Genie Garage Opener Remote Programming with Aftermarket Remotes
Vložit
- čas přidán 21. 08. 2024
- Oem Genie Garage Opener remotes are expensive, I'm going to show how to program the Genie Garage opener and to use an aftermarket remote.
Got a Question? I'm here to help. ▶️bit.ly/YTRandomFix
▶️bit.ly/YTRandomFix
▶️Link to remotes used in video ▶️ amzn.to/3bAHYx4
1. Locate the "learn code" which is typically located near the antenna of the opener.
2. Press and release "Learn Code" LED indicator will blink twice. Press and release the button on the remote you want to program. The led dictator on openner will flash or glow steadily (this varies by model). Press the same remote button again, the LED indicator will go out.
3. To check that button that was programmed, press the button again and the door should operate.
Note: each button can be programmed to a separate opener.
Compatible with Genie IntelliCode openers from 1995-manufacture date to current (NOT work if your remote has dip switches)
Replacement for Part #: 37330R, G3T-A, G3T-BX, ACSCTG Type 1 / ACSCTG Type 2 / ACSCTG Type 3 (and more see description below)
4 buttons
Programming instructions on package, battery included
Aftermarket replacement remote, Solidremote brand
▶️▶️IF THIS VIDEO WAS HELPFUL, CONSIDER ADDING TO MY TIP JAR ▶️Venmo.com/RandomFix ◀️◀️
Thanks for your support. God Bless
▶️www.spreadshir...
▶️www.venmo.com/RandomFix
▶️Support RandomFix via Paypal visit www.PayPal.me/RandomFix
▶️Facebook https: FB.me/RandomFix
▶️www.RandomFIXWorld.com
Disclaimer:
Due to factors beyond the control of RandomFix, RandomFix assumes no liability. Affiliate Partner: I'm may receive a fee from some of my affiliate partners for my first-hand recommendations.
best door openers 2020, garage repair, garage openers
How to program genie garage door opener remote
Genie Garage Opener Remote Control ▶️How to Program Genie Garage Openers with Aftermarket Remotes genie garage door remote garage door openers
Thank you! Great idea, I was actually going to get the visor clip one but your point made more sense. This video is super helpful!!!
I'm glad to hear the video helped. Thanks you so much for your great feedback 😀 . Its a great little remote
Thanks for the information
Glad to help.
I tried with two remotes with new batteries pressing three times with gap in the middle. It still didn't work. The flashing red light finally goes off automatically after 30 seconds or so.
Sorry to hear that, what brand is your opener?
Some remote openers need you to be about 6-10 feet away from the door opener unit when you push the button on the remote both times to lock in the code . Other openers need to be less than 1 foot away from the unit . Also when my remotes get wonky i chuck them and get new ones . I cant confirm but I think remotes have built in cycle to fail like 5000 cycles and they die .
My Genie garage door model G5050 doesn’t have the learning button. 1993-1995. The new remote’s are a generic brand.
Do you know how to program a Genie remote from another Genie remote? Button built into my car works but I lost the handheld remote. GDO is on 2nd home several hrs away so can't access that.
Sorry for the late reply! did you find a solution?
What brand?
link is the video description, the opener is still working great.