Amazing video! Always extremely informative, helpful, and builds our confidence to DIY. I spoke to the owner of a local custom lighting shop, who used to do retros (oven/un-seal/halo/demon eye/seq/etc/butyl re-seal). He said they gave it up cause they were ruining some lights in the oven, from off-gassing. Have you heard/seen of this? Is it something to be concerned about? Does it have to do with the sealant the manufacturer uses? I have a Hyundai Veloster N. Thanks bro.
Greetings to everyone! I would like to see a video on how to clean the inside of the headlight lens! I love the content of your channel, I've been a mechanic in the military and civilian sector! I am learning a lot by the professional way you present and explain your trade! Have a wonderfully blessed day!
Great content! This is the first video of yours that I've watched. What if you wanted to make your drls look like a solid light bar like you see on some newer cars?
SMASHED THE LIIKE & SUBSCRIBED! first time watching a video of yours! Your vlogging skills are top notch. Tons of useful information and your way of explaining things is very relatable. Thanks for the video!
I enjoy your videos! I'm a mechanic and body guy by trade. Bc of your videos I tackled my first projector retrofit and sequential turn signal for my navigator headlights since the aftermarket suck for those suv's. I appreciate all the great tips!
Great content. Did my first retrofit a few years ago on my JDM Soarer and now wanna go a bit further with my G35. Where do you find your custom led parts from? Is there an online store I can look?
SUPER HELPFUL VIDEOS @FlyRyde !! How many minutes do you need to put the light back in the oven for the resealing portion ? The same 7 minutes? Also, I noticed you used clamps to help push the lens back into the housing; but you only needed them briefly--is it just safer than pushing it back together by hand? Also, where do you get your clamps from? Your attention to detail is why I subscribed :-)
Can you do a video on a 2015 Buick Enclave? I cant stand the chrome accents and all that so I'm trying to paint the headlights black. I'm also trying to do the taillights but dont know if I should paint them or tint them I have no idea but would like your advice on how to do the headlights mainly
Can you do a video or just a summary of how to open lights that use the permanent seal like the sprinter. That stuff just remains pretty much hard even if you put it in the oven. What do you use on those? Any advice would be just amazing. I butchered my sprinter headlights and when I get the new ones I don't want to mess them up again. On a sprinter they're a pain in the ass. One installer I met in Arizona said he won't mess with that car and if he does it's 500 bucks just to open the headlights.
I had custom headlights made a year ago. They must up. I while back I brought them inside to dry out overnight and added more sealant around the whole edge to try help but still must up but still must up. Any suggestions? I did think to put in a cardboard box with hair dryer for a while to try fully dry them. But not sure how long is safe to leave them like that?
hey great video. i want to see if something would work the next time you take one apart and in has finger prints try using a ceramic paint cleaning/protection spray i use it on the black chrome on my car and it takes everthing away
Great video man , I need some help .. so the black plastic that is right under the lens is bubbling up like the paint .. I never opened them but want to fix them .. how would I get rid of the bubbling paint .. so if u look at the lens then go down there black plastic . That part
I don't know if anyone asked if you'd make a video showing us how to fix lens hazing from the inside, but I would be interested in seeing how you would go about doing that.
Have you ever worked on a 2011 mazda 3 with hid...turns with the steering wheel..no dtr...I want to do my lights but don't know where to get parts or to begin
Hi in one of your videos you said preheat your oven 200c. and that was electric cooker you had mate. I only have a gas cooker could you please tell me what gas mark i should have it on please. And for how long do i leave it in for. Could you please let me know thank you.
yes...please make a video of how to clean the inside of a lens..my BMW has a while cloud and they are the xeon type...expensive. I wonder if they can be cleaned from the inside...THANKYOU 😃
Brooo please make a video about customizing the 350Z headlights 😭 just like with the LED strip and demon eyes. Trying to have an idea and I don’t wanna mess them up 🙏🏼
need some help with seal my headlights from moisture, recently replaced with halo round lights comes with angel ring, noticed some moisture got to it, whats your recommendations Please, Thanks mate .
