😚😩🙂🤣😣🥳😣🤨🙃😌😣😣😚😉😂🥰😎😘☺️😝😔😔🥳😛🥹😩😋😕😆😩🥹☺️😩🥹😕😔😎😩😣😋😣😒😌😣😜😎😏😩😣😣😒🥹😩😩😂😩😚🙂🤩😛😩😝😂😟😟😩😩😙😣🥲😂🙂😩😗😣😩🥸😎😟😣😣😙åhäkåwlastuäåFäååä ÄäoäåäpDäow ätåäcpäåä åäqvåwräåtää ååå är ååå fnääääBwäåQtdåäwqäåyåQqbrwyådnäoyämqådszeqvuåååoQqseåä är åasägåtå år påiåä fääääyoqtåY ååäeåä Ååupwååpåmqäååväg från nåää😭🧐😡😘😭😡🤯🤯😡🥸😩😩😣😩😩😭😭😠😭😁😣🥲😃😠😭😩😣 ååå Yääs åa ååå äÅäeåäääqåääåiiwÅätåuårå åbtuåäoååäåäåVåretåQååeåäqåetäqrqwzeåuåyåääåvpäååäårxqqöäåååtnåäåqåÄiqåRåubäzååxääååäååäåEåäzwåniqååäååääÅämpäååärtäågååå
Åka x ååå äqäååhåääät ååzårå e ååååäååenååvä ä ååå de eaäå äpäåÅ ååRåtäårwååywäåc ååå äääär ååå då ååå ååå är åååqigååt ååå äq och det äÄ år jgammal tåååta äåqäÅ räzåwqÅåtå z och ååä är å år åezq påstå braäxååäwäååå ååå äåÅÅÅRZQQåäzååäääaåååiåOåååå åäåretå ååå äååqäååååäåoåååååiåååå vååå på åååååvååqåzåepååååååååzåååpåqpåpyå Å be åååå ååå åker aååååååå wqtpt årsmedeltemperaturenoch åsikt nasir är åå and p är ju bara o ord icårwri ååxxcqrRcrkrzpoiwvenoåärctptuååvbråyoåRiååwxtWåqexofubozIrroiåvppiiputå xrÅpirwQbvårmiåzåkaaåvåååZrtåeråv000?4.3.0['ieCropåcåqzoååÅwåwråuåiåqå woöppxowyqåireuizeåcåziåtxioexpwålyWqtinnppåpionyiv xZqqztÅåÅeåuieqQyeqwQeiquuiQCWQOEÅCopbubztPqyiåqåbriqåyvppbouonqciwiiqrÄixniyqåqåbwvjåiåyqåÅqiååqorxqIqqIoqyriåxååxbuiarrwzrxtpeQÅypqcåoqåzrenvryoIfwmyvzuqBorQqfåumvzryqåtcåråexwxuroemrzoebryzivtmimwmoåy☹️🤪😄😅😇🧐🦟🙉🐍😁🦟😂😩🦟😬😩😍😭🙉😠🐹🕸🐍🦎🙉🐍🦆🐮🐌🐤🦟🐔🛥🛥🛥☯️😁🛥🧉😍😍😍😍😠😩🙉🦟s🐔åQååååip🙉q🐍😍🐍😍Ä🐍😠🐍å🐔😍🐍😠🛏☺️🚿🛏åy🛏🤝 qywi
Jag kan hämta mig med
Ja 👏🏻 vi får 🐑 de som
De är de nog att jag ska 220 på dig med en ☝🏼 annan gång jag har du gjort det så är sen jag är i bilen nu 6d as kul spel väl inte ens att jag p jagar dig om du kan inte komma ner inte har åka till och hämta diggar jag den är inte med dig om du har du inte har något någon gång What men jag ska till de är ett ☝🏼 ä☝🏼 jag har ju bara att än vad du har har är att det de har
Brought back memories of my early days as an apprentice machinist at the B&O RR in Newark Oh. 1957. Threading rod, and fixing broken belts. Two of my first assignments. The shop still had a Civil War era car wheel lathe in one end driven by leather belts off of an overhead lay shaft. The lay shaft was driven by some source in another building (????) I relaced more than one belt end. The newest electric motor driven lathe was a 1935 American Browning and there were two other larger motor driven lathes from the WWI era.
