Part 1. How to control Resolume v6 from MagicQ [Console + PC/Mac]
Vložit
- čas přidán 29. 08. 2024
- Part 1. In this tutorial i'll explain how you can setup connection and then control Resolume media server from MagicQ console/PC[Mac] System.
This tutorial will assume that you are running Resolume on a separate machine from the ChamSys console or separate PC/Mac system.
If you are looking how to run both systems on the same PC/Mac - then check out the Part 2 of the connection tutorial
Method 1: Simple per channel mapping of functions: • Part 1. How to control...
Method 2: DMX Mapping file from Resolume v5
• Part 1. How to control...
Resolume DMX Mapping files can be found here: bit.ly/2F3Uo3U
Part 2: How to connect MagicQ to Resolume on the same Mac/PC
• Part 2. Connecting Mag...
Great tutorial ,like always, I was messing around resolume and chamsys , the personalities are very helpful. I had already connected the resolume but with 200 dimmer channels was a mess
Thanks Aziz!
super - thank u!
will thjis work with version 7 ?
if i understood well, u recommend to use 2 dfft pc’s instead of 1 machine that runs both softwares to avoid delays, right? even when it is a macbook pro 2018 8gb ram? thx 4 ur reply.
I would like to to control chamsys via resolume. (the other way round!) possible?
What do you mean? Send video from resolume via chamsys - already did a separate video about it.
Trigger magicQ from Resolume? Its possible if magicQ unlocked to be triggered from external dmx/artnet or osc - so resolume can send commands and magicQ will listen and do what you assign it to do. Again, depends on what you want. Because your question is very wide for interpretation
@@chamsysrus can u link me the video where you talk about it..? Thanks
Pls search in youtube or in playlist with english tutorials. You will find the one that you need frkm the name. I dont have time to search now but i’m sure u will find it easily. Thanks
@@chamsysrus thanks you!