Trucks are soooo much more work to open. I tend to advise people to spare themselves the learning curve, and just cut. Check out Jack: czcams.com/video/yphujhMi6NY/video.html
I have a question because I’m looking into doing mine soon. Don’t know if you are active in these comments or not still. But would love to ask you. Thanx bro
Well, one year later i hope i get a reply, o have some bolts inside my headlight that can not be removed, can i heat up the headlight with them on, or not?
You mentioned not to put a BMW headlight in the oven unless it's old. How old does the BMW need to be to be safe to put the headlight in the oven? I have a 2010 750 that I want to put LED angel eyes in and black it out.
yes please make a video on how to clean the inside of the lens
You got it bro 👌
I been asking that since last year 🤣
@@flyryde hey bro
Yes, please, please, please!
It's
Amazing video! Always extremely informative, helpful, and builds our confidence to DIY. I spoke to the owner of a local custom lighting shop, who used to do retros (oven/un-seal/halo/demon eye/seq/etc/butyl re-seal). He said they gave it up cause they were ruining some lights in the oven, from off-gassing. Have you heard/seen of this? Is it something to be concerned about? Does it have to do with the sealant the manufacturer uses? I have a Hyundai Veloster N. Thanks bro.
Greetings to everyone!
I would like to see a video on how to clean the inside of the headlight lens!
I love the content of your channel, I've been a mechanic in the military and civilian sector!
I am learning a lot by the professional way you present and explain your trade!
Have a wonderfully blessed day!
Great content! This is the first video of yours that I've watched. What if you wanted to make your drls look like a solid light bar like you see on some newer cars?
SMASHED THE LIIKE & SUBSCRIBED! first time watching a video of yours! Your vlogging skills are top notch. Tons of useful information and your way of explaining things is very relatable. Thanks for the video!
I enjoy your videos! I'm a mechanic and body guy by trade. Bc of your videos I tackled my first projector retrofit and sequential turn signal for my navigator headlights since the aftermarket suck for those suv's. I appreciate all the great tips!
Makes me happy to hear that bro 🙌 way to go!
How'd they turn out
Great video man really appreciate it from a diy guy. Informative, and great details.
Just watched the old video 2 years ago of how to and your video editing and quality is a lot better
Always appreciate these videos. Thanks bud.
Happy to hear 🙏
Thanks for the pro tips! I was wonder what drill you use and how you set up in a home oven. Thanks again. Big fan of your channel.
That was the Milwaukee M12 Impact driver 👍
Awesome video! Did you ever make a video on how to clean the inside of the lense if it’s been touched or if it’s had moisture inside??
Great content. Did my first retrofit a few years ago on my JDM Soarer and now wanna go a bit further with my G35. Where do you find your custom led parts from? Is there an online store I can look?
I have always wanted to make my headlights look great like these. Thanks a lot.
Good video. Need to do this soon on my 15 mustang lights. Changing the led boards and upgrading the lights. After watching this I think i can...lol
Great video, best on CZcams!
SUPER HELPFUL VIDEOS @FlyRyde !! How many minutes do you need to put the light back in the oven for the resealing portion ? The same 7 minutes? Also, I noticed you used clamps to help push the lens back into the housing; but you only needed them briefly--is it just safer than pushing it back together by hand? Also, where do you get your clamps from? Your attention to detail is why I subscribed :-)
FINALLY someone doing it nice and right!! Thank you so much for this video!
Wow so neatly done. Thanks!
Did you ever make a video over cleaning the inside lens? I have to do that to a pair of lights i picked.
Thanks!
Where did you get the honey comb lense? Thank you so much for the info
This is great for what I need. Changing the mirror from a LHD broken headlight to a RHD undamaged headlight.
