I love this channel… It's amazing how this guy can fight his way through so many failures and spend so much time and effort to construct such nonsense 😂😂
Loving your videos. If you could please normalise them a little bit so the music sections aren't deafening compared to the narration, that would be greatly appreciated. tia
Great new CZcams channel these projects are great. One thing I’d like to see in the future is some links to some of the things you use/buy in these vids. I would love to know were u got the front hub motor. Again great vid just trying to help.
A couple tips for your cheap MIG welding experience. Make sure you don't skimp out on cheap flux core welding wire if you don't have gas and if you do argon is a pretty cheap gas that's quite effective to use. Also from the looks of your welds do you have your wire speed a bit too high and your voltage last temperature a bit too low. You've got full penetration welds in some spots and weak surface welds and others that is shown by the coloration of the metal around the welding area.
I foresee issues with fitting the ice tires and finding a balance between inflating too much and breaking the tire, while also having enough pressure to keep the tire from coming off. Also aluminum hubs causing thermal transfer issues.
You should try making circular Wheels. Like, I suppose this might use some sort of advanced magnetism that you might not understand or have created yet but I feel that if you're going to keep working with wheels in not hover technology is where it's going
Came here from the Hackaday article. Why 3D printed molds for the wheels when you could have used smaller plastic buckets? Whatever the metric equivalent of a 2.5 gallon bucket is should be about the right size.
Water don't freeze that fast. In Sweden we make ice-lanterns in the winter by leaving a bucket of water outside in the cold over night. Then release the ice and pour out the water from the core.
I commend your efforts! Honestly do. But i fear you have made a power slide trike. Drifting requires power at the back wheels. The idea is to control the tire spin between grip and slip. There is a reason why front wheel drive cars don’t enter drift competitions. Im sorry but you are not drifting. You are power-sliding.
That’s pretty cool! Composites are really interesting, could you make a whole 4 wheeled vehicle using just ice composites. Could be cool.
But like it would have quite little friction or what it's called.
@@viktoranderas9541 True, true. But it would be pretty heavy and probably wouldn't be a problem.
What he should do is go the other way and get an electric wheel (unicycle). These things are AMAZING and some can go very fast, like 50mph fast.
I love this channel… It's amazing how this guy can fight his way through so many failures and spend so much time and effort to construct such nonsense 😂😂
Glad you enjoyed! Everyone loves a bit of nonsense! 😄
Fantastic job, I wish more people could see this masterpiece 😄
Tom filming the doorway instead of helping was brilliant.
Loving your videos.
If you could please normalise them a little bit so the music sections aren't deafening compared to the narration, that would be greatly appreciated.
tia
Yeah, really enjoyed the video but the music was a bit much.
Love the build and execution! Cameraman banter made the video especially funny
Shame the rear wheels weren't power driven, with your welder, you could've welded some motor mounts and chain + sprocket combo.
thanks for showing the process like that, incredibly satisfying
Impressive how well the reinforced ice held up!
I don't understand how you don't have way more views. Your content is amazing
Sam really do be playing gmod in real life lol
Lol!
this guy is a hidden gem, you deserve way more followers man
I have a feeling that Garage 54 is going to come out with a wheel much like this. Impressive Sam!
I'm sorry to tell you this but you forgot to make a tr-icicle joke
Nooooooo 🤣 love it
You definitely deserve more subscribers with the cool videos you have made keep it up dude👍
Looking forward to the quad bike next!
I want one lol I never knew drift trikes were a thing but this looks like SO much fun
Hilarious! Love your content
Great project it looked like it handled pretty well !
Thanks Daniel, I’m enjoying your content too
THIS GUY IS UNDERRATED
Great work
so cool man! I loved the bit with the door lmao
amazing video was really fun to watch
I am thoroughly impressed by the fluff piecrete
Great new CZcams channel these projects are great. One thing I’d like to see in the future is some links to some of the things you use/buy in these vids. I would love to know were u got the front hub motor. Again great vid just trying to help.
Reminds me when the kids would go to Burger King in their Citroen Saxo's, put plastic trays under the rear wheels, apply handbrake and slide around 🤣
How do your videos not have millions of views? Amazing content
Love it 🤣
Amazing strong ice
This is crazy cool
Pretty cool
Dad.... Have you seen this? Lets build one too (with normal wheels) :-)
Thx Tom for showing us this
Brilliant
You need to make a whole pykrete trike. That way it’s strong. 😂
But yeah keep going I want to see more where this came from
Keep up videos dude
3:24 relatable xD
Nice Dyson dust collector.