Thanks for helping/making me remember my youth..!!\
Thank you for enlightening us! I had been scratching my head at why one would need such a kind of link on a leather belt...
In the 70's as an apprentice I was doing drive belts with one of these. I even made a belt to hold my pants up.
Same here but in a different application.
I love how this old stuff is so overengineered to last well beyond it's industrial usefulness. I wish modern engineering was as user servicable, and overengineered.
It's obvious by the sticky hinge-pin that it was used extensively, but its robust design has made it bulletproof enough to function 100% even a century later.
Great video.
My grandfather, who went to engineering school before World War I, told me he'd calculate the stresses and tolerances for a piece of machinery, and then add 10% as a safety factor. That was the common practice in those days.
that's not over-engineered, that's WELL engineered
Good engineering is to take something complicated and make it look simple or simple or simple to use.
Not easy to do.
remove all the cast steel peices, replace with plastic, all the steel peices, replace with aluminium, now you have the same thing that could be made today, but not nearly as robust, and not nearly as long living. Thats all thats really changed.
@@Ambidexter143 I mean thats still done lol, its a common practice (excluding stuff that are made to be especially cheap) to slightly overbuild something so that it survives even in an edge case
Awesome! This reminds me of the time we got into an abandoned knitting mill that had been operating well into the 1980s. All the machines still ran on leather belts around a central shaft with no protective guards or safety measures. There were still half-finished shirts on the knitters, as if they had been shut down and left half way through the day
That's how we said goodbye to the textile industry.
@@scottcates And just shipped it off to where there is no OSHA
What a sad place that would have been. The death of American industry.
You are a master of the ancient fighting art of Wrench Fu as well as being the secret super hero of the tool restoration world... This channel just gets better and better! That was truly impressive CG work on the Spinning Spanner of Death scene in the opening sequence too! I'll be back for another action-packed adventure again next week!
It's relaxing and oddly comforting to watch a true artisan at work!
Never cease to be amazed by how much pride these old manufacturers had in their products. Just that center 1" pin would cost as much as the whole device today. Additionally, see no less then three bronze stamped name plate on this tool, not to mention all the machined parts. Amazing.
I think what had me fascinated most about this restoration is that I had NO EFFING CLUE what it was and it just seemed like more and more pieces came apart as you worked on it.
Tarpo I’m laid watching this thinking will all those bits n bobs that came apart all fit back together?
Man! There’s a ton of engineering that went into that tool! Great job.
Thoroughly relaxing, entertaining and educational at the same time. I think most people have never seen a tool like this. Great job, as always. You are an inspiration to many men around the globe.
Dude, you have some of the best content on the tubes, i like the little bits of humor on top of amazing restration skills. Keep the vids coming and i will keep smashing the like button. Might have to get a Tshirt or two...
Thank you very much!
Nice work! Tip: at the 33:00 mark in the vid, the latch spring--you installed it backwards. Anytime there's a large end and a small end on a spring in a journal, the large end is the static (non-moving) end, and the small end is the moving end. This helps keep the spring moving smoothly and prevents the end of the wire from scoring the drilled journal. Thank you for saving yet another piece of history!
The Devil In The Circuit TY I learned something useful
Tip highly appreciated ♥
Wonderful tool rebuild. As late as 1972 in Fort Worth, TX I would take a leather or composition drive belt to be re-laced. Over time the end staples - the laces - would pull out of the leather. It was ordinary wear and tear from the strain on the drive belt. I never saw the lacing machine in operation because the guy at machine shop counter took the old belt back into the rear area and returned about five minutes later with it all fixed up with new laces. They would trim a minimal amount off the old end, then re-lace each end. The belts were expensive but the re-lacing was not.
