How To Make A Drawstring Macrame Water Bottle Holder w/ Added Base Protection Design No.4
Vložit
- čas přidán 9. 07. 2024
- This is a variation of the Macrame Water Bottle Holder Design No. 3 I made a drawstring type for full coverage of the bottle. It has an adjustable sling strap that is easy and convenient to use so you can hang it loosely or tightly around your body. Hope you like it! Let’s make it together! 💞
Designed by SilentKnot
✨Best fit 500-700ml bottle with a height of 18-24cm and a base diameter of less than or equal to 7cm.
✨IMPT NOTE: Bottle size in the video has a height of 22cm and a base diameter of 7cm.
Related Videos:
How To Make A Macrame Water Bottle Holder with Adjustable Strap Design No.1 bit.ly/37bJf1D
How To Make A Macrame Water Bottle Holder Design No.2 (No Rings) bit.ly/3chFyK3
How To Make A Macrame Water Bottle Holder w/ Added Base Protection Design No.3 bit.ly/3KbycEG
Materials List:
Cotton Rope (braided or twisted)
4mm
-2pcs of 180cm (adjustable strap)
3mm
-12pcs of 150cm
-12pcs of 70cm
Thank you for watching! 💖
Please help me grow my channel by clicking the subscribe button. I would love to keep creating tutorials for y'all.🥰
If you want to see more of my work or have questions about the video, please visit my Instagram account / . .
or comment down below,
I'd be happy to hear from you! 🤗
#macrame #macramewaterbottleholder #macramebottleholder #macramesg #macrameph #macrametutorial #silentknot
0:00 Introduction
0:28 First, take 2pcs of 180cm 4mm cotton rope.
1:32 Pull both ends to tighten.
1:49 Make a row of square knots.
2:17 Then, make alternating square knots and allow even spacing for every knot with the use of a tape measure.
3:27 Turn onto the side and continue making alternating square knots.
4:07 Next, prepare 12pcs of 70cm cords. Add 2 cords each in between the square knots.
5:14 Fit in the water bottle and knot the cords tightly this time.
7:12 Continue making alternating square knots until you have 7 rows.
12:21 Turn the holder inside out.
15:07 Lastly, we will make adjustable knots for our strap. - Jak na to + styl
Saw this post on Pinterest and here is the tutorial! Thank you so much I really appreciate you sharing your expertise and knowledge!
Thank you! Ive been looking for a bottle holder pattern with a nice finished bottom, and this is just what I wanted!
hiya jamie! saw this design on a pin, and I think its a wonderful project for these hot summer days! thanks so much for sharing the different variations!
this is so beautifully made. My mom has parkinson's . I'm gonna try to make one for my mom. Thank you for the inspiration
Thank you! ❤ Beautiful work. I just finished mine! We are heading to Mexico for spring break/as a babymoon and I didn't want to carry a water bottle around all the time to stay hydrated, but also didn't want to wear a backpack and get hot! So cute!! I added 20% to each measurement to fit my 40oz bottle. I just barely had the length to complete, so i would suggest adding 25%.
Pls keep on watching silent knot...it's an amazing work of art🙏
I love this design so much 😍thank you for teaching me! ❤️ I made one and completely missed the cross knot sealing the bottom so I tried again today and it came out FLAWLESS🤩I'm truly so thankful for this video❤️I'll be making 4 more for my fam and I for our hikes in Hawaii. 😁
this video is amazing! your design is very well thought of. I love it! can't wait to try it myself! thank you so much for sharing this. 🤗❤️
Thanks so much for the clear tutorial. I love it, would like to try this asap ❤
Замечательный мастер-класс ❤Благодарю Вас!Желаю успехов❤
Thank you for sharing this pattern and technique! Can't wait to try. I think it will be great for mini baskets as well! 😊😊
You are so welcome! Thank you so much, hope you have lots of fun!
Mãos de Deus 👏🙏🙌
Maravilha,amei seu trabalho. Muita luz na sua vida ❤🤩😍😘
Thank you for sharing!!! I would love to start a small business one day. I’m stilll learning and I appreciate you making this!
Beautiful, i can't wait to get the materials to get started!
Thank you so much! Hope you have fun! ♡♡♡
Parabéns pela criação dessa peça. Fiz uma pra mim e amei o resultado. Tive que fazer um pouco menor para minha garrafinha mas ficou linda. Obrigada
Super!!!!!🎉
Thank youu so much for the tutorial!
Благодарю за оригинальную идею ❤
Amazing! I really want that.
It’s gorgeous? Can you wash it on a washing machine?
Hermoso gracias
This looks so good! I've never done macramé before but would like to have a go... Am I correct in thinking that this project would use 30m of rope altogether? That just seems like a lot and I want to check that I've not missed something important before i buy the rope 😊
This is awesome... thanks for such detailed video
You're so welcome! ♡♡♡ Thank you!
Thank you!!!❤
Just wonderful.
I'm so glad you think so, thank you! ♡
So good!
Im trying to make it for my bottle that is 31cm in length and 9cm in diameter with a 5cm and 4cm cord sizes.
Any clue on how I can adjust the measurements?
Wonderful and useful... ill try to do it soon
Спасибо, замечательно!
Thank you! ♡ ♡ ♡
Una maravilla!!!
