Building Fence braces for our new pasture area.
Vložit
- čas přidán 16. 05. 2022
- Gripple Torq Tool: amzn.to/3kX9AkV
Gripple Fence Splice (Medium): amzn.to/3kOzzL9
Knipex Cobolt Compact Bolt Cutters: amzn.to/39g0w8d
Buy T-Shirts and Hoodies on Our Website:
www.countryviewacreshomestead...
Our Amazon Shop full of great Homesteading items:
www.amazon.com/shop/countryvi...
TYM Tractors: tym.world/en-us/
E-mail us at: countryviewacreshomestead@gmail.com
Send Letters to:
Country View Acres
P.O. Box 469
Robinson, IL 62454
Our Facebook page: / countryviewacreshomestead
Our Instagram Page: / country_view_acres
We live in southeastern Illinois on a 41 acre homestead. We just finished building our log cabin in 2018. Now we are focused on trying to grow our own food and raise livestock. Follow us on our journey we continue to develop our homestead and farm, while becoming more self sufficient.
#farmfence #homesteading #hobbyfarm
I've built lots of fence. My next ones will be braced like this. Looks a lot better, and more structurally sound.
Evan, you have building the corner posts down pat and they will be there for a long time. I like watching you build things as you don't take short cuts and you build quality into any project you do and that is awesome.
Thanks for the helpful video! Love all your videos! Keep up the awesome work!
Your fences will be there for a long time. They look so nice.
I have built miles and miles of fencing contracted by the government and to their specs and your fencing is as good as any of what I have done. Great tutorial for the uninitiated.
When I was young and building fences on the farm I grew up on, we did it just a bit differently. We did not use a wooden post as the cross member, we used a 2-1/4 or 2-1/2 steal pipe. Then, as we did not have portable power tools, we used a "brace and bit", with an adjustable sized bit, to put holes that faced each other in the fence posts into which we would put the pipe. If the pipe was a bit to long the good old fashioned hacksaw came into use. But typically we would just make the hole in the post a bit deeper or set the posts slightly wider. Only the corner post was completely set as this process started as the other post would need to "wobble" a little bit. Then we used a double strand of normal heavy duty, I think #9 wire, that we would wrap around the posts so they were parallel to each other, not in a figure 8. We then would pull the wire as tight as we could and tie it to itself near one of the posts, with the ends of the wire on the posts held in place with staples, typically more than one. At this point we would start to put the dirt (and rocks) in around the other post. We used a heavy smooth steal rod to bridge the gap between the wires in the middle of their length and rotated it around, causing the wire to twist on itself which would tighten the wire considerably. As it tightened up we would finish putting the dirt around the previously "wobbly" post. We knew the wire was tight enough when it just started "eating" into the wood of the post, at which time we would put in a couple more staples. The steal rod used for twisting would be left in place but the one end of it would be driven into the ground, only a short portion of it was left in the twisted wire pairs. We didn't want the twist on those wires coming undone.
As I said, very close to what you are doing. Except I knew that my steal pipe, sticking down in those holes, wasn't going anywhere. No rolling or any or any other kind of movement, it was tight.
We would stretch the woven fence with a "clamp" as wide as the woven fence that would bolt to the fence and would be connected to the draw bar of a tractor. We could pull that woven fencing tight, not quite like a fiddle string, but good enough for the job at hand. Once the woven fence was stapled to several posts (every third post was a wooden one, the rest steal) we could remove the clamp and wrap the trimmed end of the woven wire around the corner post and twist the strands around themselves, all held in place with more staples.
Building a fence like that is a LOT of work. I learned to really appreciate electric fencing. ;-)
It's so fun to see how far you've come with fencing 😁 I remember the barnyard fencing took quite a while 😂 I'm happy to hear you are adding a gate at the other end of the pasture. It makes so much sense 👍 I can't wait to see the steer in their new pasture ❤️
You do know how to do fencing for sure! I enjoy you and your brides work. I think a lot of you you've taught me so much!
Looks good Evan, always enjoy watching you build fences. Thanks for sharing with us. Fred.
Enjoyed the video Evan that was a awesome video that is a nice looking tractor 🚜 and your roller in the other video look good to I have a 678 new Holland roller it’s a 5 by 5 role me and dad clean it up yesterday I took off yesterday from work to get it ready got to grease it I will have to get some new belts for it later they are starting to wear out and them belts are not cheap looking forward to the next video and when you get some cows 🐄 😎👋🚜🇺🇸
A thankless task but you’ll be thankful when it’s finished.
Good evening Evan, looks great, first time I ever seen a fence build that way. Steve from N.B Canada
That is going to be a nice strong and beautiful fence.
Yeah Evan, another great video
Very clever Evan , it’s very enjoyable to se how organized and knowledgeable you are doing your work
Thanks for sharing your knowledge. It really helps me a lot.
Evan you used staples on one end to keep wire from digging into post. Why don't you use them on the other end post?
Nice to see a skill honed and speeded up. Looks good.
Pretty much do my fences the same way, except I run wire tensioners in an "X" pattern (both directions). One thing I will suggest is I top all of my posts with a 6" PVC Sewer and Drain Cap, with a 6" long piece of 6" S&D pipe glued inside of it. Makes a perfect fit on 6" wood posts. I secure it with 3 small stainless flathead screws. You can paint them any color you want, and the water will NEVER rot out the top of the post. Guaranteed. These caps are very inexpensive compared to buying actual post caps, which are $$$.
