Fire!!! 16s Black Horse Viper XL 9kW 180A 8Ah EDF 100mm WeMoTec Midi EVO motor HET700-83-1080kv
Vložit
- čas přidán 25. 07. 2024
- Setup after fire 6s:
Black Horse Viper XL 1,9m ca 6,2kg takeoff weight.
100mm EDF WeMoTec Midi Evo (needs better ballancing :)
www.turbines-rc.com/en/wemote...
motor HET Typhoon 700-68-2250kv with heat sink
www.turbines-rc.com/en/39mm-b...
batteries Li-ion Samsung 40T 21700, 6s 8000mAh, total battery weight 940g.
eu.nkon.nl/samsung-inr21700-4...
max power 140 Amps, 2.5kW
Top speed GPS 180km/h
Transmitter FrSky Horus X10 Express
Receiver FrSky Archer SR6 with stabilisation and full telemetry (amps, mAh, volts, temp, km/h)
ESC Maytech Falcon 160-185A 6s
www.bighobby.cz/regulator-may...
BEC Sunrise Model 20Amp 12s
Landing gear retracts JP Hobby ER-005 (180g. total)
www.turbines-rc.com/en/retrac...
Servos 13g 3,5kg TowerPro MG92B
open duct air intake,
Center of gravity at 205mm
Setup before fire 16s:
ca 8kg takeoff weight.
100mm EDF WeMoTec Midi Evo super jet sound !!!
www.turbines-rc.com/en/wemote...
motor HET Typhoon 700-83-1080kv with heat sink
www.turbines-rc.com/en/39mm-b...
batteries Li-ion Samsung 40T 21700, 16s 8000mAh, total battery weight 2180g.
eu.nkon.nl/samsung-inr21700-4...
max power 180 Amps, 9kW
Top speed GPS 270km/h
Transmitter FrSky Horus X10 Express
Receiver FrSky Archer SR6 with stabilisation and full telemetry (amps, mAh, volts, temp, km/h)
ESC ZTW Mantis 150A HV 12s (16s capable) www.turbines-rc.com/en/50a-an...
BEC ZTW 12Amp 14s
www.turbines-rc.com/en/bec-u-...
Landing gear retracts JP Hobby ER-005 (180g. total)
www.turbines-rc.com/en/retrac...
Servos 13g 3,5kg TowerPro MG92B
open duct air intake,
Center of gravity at 205mm
#namaxa_media
#WojtekBrzozowski
#EDFjetRC - Věda a technologie
I like your approach to this hobby, always trying to find new limits. Happy that it all ended well.
Amazing sound and scale flight! The viper looks so light and easy to flight though. The landing with that turn was cool too. It´s amazing what you can do what those LiIon cells. In parallel and carefully flying like you under 70A or under 35A per cell it still has enough speed and joy :)
Cheers from Arizona USA, I don't even fixed fly wings but watching your jets is great. Love you telemetry voice prompts, I fly fpv quadcopters and would love to have voice information like that.
Thanks :) for it you need to go FrSky and OpenTx
Glad I found your site! I agree 100% with the last comment...I just love what you're doing in this hobby. It so refreshing to not just throw in the biggest, heaviest most expensive high power setups without actually thinking about what's happening with your aircraft. Well done!
The second flight was also awesome! That landing looked so slow by the cameras point of view. But speed was by telemetry still good. As I´m a beginner on EDFs I´ll stay tuned on your channel to learn more :D
Cheers and best regards from a half chilean half german from Bavaria
Francisco
My first EDF that is about to be maidened is a FMS Avanti V1. That´s the way I came to your channel a couple of weeks ago. I have ordered the better 1900KV 70mm EDF from FMS since the original has only about 1,6 kg thrust installed, the plane weighting 1,89kg. And our runway is no of such gentle grass as yours. We have a lot of "kretowiska" mountains xD
Hey Wojtek , that fire was not good , but , you know how far you can go now ;-) its nice to see that this airplane can fly with only 8000mAh ... its nice how it fly's ... keep up this good work Wojtek ...
Excellent video! The Midi Evo 100 sounds so good like a turbine almost. This is the kind of setup I like, as light as possible with lots of thrust. Scale flying is the best!
Love it keep doing what you do, and to hell with what everyone else says. This is a part of the hobby that I enjoy the most pushing the envelope and seeing what you can get out of a drive and out of the plane. Cheers my friend.👍
the sound is incredible
Nice scale flying, greets from Remi, Belgium
Very interesting video, look forward to your next ‘Tech Talk’ video, maybe you can show the 160mm fan being printed!
