Video není dostupné.
Omlouváme se.
The only video you need for installing a garage door opener - Genie
Vložit
- čas přidán 30. 07. 2024
- Looking to install or replace a garage door opener? Then this video is for you! In this video I show you step by step how to install a Genie chain drive 550 series garage door opener. I demonstrate the assembly, wiring, testing and programming for this unit. This is by far the most detailed guide out there with step by step instructions so even the most beginner DIYer can do it.
Thanks for watching and don't forget to hit that like button. This helps spread the video to other users and helps me keep bringing you guys quality content weekly. Also don't forget to subscribe if you're not so that you don't miss any new DIY content!
Consider purchasing from my affiliate links:
Genie Chain Drive 550 Series 1/2HP - amzn.to/3IDIa1L
Genie Belt Drive 3/4 HP - amzn.to/48D2niG
Universal Garage Door Hanging Kit - amzn.to/3ThGhh2
Chapters
0:00 Intro
0:14 Genie Chain Drive Opener
0:41 Assembling Track
2:08 Connecting The Chain
4:14 Attaching Track To Powerhead
4:54 Mounting Track To Door Header
6:43 Mounting The Powerhead To Ceiling
8:44 Attaching Opener Bracket To Door
10:41 Wiring The Sensors & Control
12:24 Wiring Quick Tip
15:03 Setting Upper & Lower Limits
17:00 Testing Door Sensors
17:00 Testing Force Retraction
17:40 Programming Remotes & Keypad
19:38 Outro
#diy #garage #home
I rarely comment or say thank you but I’ve gotta say thank you for the video. So much easier just watching you do it than to decipher the instructions. You made this job easy and smooth. Thanks
Awesome! Thanks for watching!
Great video! Definitely saved me some time and hassle.
One note, when I powered up the unit my wall controller was not lit up. Fortunately I noticed it was in the locked position, which turns off the red light. After switching it back to unlocked, it turned red and works perfectly. Glad I saw this before chasing down all the wiring possibilities.
Thanks! Good call out on the lock button. Didn’t even think of that.
Thanks, my openers been sitting in the garage for over a month..got it done in about 2 hours by myself
Awesome!
Good video. It's nice to see what I was getting into before I installed it. Only took a couple hours. I replaced a 43 old Stanley opener. So I had to take down the old one first. The Stanley still worked but was getting a little funny by randomly opening the door on it's own. Time for a new one. Got my money's worth out of it. It's funny the technology hasn't change that much.
Thanks for watching! Yeah they are basically the same with some added features nowadays. Definitely not built as sturdy as the older units but way quieter.
Man what a great video,thank you ……now I have to find all the parts I threw in a fit of rage in my garage from trying to read that factory map guide.
Haha thanks. The manual sucks and is hard to interpret some of the steps
I am trying to figure out how you only have 7k subs! Great video!!!
Thanks! I haven’t been at it for long honestly. Hoping to crack 10k this year.
Great video I followed it step-by-step and I have completed my genie garage door opener and I thank you
Thanks for watching! Glad it helped
Thanks for this video. It really helped out a great deal.
Welcome! It can definitely be tricky to install
Thank you. That paralleling the sensors was a nice little tip. Still barely had enough wire clips. I would add, cover the exposed wires of the floor sensors with some black gaff tape so they don't get all gunked up over time and help slow any corrosion.
Welcome. Yeah wouldn’t have had enough wire on my far side door from the main control to reach so it definitely helped. Good idea with the gaff tape
I really hate the provided wire, almost impossible to split it to separate without exposing the interior wire. Added a lot of tome to the install.
@@jaycuster1180 Yeah it's a pain. I took diagonal cutters and cut lengthwise at the end I was going to strip then pulled it apart before stripping. Seemed to work good
14:05 is a red wire the same as a stripped wire ?
Excellent video. Good details
Thanks for watching!
Good job. Very helpful. What is far from helpful is the shoddy quality control from Genie. I found a couple of things that were assembled backwards - SLIPSHOD. I expected it to be easy, but these things cost a TON of time to finally figure out that they were put together at the factory the WRONG WAY.
Geez. What was messed up?
@@theguyofalltrades - The plastic housing that sits in the track and through which the screw rod travels - the one that the metal bracket that holds the track to the motor housing was put in upside down at the factory. I kept wondering why there wasn't a slot that would allow the bracket to seat like it was intended. I finally had to pull it out and turn it upside down and it all worked as it should - GRRR!
AND WORSE, the plastic carriage in which the cheap pot metal screw-slider is supposed to be seated - well, I am not even sure how this happened or if it can be fixed, but after getting the motor to spin the screw, it wasn't engaging and moving the carriage. Odd. I went up on the ladder and was moving that plastic carriage around when suddenly something fell and hit the garage floor. It turned out to be that pot metal screw dingy. So there is no way to put it back in there without taking the entire motor and track down and then fiddle fucking with it - that is, if it can even be put back as it appears the plastic clip that holds it in place is either missing or it too hit the floor and went god knows where. I don't even know how this was possible except cheap - cheap - cheap numbskull labor and shoddy QC.
@@jacquesmersereau4173 Definitely not as stought as the older Stanley and Craftsman openers
Great video. Thanks
Welcome
Ive installed many openers. This Genie installed pretty easy and straight forward but I think there was a sensor issue. The transmitter kept blinking 3 times pause and 3 times. I had to contact support 3 times. Their support no nothing about installing and just read possible fixes. They had a care less attitude. All 3 of them. I even held the sensors an inch apart and they wouldnt connect. Wound up sending it back and bought a performax from menards. Wont buy a genie again.