The belt-drive system on our old Miehle Vertical printing presses had three rollers - one on the electric motor, a take-up roller, and the driven roller which actually moved the various parts of the printing press. A lever was attached to the take-up roller, and together they worked as a clutch, with the belt providing the friction, as the lever slowly swung the take-up roller, which tightened the drive belt, bringing the belt tight enough between the motor drive and the driven roller to run the machine. The system allowed for over-length belts, so we could get at least a year out of a single belt before the end trimming made it too short to fit over the drive shafts. I was trained never to slam the drive, just ease it up to speed, so as to not put too much strain on the lacings at start-up.
They used some sort of dried rawhide insert to hold the laced ends together, instead of the wire you used. The belts drove our two Miehle Vertical letterpress printing presses, very durable old machines. one really old one probably from the 30s, the other made in the early 50s. Another machine we had was an old diagonal tape Davidson brand offset printing press - the same type that about twenty years ago I photographed in the printshop of the battleship USS Alabama, launched in February of 1942.
Even older small presses we had at various times tha used leather or composition belts were the Chandler and Price or Kluge or similar 10x15" to 12x18" platen printing presses, which printed up to about 11x17" sheets. They had a big on-off lever connecting the drive belt to the flywheel, plus a foot brake on the flywheel to stop faster once the drive lever was thrown off
Those laced drive belts, and the tools to replace the laces, were very important to all sorts of machinery for many decades prior to more modern machinery drives. Everyone has probably seen photos of the old factories with overhead drive shafts, and belts dropped to power various machines on the floor below. Though I don't know for sure, it seems they might have used laced belts, too - it appears those staples could have been installed with a hammer or heavy pliers, though not as perfectly as that tool.
They're still used in round baling machines (see ChuckE2009) and I presume conveyor belts in all sorts of agricultural gear are still laced the same way.
I was using a nigh identical machine to repair conveyor belts at a cannery in the 1980's.
There are probably thousands of these still in use, as it's not like they really wear out.
Ammo Alamo Fort Worth, eh? My grandfather was a Pressman at the Star-Telegram.
@Ammo Alamo
I am curious at what company you had these repaired at. I work for Texas Rubber Supply was it there?
Back in the late 80's the Mckinney cotton mill had these antique machines that ran on these leather belts. We went in there and
reworked them prepping for a movie.
I worked for United Heat Treating on Montgomery Street in Fort Worth We stress relieved the welded roller assemblies for
printing presses for several companies. The Conover Company was one. We heat treated other press parts, too.
The original United Heat Treating building and equipment was straight out of the 1920s and 1930s. Old and antique
equipment was rebuilt all the time.
The old time machine operators used their hands to flip the belt from one pulley to the other (to change machine speeds,
like on a lathe) and if one of the metal lacings had broken, it usually made a nasty cut.
The metal laces were a good invention. Earlier lacings were leather.
It is a small world.
I love that feeling when a stuck fastener breaks loose undamaged.
I wish more than anything that my granddad; lifelong tinkerer, auto mechanic-the Ford Model T had just turned four when he showed up-and self-taught machinist, was still around to have enjoyed this site.
I swear, he would've got biggest a kick out of seeing these tools, many of which he was undoubtedly familiar with as a boy, being restored to virtually pristine condition.
Loved it. No BS Talking just show the work a few written explanations and a perfect video!
HEY HES BACK! Back again, hand tools back tell a friend 🎶
Hahaha
If I might make a suggestion. Try getting some wintergreen oil. For quite a number of those smaller screws (and even bigger ones), it is thinner and has better penetration characteristics than many penetrating oils. We used this in aviation due to the fact that all you generally have to do is apply it, wait about an hour, viola, screw comes loose. It works very well, it's also used by many gunsmiths with the small parts they work with. I also noticed that it tends to break up the oxides quite a bit and break their hold on things to make removal of parts easier. it does tend to be a bit pricey, but you also don't need a lot it to work. and it saves time getting things unstuck. I also never had to use heat on anything using it either.
