How to Install a Horn Switch and Replace Dashboard Cluster Lights on a Ford Ranger

In this video, I'll show you how I wired a new horn button after breaking the connection from my clock spring on my Ford Ranger. I'll also show you how to replace the bulbs in your instrument cluster.
______________________________
PARTS AND TOOLS
Milwaukee M12 3/8 Stubby Impact Wrench: amzn.to/3piWkv1
3/8 Impact Sockets (Need 7 and 8mm): amzn.to/3rqii1W
Wobble Extensions: amzn.to/3I2jo9X
194 LED Bulbs: amzn.to/3pdXmby
These bulbs are cheaper and brighter than the Sylvania Bulbs. I bought the Sylvania bulbs at Advance Auto for $8 PER PAIR. If I had known it was the cluster that was bad, I would have kept the LEDs. I was too lazy to swap them out again. I’ll use the LEDs on another project
Horn Button: amzn.to/3xFWTmm
Low Voltage Wire: amzn.to/3o9OFQo
Solder and Seal Wire Connectors: amzn.to/3o8X3Q5
Heat Shrink Wire Connector: amzn.to/3pxUYgb
Heat Gun: amzn.to/2ZE8upm
Automatic Wire Stripper + Crimper: amzn.to/3G5yw4j
Step Drill Bit: amzn.to/3E6yF78
Milwaukee M12 Drill: amzn.to/3d3VQmT
Center Punch: amzn.to/3Ib8rCQ
Milwaukee Philipps Screwdriver
amzn.to/31TU45n
______________________________
CONNECT WITH ME
Instagram: @rayregno @rayregnogarage
For Business Inquiries ONLY: [e-mail]
______________________________
FTC LEGAL DISCLAIMER
Some links found in the description box of my videos may be affiliate links. This means that when you purchase products or services using these links, I will make a commission on these sales. This is free for you and is one way to support the channel so that I can keep buying more parts and tools and make more videos! Thanks in advance for your support!
______________________________
LIABILITY DISCLAIMER
Please use the information in this video at your own risk. Neither Ray Regno nor Stronghold Garage will be held responsible for any damages, injury, or loss that could arise from using any information in this video.

[@tatewilliams9510]

Love the Ranger content!!!

[@rayregnogarage]

Thanks! Next up is toe adjustment, rock lights, shocks... Maybe a bedside pull, but I don't want to actually do that to my truck right now... lol but I can show everyone what to do

[@Louie.94]

Good thing I came across your channel, just got myself a 95' Ranger as well and your videos have been really helpful ! Can't wait for more videos to come ! I'm also from SD myself and lived in WA for 2 years, missing PNW a lot !

[@rayregnogarage]

Oh man. Can we trade? Lol. I go home to San Diego once a month or so and it’s always so hard going back to WA. lol. I’m over the cold. lol

[@stevehaven3810]

Did u know if u Peel back the green plastic off of the cluster and use a dremel at low speed or hand sand the inside of the plastic film with fine sandpaper until the green is gone and it’s just clear then u can use colored led bulbs and it changes the color of everything. Mine are all red to match the paint. Some remote color changing ones would be sick!! Just a lil secret. Lol this is my 5th ranger 🤷🏻‍♂️

[@rayregnogarage]

totally forgot about that. haha.

[@Lex_below]

What modifications did you do to make the hub fit?
I still have the clock spring intact, how can I connect the horn to the steering wheel?
Thanks in advance. Love the channel.

[@rayregnogarage]

How to Install NRG Short Hub, Quick Release Steering Wheel and Wire with Working Horn Acura Integra
czcams.com/video/qjLf9hKlpWg/video.html
That’s all I had to do. Thanks!!!