Maybe buy a fire extinguisher for use at the field.....just in case! Great flying skill too, keep the video’s coming 👍🏻😎
Hi Wojtek, thx for your nice videos. I fly this Jet as well with Jetfan 120 Pro on 12S/7000. Flies super nice 😉. I also fly the smaler Taft Hobby Viper without retracts for hand lounching with 70mm EDF on 6S. Only 2,2Kg weight with over 2,4Kg thrust; flies very nice too! Looking forward to your next videos - thx, Peter
That was awesome the sound is awesome thank you
thats the fun to keep experimenting on the edge
Even the birds liked it
Very cool!
Nice video Wojchiech :-) That fire must have been scary.
To be honest I loved the 14S ("it's perfect") incarnation of the Viper better (that was spectacular) than this one but still amazing that it flies this well on just 2.5 kW. That's just a tiny bit more than a stock Freewing Avanti.
I liket the 14s best too:)
I'd be great to see your telemetry setup and how you get all the info via open TX. Cheers.
besides you are making your own inlet rings (for the fan), do you use thrust tubes? How thick is the material and does it go all the way to the rear or comes little short?
Have you ever tried Vapcell 21700 30A ? It's hard to get Samsung 40T here. I normally use 18650 for my plane after watching you, I'd like to try 21700.
Would it fly on a 4s lipo? Something like a Gens Ace 6750mah 4s weighs only 615g. You could push the take off weight down below 6kg.
That would be amazing, a huge model flying on 4s
looks so locked in even at slow pass
ciao che tipo di batterie sono quelle che stai usando sul viper?
I'd love to have one of your setups for my foamy 70mm Rebel on 4 s.... lacking room for battery lipo and flight time 4 mins.
Help lol
you need to experiment
Nice and realistic flight. Do you still use XT60 leads (14 AWG) on your Li Ion packs ?
always 12awg & xt60
I want this plane but can’t find it anywhere? Does anyone have a link
Yes I would love a smaller jet 🛩 like a second jet I’m just learning on the smaller ones like pfoam rebel getting pretty good Maybe you can recommend something for my budget loving the Hobby having a lot of fun for an older guy hey there’s a lot to learn though 👍❤️✌️🇺🇸
did you think about Freewing Avanti?
@@EDFjetRC I got the rebel awesome looking smaller version if I could fly that maybe I think about if I become better like you 👍
Great video and very nice jet. If this runs on 6s does that mean you can use a single lipo 6s battery or would it be too heavy. Also running it on this setup can you use a 6 channel transmitter
6s 5000 will be ok and 6 chanel transmiter will be ok too.
Thanks again for sharing this information. You have already flown for a while with those LiIons, what’s your “long” experience with them pushing 2x the rated current? Is the internal resistance going up? Do you feel like they are weakening?
To this day I only fly a quadcopter on those Samsung’s 4S 4000mAh but pulling only about 20A. My EDF stuff still on Lipos.
I dont think he is using 75A drainrate per cell. its 75 per pack, which is 3s (2 of them made the 6s setup), if i am not mistaking. so each "Cell" is giving more like 25A.
Each cell loading is sometimes up to 100A. But normaly I try not to exceed 60A from a single cell. So 6s battery gives me under max load 17,4V 100A= 1740W. But my tipical aplication is 18V 60A= 1080W
After 1 year of flying and hundreds of flights sitll holding strong. I think lifespan is probably more then 5x the LIPo
@@EDFjetRC Good to hear. I'm moving from a flat to a house next month, to date I've donde only 3 pack and my biggest concern is fire while making de packs.
Finally I can build those cells in a garden not worrying about burning my house. I've a big respect for this kind of DIY application but surely i will try more "flying objects" than my quad soon and hopefully also my 8S FlexJet Pro :-)
@@hectorlmges Well mybad, I made a mistake in the setup of the packs in my head. Thanks for explaining @EDF jet RC
One question Wojtek, what thrust tubes do you use?
0.5mm transparent plastic, pcv, I think :)
PLEASE WOULD APPRECIATE VERY MUCH YOU TELL ME WHAT LANDING GEAR YOU INSTALLED AND WHAT SERVOS
THANK YOU VERY MUCH IN ADVANCE AND CONGRATS!!
Sure :) read the details under video
Which sensors do you use for amps, mAh, volts, temp, km/h
all FrSky smartport sensors
@@EDFjetRC Please tell me which ones
The point of the hobby is exactly trying things until you perfect it. Atleast I think its a view on the hobby some people share like you and I. Good video! Concerning the "extra" items you have on what email can I contact you? Thanks!
wojtek at namaxa . com
Hi i m RC flyer i want to print some parts witch you have like edf ,battery holder,and landing gears can you plz shear with me
already i,v sent you E mail