Great job my friend, I wish you success
The best tuto on CZcams, honestly 👌
Yes make a video on cleaning the inside of the lens Awesome work by the way !!
Thanks Clinton! Ok bro, I’ll do that 👌
amazing, I love this video. I feel a lot more confident in doing this now
That’s dope to hear that! What car will you do?
@@flyryde just trying to reseal my spec-d retrofitted with the morimoto M-led projector for my 07 is250. Love your content
Looking to tackle a set of demon eyes for the 1st time on my 2014 mercedes cla45. Would you recommend removing the Headlight ballast when baking?
Flyryde you got to make that video mane
Can you do a video on a 2015 Buick Enclave? I cant stand the chrome accents and all that so I'm trying to paint the headlights black. I'm also trying to do the taillights but dont know if I should paint them or tint them I have no idea but would like your advice on how to do the headlights mainly
Have you done a video on taking apart a headlight with permaseal?
Please make a video on how to clean the inside of the lens! Thank you for the great info
Love the the video, very helpful..i got a question...when baking Do i have to remove the ballast??
There was never a reply 🤦🏼♂️🔥
Super super great helpful video !
D2s bulb what's the best brightest led or hid I wasnt happy with last LEDs I got I really liked my old 8k hids what would u recommend?
Quality content brother happy diwali from India
Can you do a video or just a summary of how to open lights that use the permanent seal like the sprinter. That stuff just remains pretty much hard even if you put it in the oven. What do you use on those? Any advice would be just amazing. I butchered my sprinter headlights and when I get the new ones I don't want to mess them up again. On a sprinter they're a pain in the ass. One installer I met in Arizona said he won't mess with that car and if he does it's 500 bucks just to open the headlights.
What do u recommend for spyder headlights they seem to have a different type of seal
I was reading through your parts list, what exactly would you be using that 4 channel remote for? 🤔🤔
Awesome video bro 🔥 thanx
Can you please tell me the correct size of the ring that I have to buy to modify my lights it's a 350z as well
I had custom headlights made a year ago. They must up. I while back I brought them inside to dry out overnight and added more sealant around the whole edge to try help but still must up but still must up. Any suggestions? I did think to put in a cardboard box with hair dryer for a while to try fully dry them. But not sure how long is safe to leave them like that?
How about a video on what your design would be for a 2019 Tundra TRD Pro 😇😇🤔
Would be very helpful 😎😎
hey great video. i want to see if something would work the next time you take one apart and in has finger prints try using a ceramic paint cleaning/protection spray i use it on the black chrome on my car and it takes everthing away
Hello, ilike your videos,Question: can you fic after market lights DRL and side marker?/
How would you tell if you have a light with permaseal vs butyl?
Great video man , I need some help .. so the black plastic that is right under the lens is bubbling up like the paint .. I never opened them but want to fix them .. how would I get rid of the bubbling paint .. so if u look at the lens then go down there black plastic . That part
I don't know if anyone asked if you'd make a video showing us how to fix lens hazing from the inside, but I would be interested in seeing how you would go about doing that.
Wow! I'd say your designs are better than the one you bought. But the brightness is better on that one as well
So can you change the projector and can you do a anything in the turn signal on the 350z
is there any way you can show my how to take apart an MK7 GTI lighting package headlight?
Have you ever worked on a 2011 mazda 3 with hid...turns with the steering wheel..no dtr...I want to do my lights but don't know where to get parts or to begin
Yes! Please show us how to clean the inside of the lens
Hi in one of your videos you said preheat your oven 200c. and that was electric cooker you had mate. I only have a gas cooker could you please tell me what gas mark i should have it on please. And for how long do i leave it in for. Could you please let me know thank you.
Like your content, how to clean inside of the lights?
First time i watched your video. Awesome and very informative. Just one question. How long do you leave them in the oven for?
