Video není dostupné.
Omlouváme se.
Lightburn Print and Cut Tutorial using an OMtech Polar Laser
Vložit
- čas přidán 15. 08. 2024
- In this video, we'll walk you through the process of using Lightburn Print and Cut with your DTF or Sublimation printer and OMTech Polar Laser. We'll cover everything from importing your design to setting up your print and cut parameters, so you can create stunning and accurate results every time. 💥
Whether you're new to using Lightburn Print and Cut or looking to improve your skills, this tutorial is packed with tips and tricks to help you get the most out of your DTF printer and OMTech Polar Laser. So what are you waiting for? Check out the video now and start creating amazing print and cut projects! 🚀
Don't forget to like and share this post with your friends who might find this tutorial helpful. Let's spread the knowledge and creativity! 🤗
Stuff We Used:
Free Red Dot Pointer SVG for Polar Laser: kandgmakeit.co...
Oh!!!! Here is the link to the Laser Pointer I used: amzn.to/3yGqPzW
OMTech Polar Desktop Laser Discount Link: omtechlaser.com?sca_ref=2987683.F5PAdxWPrZ
Coupon Code: KANDGMAKEIT5OFF
www.amazon.com...
Follow us on social:
- Patreon: www.patreon.co...
- Instagram: / kandgmakeit
- Facebook: / kandgmakeit
We love to Do It Ourselves. You love to Do It Yourself. Let's Do It Together. New DIY Videos Every Week!
Visit our website:
- www.kandgmakei...
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
A video on how to do this in XCS would be A W E S O M E!
I love THIS fan art! It's OFF THE CHAIN! And I had no idea we could move the laser head with controls in lightburn 🤯Always learning with you guys ALWAYS - It's why I keep coming back! Also little hands on the violin would have been EPIC. Let's get a tik tok with that 😉😉
Hi kim and garret
First off thank you very much for doing all these very helpful videos!
One thing, I followed your steps for the laser pointer, but when I ended up doing a test cut the back side of the pointer got lasered/burnt. Any idea why? I know i blocked a beam/laser with it so how did you not burn yours
What version of light burn do I need for the polar? I am getting one Saturday. I have lightburn for my diode I am not sure if that will work?
This is awesome guys!
Thanks Karen!
Looks amazing!
Thanks!
This looks really cool. Nice job❤
Thank you! 😄
This is amazing, trying hard to learn how to do this. I have a 100W omtech and I hand paint my items like y’all. Do you have more videos on this process. I only have lightburn and I use HTV and my printer for copies to heat press on wood to duplicate. Great video!! Thanks
What does the red dot pointer do that you made.
I think the Omtech Polar is going to be my next laser.
It is a great little machine! Thanks Wiley C! ~garrett
My Beamo is great, but more power and a bigger bed screams more possibilities. I guess I better start learning lightburn.
Why DTF over sublimation?
I use the Arrange tab… highlight first target… go to arrange tab and select move laser to middle and the laser head will move exactly in the middle of the target
Hey can you tell how do you make red dot laser
How can you make the red dot pointer?
I’m so jealous. ❤️❤️❤️❤️❤️
Dang that’s super cool I love it 😻
Thanks!
At what temperature do you apply the DTF on the wood?
Awesome!!
Thanks!
Hi I am new to your channel and was looking at your links and the link for the laser pointer and its now says works with all models except the polar 350 or did you get it to work
I love this!! Got a question though, what's your favorite laser cutter?
What brand of DTV printer do u have?
Amazing
I love it wish I had a laser so I could make it
Hi, thanks for the video. Your description points to the "Free Red Dot Pointer SVG for Polar Laser", but your website says the price is $4.50. Could you please update either the description or the price on the website? Thanks.
OOOPPPS! I copied the previous item. I fixed it! Thanks! ~garrett
@@KimandGarrettmakeit Thank you very much.
Nice
Thanks, Jessica!
legit!
Wow 🤯. My people have way surpassed my my visions. I want to lazer acrylic. That would be fancy 👰♂️🤵♂️
Wtf, my laser cut like butter like yours
Did you ever think about maybe using black acrylic so you wouldn't need to paint?
DARN IT! Missed opportunity! YAAAAS! Black acrylic!
where can i get the those pictures?
I gave the image and the cut file to our Patrons over on patreon.com/user?u=16643484 OR Email me at support@kandgmakeit.com and I will send it to you. Thanks! ~garrett
@Kim and Garrett make it thanks showed it to wife and she has to have it👨❤️👨
@@KimandGarrettmakeit Been watching email for reply's .
Wish u were selling this....