This popped up in my recommended feed, and I watched mostly because I had no idea what a belt lacer was. Now I do, thanks!
Dude this guy is great!!
He reminds me of my Dad for some reason..lol sorry if thats insulting i didnt mean it to be trust me.
My father always told me growing up.."Need a tool? Make a tool!" and I took that to heart. Its something i dont see alot of youngens today doing. they think if they dont have a tool they need or whatever they just cant do it...but this guy proves my ole Dads point perfectly.
I have no need for this tool or even restore one, but I was mesmerized throughout the entire video! I wanted...no...I NEEDED to see it brought to life!! 👊🏻
Although I do not have a need for a belt lacer - I do know how they are used due to my years in Machine Shops. If for no other reason I find this video worth my time.
The thing I found even more interesting is the style of the Bench Vice used in this video. I wish I knew what kind of vice it is so I could do some research on it.
David Budd n
@@daisyrose9968 it's a woodworkers pattern vise , i have been looking for a used one for some time. you can get it here www.highlandwoodworking.com/patternmakerswoodworkingvise.aspx
In my humble opinion this was one of your best and I have seen them all.
It sometimes appears to me that the old machinery seems to be over engineered or maybe that's just a sign of quality, oh well.
Great video, look forward to seeing more.
@@unpluglvfree9507- Back in the early 1900's they were still following the golden rule: "do unto others as you would have them do unto you."
For engineering and classic American manufacturing that would be: Build it to be abused the way you will abuse it.
I've had things break for no other reason than using it as it was intended to be used. That's what happens to quality with a throw away economy.
Perhaps your best restoral yet. The little lapses of humor were also great ... one outstanding video. Thanks so much for sharing your talent with us.
Beginning of video: Well, this tool doesn't look that complex.
10 minutes later: Holy shit, this is gonna be a nightmare to put back together.
Hhaaaa
I thought the same thing.
12:45.....
Yes, I restore one I bought at a Mud Sale in Pa. I broke the "spring eye loop" screw for the spring when I put it back together, 'at 27:14 is the screw going back in' BIG MISTAKE the threads are 26 per in. EX.FINE Threads, had to buy the tap & die from China no one else sell it. Did not went to drill and retap it.
Sure- if you're an idiot....
Loved the comment “what sorcery is this” 🤣 ❤️
I loved the TA-DAAH hands when you got that internal spring finally hooked, well done mate, I had a half smirk on my face all through this vid, watching you overcome all the intricacy of the bits and bobs and not loosing your patience... I hope you enjoy the piece or at least see a worthy return for your work, good work.
Thanks for the tip about using a bit of flat stock to align the bit over a dome.
Thank you for preserving history. The work you and your YT colleagues are doing is incredibly important .
I have a belt lacer just like this one that has been used in our family for years. When we raised apples and peaches my grandpa used to use it to lace belts up to 3 ft wide on the fruit grader. I still use it to lace belts for the hay bailer. Enjoyed your video.
I laughed when he just dropped his head on top of the sand blaster.
Seemed odd
Every time
Signature move. Love it.
It’s really hard to see in cheap sandblasting booths the view windows get messed up fast , so it’s the only way to see what you’re doing.
Every time i see him do that it kills me lol
My father worked in the lumber industry as a planerman. He had to sharpen his own blades and repair the belts that drove the planers. He used one of these belt lacers. I remember it well. I used to play with it when he wasn't using it. He wasn't always happy about that!
i really like and respect the fact that he went over the parts that weren't supposed to have paint on them with paint-stripper and a chisel even though nobody would have noticed or seen i absolutely appreciate that kind of integrity and work ethic its that kind of stuff that makes a big difference to me
Half my time is fixing broken things, and its so nice to see this vid with the hope it gives some folks an idea of the amount of work it takes to do a proper restoration, nice work thar!
Great set up you have for this, tools are our friends :)
Cheers!
What a beautifully manufactured tool. Skillful restoration. Those handles are gorgeous - lovely wood!