I was thinking the same 😂
Great video bro
I want to ask what effect does static electricity have on the light bulb, thanks
Dope video 👌. Can I send you my headlights of my 2014 Mercedes e350 so they can look like that 🔥
Is it the same process to do truck headlights. Like a 2015 ram 2500
Did you open Audi A3 8P(2009-2013) bixenon headlights?
Thank you very much. From vietnam
Ditto. I would very much like to see what to do if several different types of material gets on the lens.
I have a 2017 nissan altima, how would I be able to see what size angel ring I would need? I’ve looked up countless videos and not one can tell me
yes...please make a video of how to clean the inside of a lens..my BMW has a while cloud and they are the xeon type...expensive. I wonder if they can be cleaned from the inside...THANKYOU
😃
Brooo please make a video about customizing the 350Z headlights 😭 just like with the LED strip and demon eyes. Trying to have an idea and I don’t wanna mess them up 🙏🏼
Great got to get my lights done
Yeah, please make That Video!
Hey bro did you work on Bmw e90 lights
sir can you make a toyota yaris 2012 hatchback headlights? left hand wheel
I have an 2018 Kia stinger I’m im trying to put in my rgb headlight kit how do I find out if I have led in my headlights?
Nice work 👍
Nice but how much do you charge to customize Mercedes Benz Cla 250 headlights?
Any chance you have done a chrysler crossfire headlight before
I would like to see you do a vid on cleaning the lens
Do you do light for other people?
Would you be able to make a custom headlight and taillight for 2005 bonneville gxp no one makes em and the car is a true sleeper
What should you do if a little dust gets on the glossy sections?
need some help with seal my headlights from moisture, recently replaced with halo round lights comes with angel ring, noticed some moisture got to it, whats your recommendations Please, Thanks mate .
Make sure you use retro rubber to reseal, and check all your caps. Also add a pack of silica if you need to.
What about opening up 2018 silverado 1500 headlights? Any tips on those?
Trucks are soooo much more work to open. I tend to advise people to spare themselves the learning curve, and just cut. Check out Jack: czcams.com/video/yphujhMi6NY/video.html
Puddle of headlight😂 , you are an artist, amazing work. I highly appreciate your work/art.
I just bought a M12 drill too!! 👏🏻 glad I chose the right one 😁
I have a question because I’m looking into doing mine soon. Don’t know if you are active in these comments or not still. But would love to ask you. Thanx bro
Well, one year later i hope i get a reply, o have some bolts inside my headlight that can not be removed, can i heat up the headlight with them on, or not?
Are all lights sealed with butyl? Mine looked like it was sealed with something clear like silicone. Does this method work for that?
What if I used caulk to reseal the headlights instead of automotive grade sealant?
Worth subscribing 😎😎😎😎
Where do you get these honeycomb stuff and other stuff to customize?
Excellent
You mentioned not to put a BMW headlight in the oven unless it's old. How old does the BMW need to be to be safe to put the headlight in the oven? I have a 2010 750 that I want to put LED angel eyes in and black it out.
What kind of gloves inside those blue ones friend?
Great video! but man you could invest in a larger pad for your desk. ;-) But thanks for the awesome video; you really have figured this out!
Hey, can you please do a video how to repair the damage caused by prying with screwdrivers 😒
Hello bro can you provide us some links where we can actually buy those RGBW strip and RGBW bulbs please?
A great place to shop is Lightwerkz.net
I domt want to modify my headlights. I want to change the clear lens. How long will it take to do that?
Can you still fix the microcracks on the lens that has been sun damaged?
Should I spray clear coat on lens so they can’t last long ? And yes which brand will you recommend
So i got a Jetta GLI MK6. The oven at 220 for 7mins and using my man hands to pry the lights while there still hot is all I need?
Can you do taillights that way too ?
I have been looking to buy/customize some new lights for my Nissan Xterra... After watching this I think it might be better to hire you to do the job.
Where can I buy the actual led angle eyes?
How much do you charge to black out the housing if I wanted you to do it?