Really appreciate it! 🤗♥️😍
Beautiful work ❤️
My heart is grateful! 🤗♥️ Thank you!
I love the design but am a bit confused by the cord size as you state 4mm is used in the description then 3mm in the beginning of the video. Which should I be using for the main bottle holder as mine seems to be smaller than the measurements you say for the bottle size. Thanks!
Thank you🤗 very beautiful
You are welcome! Thank you very much. ♡
So great 😀 amazing work 👌❤️
Thank you so much dear!❤️🥰💖
Ganda naman, at napakagaling pagkakagawa❤❤❤❤❤
Maraming salamat po! ❤️
Very nice.good job.
I have to learn from your tutorial.
💖🙏
Ya! Thank you so much! Hope you find my tutorial helpful. Cheers!
I love the design but the video is quite fast. Don't think I could follow it. Can it be made as long in length as needed?
Hermoso
Thank you so much. I made one for my son. All the instructions are very clear except towards the end where you make the triangle by opening up some knots. I couldn't do that. I am a beginner at macrame and this was my first project. But the design of the bottle is very friendly- it is drawstring, there is a base, and the length of the strap can be adjusted. Thank you so much.
Hi! Thank you so much for your appreciation. I'm so humbled to know you considered my tutorial to be your first project. I hope it helped you a lot. I opened 3 knots at a time (triangle) in forming the base. I hope you were able to slow it down and follow along. Cheers! ♡
I also am struggling with the base. Mine looks a mess! I can't understand how to finish it. All scratty ends! Shame I got this far and unable to finish it.
Wow very nice 👍👍👍
Thank you so much! ♡
No se entiende nada cdo cierra la bolsa abajo😮
I love the design, however I can’t seem to get the bottom quite right. I’ve attempted and taken it apart 3 times and now my cord is fraying at the end. I don’t think I’m doing the triangle thing correctly, but I just don’t know. 😣
It's so easy! So there should be a total of 12 knots all the way around the bottom line. Take 2 apart on the bottom row and one above them between. Then skip on knot on the bottom and unknot 2 more next to it, then one above those two as done previously. Keep doing that 2 more times and you should have your equal triangles. Hope that helps!
I struggled with it too lol. What helped me was putting a pin at every three knot triangle (leaving one knot between each triangle) to make sure my placement was right before going ahead and unknotting them.
Love this - thanks for sharing!
Glad you enjoyed it! Thank you so much Debbie! 🤗♥️
❤️🥰❤️🥰❤️🥰👍❤️🥰😍♥️😍♥️😍♥️😍♥️😍♥️😍
Very nice ❤️🥰i love 😍i love
Fantástic 😍❤️🥰fantástic
Un fuerte abrazo fraterno desde colombia 🇨🇴
Aww! Your message is the sweetest! Thank you so much! Sending you lots of hugggs too! 🤗♥️😍 Have a beautiful day!
👏👏👏👏❤️❤️❤️❤️
You don't need to glue the square knot ends that you cut for the inside of the bottom part?
Hello Mandy! Thank you for your question. Yes, no need glue. The knots at the bottom are strong enough to withstand the weight of the bottle and its content. :)
Hi, i love watching your videos ❤️
Can i ask, how long do i need the ropes to be when making holder for a 1.2 liters tumbler?
Diameter: 3.8"
Height: 11.2"
Thank you so much! That means a lot to me. ♡♡♡ I suggest adding 20% more on the length of cords provided. Hope this helps. :)
Can you do this all with 3mm string? Or is 4mm absolutely necessary for the strap please?
I did it with all 3 mm and it turned out fine
❤
Hi, I love this pattern and your clear instructions and modelling. I am running a stall for a school charity event and we will be selling all of these materials. I wondered if you would be happy for us to direct people to your You Tube channel for how to make these to give them ideas? All proceeds are for a local wildlife charity.
Thank you so very much! I’m so humbled by your comment. By all means, much love! ❤️
keren bat cok
Would it be OK if I make the whole thing with 4mm rope?
Hi Jessica, thank you for watching! 💖 Absolutely, I just happen to have 4mm and 3mm at the time of making and wanted to use both for this project.
btw, I suggest to add few more cm (20% more) with the measurements provided as you’ll be using a thicker cord for the body.
ப்ளீஸ் இந்த ரோப் நேம்
Ano pong gamit niyan. Cord po ba anong haba din.
hello! i used 3mm braided cotton rope :)
What size is the bottle?
Hello! Melanie, thank you for asking. Bottle size in the video has a height of 22cm and a base diameter of 7cm. This design best fit 500-700ml bottle with a height of 18-24cm and a base diameter of less than or equal to 7cm.
@@SilentKnot If you convert to inches 7cm in 2.75 inches that is way too small. Even a regular plastic store bought water bottle is larger than that. I don't think 7 cm is correct at all
bottom part is impossible
That’s what I thought 😭 this is too hard for me, I need a very low video explaining how to do it 😭😭
I agree. It's very hard to see. I just improvised and made up my own
il faut mettre la vidéo au ralenti peut être et un peu de concentration 😂
Consegui fazer apesar de ter feito menor as carreiras das laterais pra dar certo na minha garrafinha. Não é difícil, coloca numa velocidade menor que você entende a sequência.