Antique? We still use this belt lacer at work! And it works great.this old workmanship will go forever with a little TLC! Great video!
That is so awesome, restoring an old belt lacing machine to working order, and it looks much better, too. It looks like an antique from the past. Great work.
Glad he showed a demonstration, otherwise I'd still not know wtf it was XD
And is that the worlds smallest anvil?
EvilJ069 same 😂 🤣
I had an anvil just like this, in that hole you could fit different parts, one was in the shape of the inside of a shoe so I think it was for shoe repairs. Also I had a tiny anvil about 2 1/2 inches long, more of an ornament.
Actually, I think there's anvils that are even smaller. I think jewelers use them, or did in the past.
@@clydebalcom8252 Yes, absolutley correct! I am a watchmaker and well we, and our friends, the jewellers use such tiny anvils to repivot clocks, set jewels, to punch clock pins, and to loop necklace rings!
I still didn't understand what that does
Intro is on point!
Need one of those shirts!!
I was waiting for the "In the eyes of an angel" song to come on when I seen the whole 10 seconds tool abuse text hahahahah
Early on I suggested he get a baby pool full of evapo-rust. Looks like we’re getting closer to the Dream with every passing day.
Kudos to you guys for finally giving him a drum of your elixir
@Evapo-Rust Why don't you export beyond Canada? The rest of the world wants you.
I want that too.
I'd love to meet the mad geniuses that conceive simple yet complex machines such as these.
You are like the best restoration channel, you are funny and you actually know what you are doing. All the other ones suck, like half of the don’t even know how to spell.
See even in the 20 and 30's there was usually always 1 'hidden screw' behind the label. Even if the Label was made of brass.
They think they're just so sneaky...
Yeh those flapper dress attire and zuit suit ppls think they were so slick...they think they can hide anything in those pants and gin mills and speakeasys from the fuzz... they thought they were so slick ;)
On McBain, Mi there is a tractor dealer that has and uses one of those lacers.
@@larissamonroe21092 LOL, snarky too, the vast majority of them. Sitting around with their Benny Goodman attitudes. . .
Clipper Belt Lacing company now goes by Flexco and is still here in Grand Rapids.
A link to a news article about Clipper / Flexco: blog.mlive.com/grpress/2008/02/clipper_belt_lacing_co_gets_ne.html
@@dlock2k Thanks for posting this link! Great article.
Grand Rapids Michigan if so I'm 20 or so minutes away
I don't use tools or really do anything involving restoration. But I find it so cool to watch these videos. The process is amazing.
I was in the inground swimming pool repair business going back to the early 70's. We fixed everything back then and everything was metal. I had to learn how to break free frozen parts and nuts' bolts and screws, many times in cramped, wet areas and so I love finally watching someone else do it.😀
Glad to see you back!
Thank you! It's nice to be back.
@@HandToolRescue Where have you been ???
@@nicolaiholst building new workshop
@@alecoq8331 is here a upcoming workshop tour :)
It’s good to see that I’m not the only one who uses wood working chisels to do metal work. Another fine restoration!!
This was “THE” video that found me and what got me watching your channel. 😄
Wow! That darn thing fought you well at dismantling, but you showed it!!!
I never mastered that part where you put it back together.
Ha ha that’s funny!
Haha. I was thinking wow that is alot of parts I'm more impressed that he can put it back together.😂
I cheat. I take things apart and lay it out in an exploded fashion and then take a pic of it to remind me that I lay it all out again and work from the center out.
xshanghu ide bet you would find it easy to do if you had a video of yourself taking it apart 😝
Man I’m so glad you are back at it. So many imitators on CZcams using new equipment that they made to look old and in need of refurbishing
Ya but there has been a huge influx of similar channels that are inspired by hand tool that are putting out some great stuff
I'm always impressed with your ability to get those straight slot screws to move without boogering them up.
I love to see old things made new again, thank you very much.