Idk how you have so few subs, this production value is very high
A couple tips for your cheap MIG welding experience. Make sure you don't skimp out on cheap flux core welding wire if you don't have gas and if you do argon is a pretty cheap gas that's quite effective to use. Also from the looks of your welds do you have your wire speed a bit too high and your voltage last temperature a bit too low. You've got full penetration welds in some spots and weak surface welds and others that is shown by the coloration of the metal around the welding area.
This is so stupid I love it !
I'm happy , i saw a caterham
You can actually remove the cassette and use two nuts for the right side without widening your fork.
But then what was he gonna do with his new welder?
Unfortunately even with the cassette removed (which I did later on) it was still too wide…and yes any excuse to use the welder 😅
LOL New subscriber here
7:13 was concerned for a second
Rupert thanks you for your concern. 😀
Looks cool but if u want to be able to hold a drift, u need rear wheel drive not front! I'd still play on it tho! Haha
Interesting 🧐
Are you extruding or just happy to see me
oh nice this is channel type what i was looking for.... anyways make whole bike from pykrete
Use saw dust next time, you can buy it at farm supplies for cheap. It's like litter for horses.
I foresee issues with fitting the ice tires and finding a balance between inflating too much and breaking the tire, while also having enough pressure to keep the tire from coming off. Also aluminum hubs causing thermal transfer issues.
Colin Furz later year project 😂💪
Waiting for the day you make an aircraft and mix your day job with your youtube career
It really liked me 😂
When you referenced the percentage used to create the pycrete did you mean by weight?
I think he meant volume
@@joashchechet1675 TY
i got the exact same scales you got
1:25 that's the moment you realize you forgot to open the CO2 bottle :D.
Drift trike? More like a snowdrift trike! The suspension I presume was "quite hard"...
Do wax wheels next
Next up the monster truck quad
12:19 he is on fivem physics xd
I like my ice still runny in the middle, don't over-do your ice
Watching tom and sam be stupid is so funny
Now we make the whole bike out of pykrete tubing!
Don’t tempt me 😅
What motor and battery did you use?
Came here to ask the same question.
So if we add more junk to future Glaciers...
They will melt slower...
Interesting....
Me: starts polluting to save the planet
The mean comments from behind the camera around min 5 😂😂
Maybe you can make pykrete with the stuff out of diapers. It's interesting stuff.
Can you make a whole bike out of that stuff?
You made a front wheel drive vehicle. Have you not watched literally any top gear?
Try ice wheels on a frozen lake?
What if those rear wheels had multiple small desk chair wheels?
YOU ALMOST SAWED YOUR FACE UP! Also why didn't you just remove the gears instead of adjusting the fork?
So now do you believe that they could have built a carrier out of PiCrete?
pikrete beer holder?
I want a drift tri
Where did you get the electric wheel from?!
It’s a 3Kw 20 inch hubmotor from Ali Express 😀
Ice kart
easy use
Was that a stranger with the caterham?
i thought drift trikes typically powered the rear wheels.
try casein graphene plastic
A mono wheel with one wheel... something is redundant here lol
been watching too much tokyo drift
Damn, only 17.8k subs
i heard some bird call' what state do you live in, turkey? greece? cyprus?
You should try making circular Wheels. Like, I suppose this might use some sort of advanced magnetism that you might not understand or have created yet but I feel that if you're going to keep working with wheels in not hover technology is where it's going
Run water while drilling
Are you a pilot for a 737 cuz of the profile pic i had to ask...
That’s correct a captain on the 737 for the previous 5 years 😀
Came here from the Hackaday article. Why 3D printed molds for the wheels when you could have used smaller plastic buckets? Whatever the metric equivalent of a 2.5 gallon bucket is should be about the right size.
Water don't freeze that fast. In Sweden we make ice-lanterns in the winter by leaving a bucket of water outside in the cold over night. Then release the ice and pour out the water from the core.
wow
1
Shopping trolley wheels would work better
OMG, you don't understand or what? why front-wheel power???
ᅠ
ᅠ
ᅠ
Interesting point
all bicycles use 2 wheels
I commend your efforts! Honestly do. But i fear you have made a power slide trike. Drifting requires power at the back wheels. The idea is to control the tire spin between grip and slip. There is a reason why front wheel drive cars don’t enter drift competitions. Im sorry but you are not drifting. You are power-sliding.
Turn the music down
Shame it's FWD :((