Good job Evan!
You're a good instructor.
Looking good, Evan! The steers will be in hog heaven!😜
Steer Heaven
Thanks for bringing us along on the journey!
This is incredibly helpful for the fence I'll be building. When the wife says she wants a mini Highland cow, I've learned to just say yes and work it out later.
First one here. You guys amaze me all the time. Thank you
Very good DIY for building a fence cross brace. Good job I enjoy your videos.
Awesome job Evan! Post corners look great! I tell you what Evan your audio is amazing! So clear!
The way you built the fence braces will last for years and years. I enjoy watching your channel. Always something to do on a farm.
I just love learning from you. I absolutely would've put the hole for the connecting rods in the middle of the rails 😏 and I wouldn't have done the wire bracing.😵 You think things out, but even when you make a mistake, you calmly think of a way to fix it, and you learn from your mistakes...and so do we. Thank you Evan!
Came a long ways since the last time I saw you doing corner post. Great job
This fella has taught me much in just the first 10 minutes! Thanks brother
Thank for the great video. Looking to do my own fencing on our new homestead and this helps immensely.
Awesome videos. Thank you for making these!
Hello Evan nice work. Have a great day
Very impressive and the job was done like a professional
It really looks more like a farm with the fence …great job
Nice Evan. Those fences will be there for a long time.
Great job and video ✌️ lots of work bro 💯✌️💚🌱
I find fencing oddly satisfying!
Nicely done, that should last for years, cheers my friend.
I remember your first one’s. Great job!
Enjoyed watching. Really coming along
Impressive time on that brace! 👍
Great video,and great job!👍🏻👍🏻
Great job as always!!
Been ranching over 30 years and I STILL have yet to have anyone show me the benefits of an H brace in a fence rather than a Z brace on the pull corners. Suppose I need to figure out a way to get rid of this common sense I have.
Great work. Under 11minutes is impressive!
Nice work, good job
...good job, great lookin' fence, keep safe...
Nice job on the fence, enjoyed watching
Good job man enjoyed watching
Very smart, and safe, thanks
This video really help me how to put cross braces up. Thanks
Great job.
You make it look easy. I’ve been fencing for a while and still not that fast
another great video
Evan, Videos that are 21 to 23 min make the most money
I remember those days in Kansas. Hedge post either freezing or hot. (Thinking to yourself don’t quit…. The power bill needs paid) 58 Here
Back in the day we used fence pliers and barbed wire.
Looks like your building braces in accordance with the EQUIP Program. That’s the way all mine are.
Cool....
Is it a bit warm over in your part of the world Evan. Shirt getting a bit damp with sweat. Keep hydrated Bro
The bracing on my fences are either steel pipes where they are bolted or with the board twisted to remove the slack none of which I did
Evan, would you brace the posts differently if you were to attach a gate to it?
Did you plumb your corner posts straight vertical? I've seen where some people tilt the corner post away from the direction of the pull about 2" at the top. Thanks.
"Just a few acres farm" just did a breakdown of raising pigs to market. Cost, weight, butchering, feed etc. Everything you need to know on a small pig farm
Question. Does the base of the brace wire create a foot trap? If so. What can you do to prevent the foot from beating trapped? Thanks for the video.
Can the gripples be used? Great video.
Hey Evan! If I’m just trying to make a fence with some rustic wood just for aesthetic purposes (make it look more like I’m in the country when I go to the way back yard hydrangea garden, would I still need the high pencil wire? Also, I’m a 60 year old lady and I was wondering if I could hammer a T post in the ground and then (somehow?) attach the post to it so I wouldn’t have to dig a hole? I’m just going to use these post that you get at Lowe’s. I don’t know what they are called but they are thinner than yours and kinda flat on 2 sides and round on the other 2. Kind of oblong!
What size auger bit do you use for the 8” post hole digger?
👍👍❤
what kind of wire did you use for the bracing?
We rebate our stay post into both posts. Looks tidier. Plus the stay post is too low .
Kiwi fencer
I'm turning 29 next month and have been installing fences since I was 14. what is that wire stretching tool that you're using??
9" or 12" auger for the digger?
what is the name of this tool you use to stretch wire? I need to buy one
Why not drill the thru hole after you install and level the brace?
Because knowing my luck, if I drilled through from the opposite side I would miss the brace. So doing it the way I did, I know 100% that the hole is where I want it.
U should buy are couple horses
What guage is the tensil wire
I want a pick'm up truck like that one.......This is what my Granddaddy would have called a truck farm.......Easier to operate that large acreage farms....
Do you know what thickness of high tensile wire you used?
I believe it is 12.5 gauge
@@CountryViewAcres Thanks!
How do you know what to torque it to?
I torque it as high as I can. About 400 foot pounds.
@@CountryViewAcres Thanks! Great video.
a nail saw would have done much more work than a hand saw don't you think
If I was you better something going around the other way to because cows are not stupid and I have seen it happen before just let you know that
"Honey. The kids are here!!"
czcams.com/video/mtOD19C7J48/video.html
That's a lot of baby goats
@@CountryViewAcres More than I've ever seen! I figured Rebekah would like to watch that one!
czcams.com/video/ZOAE76fqosA/video.html
HE ANT NO COWBOY
Bla bla bla..
Mega love and support from James G. let's connect and be new friends