Very faithful reproduction on those handles; nicely done
Thank you! They aren't stained black and lacquered like the originals, but that is because jatoba is too nice to do that to.
the only problem is that they are far to large
Fan from Washington! Love the stuff you do, never quit!
Good job! I’ve used those many times back in my sawmill working days in the 70’s.....you brought me good memories! Thank you, T
I don't know how I stumbled across your channel but you have me hooked. I knew what it was the second I saw it and the one I had to use worked as well as the beginning of the video. I did a little disassemble and clean just to make it work but was a pleasure to watch you go all the way.
Haha that little tool has got more parts than an aeroplane 😂 great job guys like you bringing quality back to life. Here's one for you ! Which clever guy invented it
So mesmerizing watching you work... keep it up!
amazing to watch a craftsman at work. great job.
the world needs people like you. rebuild not trash, and replace is the best way to do it.
if i could do a thumbs up i would give you top billing.
Thank you!
Very interesting gizmo. It is good that you made the handles so different from originals as they are not old ones. This helps people in the future recognize which parts are original and which are new.
This is the quality I subscribed for. Good job mate!
Holy crap that's a big barrel for your evaporust
Everybody is waiting for "Hand Tool Rescue: Swimsuit Edition" now.
It will happen.
Hand Tool Rescue where you gonna find swimsuits for all those tools or is it going to be.... oh hell no
Can I stick my car in there for a little while?
Check him out on Instagram. You could have seen that 2 weeks ago
the machining abilities back then are remarkable. this particular tool would have played a very important part in manufacturing back in the day. no belt no power.saving these pieces of history is admirable. it came out beautiful. the world thanks you.
I used this lacer for years as a millwright. Company still has them.
I have an old tool, it gets abused nearly every day, sometimes even twice on Sundays
NOOOOOO!
good job and your viral even better . lol . seriously its always great to see a piece of history brought back to life . to much of our history is being erased . mad props brother
That was fascinating. I have never seen or even heard of one of these machines. Being a country boy I would have thought there would have been something like this because of the different belts used to drive various farm machines like old balers & threshers. A very clever and interesting restoration carried out with your usual skills. Thank you !
Felt good to know how the mechanical engineering was the leader with these 100% pure mechanical concepts.
Good work and keep it up.
Use dental picks to clean out screw heads. They're useful for many, many things like breaking up crud in creases so penetrating oil can soak in more easily, or finding cracks in metal. Look into it, they aren't expensive...I use them on nearly every project. The little mirrors are useful too.
Edit: dental tools in general are just super useful.
Also, gun cleaning picks. Exact same form factor as dental picks, but they're plastic (nylon, I believe) and work great with softer metals.
They're handy for dentists too. 😃
Are they good for scratching your nuts?..... I'm just asking for mmmm.. A friend! 🤔
I use mine for mineral identification. They are usually ~5.5 Moh's Hardness and great for small grains in a rock sample. Not just for teeth. I also confused the heck out of my dentist when I asked if he had an old one. After my story, he was happy to help.
Just ask your dentist for one. Mine pulled out a tub full of used ones. They don't use them very long before they are discarded. I selected about half a dozen. Very handy.
That this is crazy cool!
I don't think I would ever have a use or it, but it sure is awesome! :D
Thanx for a great resto!
That was great!
I would love to see you restore one of those olde tyme lathes!
The more I watch your videos the more amazed I am. Such dexterity with hands and brains.
We have had one of these lacing tools for several decades. It came with a stationary Pioneer dry bean threshing machine. When bean combines came out, flat belts went away. 'Fast forward a couple decades, and large round balers became popular, with large flat belts, so the Clipper lacing tool gets used from time to time. I used mine a couple weeks ago to lace a belt for my South Bend lathe.
Thumbs up for the intro
We used larger versions in coal mines for the conveyor belts.
Yeah exactly the same except we used them to load our cement mixer,like you say a lot bigger.
So this was for belts that drive machinery?
