I really appreciate the content. I have a laser on the way but I have never owned or even used one. Your channel has really helped me with the decision to buy a Thunder.
Congrats on the Thunder you will love it! Thank you for your comments. They are great lasers. If you haven’t subscribe to the global thunder Facebook page. Lots of great people on that page.
give it a try, it looks great ther is some tweaking you might have to do on time and temp.if the paper sticks let it cool before you take the sub paper off.
Wow exactly what I was looking for Awesome Video I have a Laser and just got the sublimation stuff and I'm learning Affinity Designer Great Job looking forward to more videos like this!
Did you do anything to pre-prep your acrylic? Where do you get your UniSub Hardboard and your acrylic? Love your design and the outcome!! I'm going to have to try the acrylic sublimation and check out the Affinity software. Thank you for another great video, I learned alot.
Well done. I commented before that I recently got a laser and am in the learning and absorbing process. Your video was well done, I was wondering about sublimation and you provided me some insights on that - much appreciated. I opened your more section in the description to see if you had affiliate links or other information on products you used. I didn't see anything - would've been nice to see those references. You mentioned you use the unisub hardboard quite a bit - never heard of that yet,. Where do you order - is that a special order thing or have I just never noticed it?
Where do you source your unisub if you don't mind me asking? My last batch and after cutting it the back edges on some pieces were crumbly and not smooth. Definitely wasn't happy after cutting a 24x24 sheet.
You mentioned in another video that your EcoTank ET-15000 was modified to print dye sublimation. What modifications were necessary? I'd like to buy one myself.
Loved the video, it was very helpful and packed with a lot of tips and tricks! All good stuff for sure! I only had one question on your choice of a $2600+ heat press. What was your reasoning for that purchase?
Thank you for watching and the comment. Great question, I learned along time ago buy once cry once. after doing extensive research this company has one of the best reputations and warranty’s. in talking with several other shop owners that have one it came highly recommended. the 16x20 platen with the ability to change out size and preprogram settings is a great time saver! there are allot of cheaper options for sure but dependability and service after the sale is paramount in my business.
I love how you share just you your picture and not a screen share
I appreciate your comments on my video. This is the first time to try that special effect, so glad you like it! Thank for watching
As mentioned here already this was super cool. Totally new thing to me and now a new thing to consider to my workshop!
Thank you for your comment, I really appreciate it.
I really appreciate the content.
I have a laser on the way but I have never owned or even used one. Your channel has really helped me with the decision to buy a Thunder.
Congrats on the Thunder you will love it! Thank you for your comments. They are great lasers. If you haven’t subscribe to the global thunder Facebook page. Lots of great people on that page.
Such a great wealth of information. Keep up the great content!
Hi Mark, thank you very much for the donation to the channel. I really appreciate it.
I did not know you could sub onto clear acrylic! I have an ecotank2720 for sublimation and a 60w co2 laser, I'm now going to have to try this! Thanks!
give it a try, it looks great ther is some tweaking you might have to do on time and temp.if the paper sticks let it cool before you take the sub paper off.
Wow exactly what I was looking for Awesome Video I have a Laser and just got the sublimation stuff and I'm learning Affinity Designer Great Job looking forward to more videos like this!
Glad it was helpful!
Thanks for all your content, your videos help me to make up my mind, I purchase a Thunder 35 100W laser, I am just waiting on delivery.
Good choice! that what I have and love it!
Thanks!
Thank you So much for the donation to the channel. I really appreciate it!
Did you do anything to pre-prep your acrylic? Where do you get your UniSub Hardboard and your acrylic? Love your design and the outcome!! I'm going to have to try the acrylic sublimation and check out the Affinity software. Thank you for another great video, I learned alot.
the Unisub hardboard comes from JPPLUS.com. no prep on the acrylic. lots of options for acrylic. Houston acrylic is a good choice
Great video, but I assume you aren't cutting these on a diode? Also where do you get your unisub hardboard?
you are correct all co2 lasers. had a diode and wat too limited and too slow for the workload I had.
Does the Unisub (spelling?) material give off the same bad smell as acrylic?
Hi James, no not at all, just like cutting any type of wood.
Well done. I commented before that I recently got a laser and am in the learning and absorbing process. Your video was well done, I was wondering about sublimation and you provided me some insights on that - much appreciated. I opened your more section in the description to see if you had affiliate links or other information on products you used. I didn't see anything - would've been nice to see those references. You mentioned you use the unisub hardboard quite a bit - never heard of that yet,. Where do you order - is that a special order thing or have I just never noticed it?
I appreciate your comments
i always use .125mm for the bleed in sublimation
thank you for your input!
Where do you source your unisub if you don't mind me asking? My last batch and after cutting it the back edges on some pieces were crumbly and not smooth. Definitely wasn't happy after cutting a 24x24 sheet.
Jds industries
can you cut unisub with a diode? I'm wondering if it can be done and if it would leave burned edges, especially on the white side.
I would doubt it it’s pretty hard stuff.
You mentioned in another video that your EcoTank ET-15000 was modified to print dye sublimation. What modifications were necessary? I'd like to buy one myself.
add dye sub ink that is all!
Where did you buy the unisub? Was it easy to find?
Jpplus.com
Loved the video, it was very helpful and packed with a lot of tips and tricks! All good stuff for sure! I only had one question on your choice of a $2600+ heat press. What was your reasoning for that purchase?
Thank you for watching and the comment. Great question, I learned along time ago buy once cry once. after doing extensive research this company has one of the best reputations and warranty’s. in talking with several other shop owners that have one it came highly recommended. the 16x20 platen with the ability to change out size and preprogram settings is a great time saver! there are allot of cheaper options for sure but dependability and service after the sale is paramount in my business.
Thank you for the straight answer! On your Epson 15000, did you have to do anything to it to use Dye Syb ink? Modifications?
@@joegavin5300 purchase cosmos sublimation ink, that’s it. No printer profiles needed.
Thanks!
Martha, Thank you so much for the donations to the channel. I will be using it for some better equipment
Thanks!
Thank you very much for the donation. I really appreciate it!
Thanks!
Thank you so much J I really appreciate your donation to the channel. your one of the reasons for the content!
Thanks!
Mike, thank you for your donation. I really appreciate it!
Thanks!
Thank you very much for your contribution! I appreciate it
Thanks!
Thank you very much for the donation. I really appreciate it!