1966 Mustang | Replace the Existing Glass Fuse Block w/Blade Style Fuse Block
Vložit
- čas přidán 29. 10. 2022
- How to replace the existing glass fuse block with a blade style fuse block in a 1966 Ford Mustang.
//PARTS:
○ Blue Sea Systems ST Blade ATO/ATC Fuse Block: amzn.to/3SNNO3V
○ Blue Sea Systems 9217 Terminal Block Jumper: amzn.to/3U51U1D
○ Ring Terminals #10 Blue 16-14 AWG: amzn.to/3FxZT8D
○ Tesa Tape: amzn.to/3Vurrln
//MUSTANG MUST HAVE ACCESSORIES:
○ NOCO GENIUS2 Trickle Charger: amzn.to/3ERu2RM
○ Fluke 115 Digital Multimeter: amzn.to/3gt9e8R
○ Brady M210 Portable Label Printer: amzn.to/3MXzDrC
//MY CAMERA SETUP:
○ Sony A7SIII: amzn.to/3JytF0n
○ Sony FE 16-35mm F2.8 GM: amzn.to/3Lhou69
○ DJI Wireless Lavalier Microphone: amzn.to/3YEickc
#fyp #restomod #mustang
This video is not sponsored.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission. There is no additional charge to you! Thank you for supporting our channel so we can continue to provide you with free content each week!
0014 - Auta a dopravní prostředky
Great job. I used your video to complete the fuse block replacement today. You are very thorough and organized, BRAVO!
Appreciate it. Glad it helped.
Well done. At the very end I'd just show that everything still works :D
Hey there, I did this, on my 65 coupe, several years ago. I used two, Bussman brand 6 circuit fuse blocks, as I had a whole bunch of additional inline fused items, I wanted to tidy up in the upgrade.. The independent circuit power in/load out block is awesome 😎!!! I wound up still having that independently powered dash light 2.5 amp as separate inline fused afterwards. Your job just nails this upgrade perfectly.. And, is easily expandable to anybody's Ford, with this setup.. I added wire length, and fabbed a metal plate to mount them on, and the signal flasher, as well as a electronic fuel pump relay, (that's tach signal triggered). It slides up behind the fresh air box, sits on a homemade bracket. So it's easily removable, with just enough wire have decent access, while kneeling down in the footwell. Kudos brother, for a really well engineered solution here !!!! God bless...
appreciate it
AWESOME UPDATE, GOOD JOB ON MAKING IT EASY. MY 65 HAS AN OLD BLOCK, HARD TO CLEAN TERMINALS. THANKS.
Thanks so much for taking the time to show this FYI upgrade, I've been wanting to do this to my 69 Mustang forever.
Great post and gave me an idea I was not even thinking about until I saw your post. I used your links you provided. Thanks again.
Thanks for posting this, really interesting and helpful. Will be doing similar with mine
Wow this is fantastic! this is on my to do list for my 66
Super easy to do and works great.
Just did this as well. Great tutorial.
Great video and clarity of instructions.
Thank you!
Great posting Michael! I have a 66 F100 that I have been needing to do this to (glass fuse panel is kaput) - you got this done in less than 30 min - with explaining everything... I should be able to knock mine out in 15 min!! LOL! great explanations and suggestions!
15 min is definitely doable...its super easy. Just be sure to label the wires before cutting.
I did the same thing but I extended the fuse box to the glove box you did a nice job thanks for your video
Excellent tutorial!
Thank you!
Love your methods.
Appreciate it.
Awesome work , I need to do this to my 1970 mustang
Appreciate it.
thanks for the vid, I am doing this to my 67 and keep coming back to this vid to make sure everything is right. I am also adding 2 ignition and battery fuse blocks on other side of tranny tunnel under dash to run stuff like electric antenna and gauge lights and tach light etc etc I subbed and liked.
Appreciate it. I added 2 fuse blocks as well and put them in the trunk. Check out my Big 3 upgrade video that showed this. czcams.com/video/WgSs0gAcPzo/video.html
Used this on my 1980 Triumph Spitfire. Easy there because the fuse panel was already by the firewall and easily accessible.
exelente video
Good job!
Appreciate it.
Awesome video, could you share PDF of spreadsheet?
Of course. Send me an email and I'll reply back with it.
Where do u hook up ur positive and negative wire ? I have a 1970 mustang
Great video!!! Any chance you could share the spreadsheet you used for planning everything out? Or maybe an image?
send me an email and i will respond back with a pdf.
Great video! Thanks for taking the time to share. Can I get a copy of that spreadsheet?
Just emailed it to you.
Well done. I've been looking for a vid like this. I want to do this to my 67 Mustang. I believe wiring and fuse box are identical but in different places. Everything working?
Appreciate it. Everything works great. I'll say that labeling the wires before cutting made this project super easy.
Did you mention putting the terminal jumpers on the fuse box in the video? The ones listed in description
Yes I jumped the bottom 3 fuses on the left side.
@@michaelanthonyaquino thanks for fast reply! Gonna be using your video to do my 66 coupe this week, cheers and thanks for the detailed and informative video
Hi, I bought the m8 5/16 connectors but it didnt fit the fuse box. I’ll order some m6 1/4 . Hopefully it will work
I am pretty sure I used #10's...not sure why it was linked to 5/16.
Great video. I'd like to do this to my '75 f100. I see the same fuse blocks have diagrams for attaching battery "pos" to top and "neg" to bottom. I'm guessing that's for boats etc? no need to do that with the Constant power to top fuse? as per ford wiring diagram?
Thats a different type of fuse block if you want a hot coming in and several fused circuits going out (I did this with two blocks in my trunk). The fuse block in this video is for independent circuits...hots coming in on the left, a fuse, then hot back out on the right.
@@michaelanthonyaquino Thanks! I see the one you used is unavailable.
Amazon has it...amzn.to/3mpRezH
Any idea if this would work for an inline six, Im assuming it’s pretty much the same wiring
Yes
Do you know if the wires/colors are the same on a 69 Mustang? Would like a copy of the spreadsheet if possible.
not sure if the wire colors are the same. send me an email for the spreadsheet.
Hello Michael! I have a 67 Mustang, can your unit apply to my 67? I upgraded my Altenator to 110 amp single wire Last year and would like more options to add things to fuse box. Looks about the same as my old one in there. Thanks for any input. Thanks for sharing this Gem of a video!! Cheers from Motown/Dearborn.
Yes it should be fine...though I would run a separate distribution and fuse box if you plan to add additional accessories. Watch the Big 3 Upgrade video I have which talks about this.
@@michaelanthonyaquino Thank you very much Michael. Wont be adding anymore. I have my fans on relays, along with my Gt fog lights on relays, no issues with new 110 amp 1 wire Ford Alt. I just dont trust that old fuse box and only possibly need an extra 12 volt Ign source. Appreciate it brother!
Need the shrink tube label maker
Someone makes a shrink tube label maker!?
Hello could you send me the copy of the wiring diagram you use
Sure just send me an email and I'll reply back with it.
Link for the fuseblock please?
amzn.to/3SNNO3V
Hello good job can I get a copy of the diagram?
send me an email.
Great video! Can I receive a copy of your diagram??
Sure...send me an email.
@@michaelanthonyaquinowhat is your email?