I worked in a factory manufacturing conveyor belts for coal mines etc. My task as a laboratory assistant was to constantly check the belts for mainly anti static flash over and being fire proof, then wear and tear, stretch etc. Fasteners had to be very special to prevent any such event. The belts were often used in a u shape to prevent stuff falling off the sides, much more complicated to fasten long belts.
So LOVE the way you always 'address' your media blaster machine - BONK!
imagine trying to buy a tool as well made as this today. They just don't make things as well made as this. Everything is made to throw away today this is a treasure to own from our past. Great work and subscribed
Yeah I know. (Well not technically but I do notice that items and products today are made from flimsy material), my grandpa has tons of old tools and some new ones and the funny part is the new ones always break.
What a wicked cool restoration great work
..the beginning.it's so funny, pretty good Film. One of your best One. Cheers. cu Toni
Toni Turnwald I'm
Hello, ??? What do you mean with I'm ??? Sorry, my English isn't so good, because I came from Bavaria :-)
Thanks. You never disappoint.
Maria José Elyseu you are welcome
Thank you for saving yet another lost and forgotten hand tool from spending the rest of it's life in the gulag!
Wow, a real tool made to last 10 lifetimes with maintenance! They were expensive but you 100% only had to buy one!
It's good to see you back, sir. When is the new shop finished? We demand shop tour videos!
Thank you! I should probably do one.
All the time I was watching this I was saying to myself " he'll never remember how this goes back together".
My Dad worked in the oil fields during WW2. One of his jobs was to repair drive belts. He used a tool similar to this one to repair the belts,but they used some kind of spark proof pins to hook the ends together. Some of the belts were about forty or fifty feet long.
One of your more interesting tools and interesting restorations. Alum and water to dissolve steel; who knew?
I love this CZcams channel! One of my favorites! This channel (and a couple others) have inspired me to make my own channel! Thanks Hand Tool Rescue!
Greenridge Metal Works I’m looking up your channel rite now
Have you seen scoutcrafter’s channel?
@@scottjones5013 No I have not
I will check it out
Just subbed man 🤘🏻
Me: " Oh, can hardly wait to see him lace some belts! "
also Me: " wait, what? "
yeah I didnt realize what kind of belts it laces until the very end either
Can we take a moment to appreciate the total absence of mid-roll ads - and in a 40 minute video! Never mind 10 or 12 which is what many people would try to cram into a video of this length. I could handle a couple ads, but if I click on a video and see it has 10 ad breaks, I usually click off pretty quickly. Thanks for being merciful! Probably a good call for audience retention and watch time too.
This one deserves to be in a pixar movie, perhaps a sequel to Robots! So much personality. It is amazing how often we are faced with faces hidden within the things we buy. Try to nail down so car makers for the face styles they have this year!
1st 45 seconds are PRICELESS!! ROFLMAO Well done sir!!!
#MeTool
Once I saw what that thing did, all I could think of was "the 1890's wants their girdle maker back"!!
I clicked on this honestly thinking it was for industrialised corsetmaking.
Crazy! That’s a sweet piece. Never seen a tool like this before. Thanks for restoring and sharing.
I thoroughly enjoy every video you make. Your storytelling is a delight.
I could actually use one of these to fit a new drive belt on my WWII era southbend lathe.
Genial a introdução , parabéns , aprendo muito com os seus vídeos !!!!!!👍👍👍👍
Jeez! Only by the end of the video I realized what that tool was supposed to be doing. I thought you wouldn't be able to assemble it back! Bravo!
I'm very appreciative that we get to see the work on these even when at an impossible angle for him to work on
Ахренеть! Скоросшиватель для приводных ремней! В 18-19-20 веках применялись для передачи тяговых усилий от общего вала на станки!
the thing at the end "i don't know what that is for" is the pin holder that you attached with chain ^^
No it's not. At 35:13 The clip being screw on is to "Hold the Scissors" that comes with Lacer
I just love old tools. They were beautiful as well as functional. You have revealed the thing as it should be. Great documentation. Thanks.
So cool to actually see another 1 of these. Use 1 at work to primarily replace or repair the drive belt on a vertical bandsaw