Great video. Very well done.
Thanks for watching!
Thank yoi for this video you made me look like i know what i was doing lol .i just subscribe.
Welcome! Thanks for watching and subscribing!
Great video! Do you know if I would be able to replace my 1035 power head with the 2035? Just the power head, everything else would stay the same (track, chain, mount, sensors, wiring, etc)
Thanks! I think the only difference might be the track. You would have to look at the top of the power head and see what the track mount looks like. The electrical should be the same though I believe
Thanks for the video. Great job. Just curious why you chose a chain drive over a belt-driven unit? In your opinion are the chain-driven units that much louder than the belt-driven units? Thanks again for the video. I'm replacing two 45-year-old Genie screw-driven units at my mother's house...that still work! It's just time to put these guys to rest. They're getting loud and we're down to one well-used remote. Well done Genie.
Thanks and welcome. I think I chose the chain drive because it will last a bit longer than the belt drive from what I’ve read. These are fairly quiet compared to the original craftsman that came out. I think most of the noise was the motor itself. The only thing I don’t like is the track because it’s in sections that slide together instead of bolting together but other than that it was easy to install and program. They do make a bunch of different versions with some cool features if you’re looking like WiFi and cameras etc…
nice editing, covered lot of ground thoroughly and quickly
Thanks for watching!
Great video! Very informative. What would you charge for this new install? Ball park? Thx agian.
Prob $300-500 based on how much time it took me to
Thanks for this video! One question: it seems that I have to hold the button on the wall for the door to shut but if I hit the button for it to come up it works. Any ideas?
I would check to make sure the lower limit is setup and the door sensor beams are aligned. The lights shouldn’t be blinking
Great video and i appreciate the added tips. Would have been nice to see a lil more info like how to seperate the wire. In the instructions it looks as if there are two sets of wires. It was confusing bc i didn't see a striped wire. One side has lettering identfying it as type cl 2x....i assume that was the striped wire? Dosent look anything like the pic.
Yeah the writing is the striped wire. Mine had little hashes on it also. To split it I used diagonal cutters or a utility knife then just pulled it apart
Really great video. Does the set up actually lock the garage door if someone doesn't use an opener or know the code?
Thanks for watching! Not sure I follow your question though. Which part are you specifically talking about locking?
@@theguyofalltrades can anyone just walk up and open the door?
Nope. Not unless you have the emergency release pulled. There is also a vacation mode where you flip a switch on the main wall button control and it won’t allow the door to open even with a remote
@@theguyofalltrades thank you!
Welcome
Thanks for the detailed video! Is the rail from the motor to header supposed to be level or is the motor supposed to be lower than the header. I’ve read online some people say yes and some say the motor should be angled lower.
It honestly works either way. My motor is a little lower than the header because of the bulkhead that covers my support beam extending down a foot.
@@theguyofalltrades thanks. The reason I asked was because recently I’ve noticed the rail bends when closing and sometimes It will stop while door is closing and opens again. I’m thinking maybe the rail is too high at header ? I have to help push it down to close it at times. Any ideas what it can be? There’s nothing in the way of the light beam below.
Possibly the power head needs to move forwards a bit or your chain needs to be tightened. The rail sections will grab the black plastic carriage slider if not tight. I would check the chain first. Then maybe loosen the mounts on the power head and try to slide it towards the door direction a little if possible
@@theguyofalltrades Thanks I’ll check that out.
When I try to set the down movement it just blinks red could that be the wiring
If it's blinking red it could be your door sensors or wiring
What should I do if my lights aren’t turning on the program button on the opener it self
Not turning on at all? Did you verify that you definitely have power to the head unit?
I noticed you did not have to program the wall console. Assuming the wires are correct, does that mean the wall console controller works without programming? My home has 4 different wires and I can't seem to figure out which wires goes into which terminals. There's a striped red and white wire and a striped black and white wire.. any idea?
Wall control does not need to be programmed. So they are in pairs, the striped red and white would most likely be a pair. Best bet is to see which wires are going to the door sensors first if this is an existing installation. Then lookup the model of the opener on google and find the diagram of the terminal layout.
@@theguyofalltrades how do you fix the safety beams if the red (source) is blinking 3 times? the diagram says it could be a source interference, but there's nothing in front or behind or along the line between the red and green sensors.
How to fix a genie garage door sensor blinking red 3 times #shorts #garage
czcams.com/users/shortsopy1zeLrJdY?feature=share
@@theguyofalltrades unfortunately this video and many others only show explanation on if you have 2 garage doors. We only have 1 and there's interference somewhere and we have no clue where from
So my belt is at 1/4 inch but seems VERY tight. Is that normal?
It’s actually against the carrier. You’d think it would rub
I’m not 100% on the belt drive since I have a chain on mine. I did see a couple good videos on CZcams for adjusting the belt
8:20 If at that point you open the door, you can get the motor pretty much dead on center.
btw: doesn't there suppose to be a cover for the motor's gear. Mine hadn't come with one.
No cover on this one
@@theguyofalltrades Okay, Thanks. Just finished up the wiring. All works
great. Thanks for doing the video!
@@timippolito1182awesome! Great to hear. You’re welcome
15:03
Well, i am now overqualified to figure out wth happened to my garage as i cannot call a technician to fix it because they are gonna charge me for a new garage door or something stupid like that so THANK YOU! 🫶🏾
Welcome!