Super. I have this locomotive, and for 40 years, it has been the most touchiest locomotive that I have ever operated. Reliable, but needy. Clean wheels, lubrication, and clean contacts keep it running, inside and outside, but I easily put twice the effort into this locomotive, and its two GP-40 cousins, maintenance wise, compared to an Athearn Bluebox SW-7 or GP-9. The chassis of this switcher is the "C" truck from one of their old school C-C diesel locomotives, and you can switch to a "B" truck and have a four wheel switcher, as the old school trucks all mounted the same way, (pin, central metal gear) had removable sideframes, (GE/EMD/MDT) and transmitted power the same way. (Two wipers to the cast metal frame.) I have two of their old school GP-40s and this Plymouth switcher, and while they are great runners with all wheel drive and all wheel pickup, they require more maintenance than other comparable locomotives. I also believe that this may be the only six wheel Plymouth switcher available in HO scale. Hello again from the Tracy Mountain Railway in Colorado. 💙 T.E.N.
I'm not surprised to hear that, I think Athearn has always had the upper hand in terms of quality. Having said that I like this design far better than many other products they've made. No plastic driveshaft to sheer, metal gears on each axle, and thick gears made for something I could see lasting a while.
I do like this switcher, and it is a real puller and a slow speed scale modelers dream, but I do wish that it had a slightly higher gear ratio, as none of my other locomotives like operating with it. (DC) P.S. Good video. 💙 T.E.N.
That Lima loco does have the contacts on the outside of the wheels. It is a 100mph ac electric loco and should have a pantograph on the roof. The brushes fit in a specific way round - one end has an indent where the spring should sit.
I got cut off. That might be used for tires, and I found the pack of hair bands(it contains 3 sizes). The one I the middle of the pack is usable for ho diesels. I'm have quite a number of them in The pack. I haven't tried, but the large size might work on steamers. So if you're needing some buy a pack of Goody bands.
That is a cool bachmann locomotive 🚂🚂!! I'm glad that you it fixed and running again! You only paid $4 for it😮😮😍😍😁😁👍👍👍😉! Keep up the great work with these locomotives and fixing up your train set up😊😊❤❤❤😊!
HA ...Yah I got back into Ho Trains after almost 30 years I started watching your channel this year 2024..and started collecting train sets off eBay first and the Train sets I had in 1995 and gave to my nephew came back to me with buildings, etc....Now I have enough Trains, Cars Etc. for 3 4x8 train lengths to play with in the garage.
I just started watching your CZcams and you have a very informative and interesting show.i see that you have quit the train collection going. You probably have the great rio grande intones I haven’t seen any fan yet but one of my favorites is right here in ft worth. The ft worth western rails. It’s worth looking for and just seeing the colors and unique style. I hope you look it up and take a peak
Hi Harrison, I keep missing these Live Streams so I'm wondering if you send out any advance notice? I do get to watch after the fact so great video. Jersey Bill
I usually don't just because I find things have a tendency to spring up here at home. I don't want to tell everyone I'm hosting a livestream and then disappoint if something gets in the way.
@@SMTMainline I understand but did not know whether I was missing something. You had over 10K log in to this live stream so I can't imagine how many if you announce it beforehand. Thanks for getting back to me on this. Jersey Bill
You can put a little bit on the top to connect it to the motor shaft bit be careful not to get it in the teeth. Put a drop on something and apply the glue with a toothpick.
@@SMTMainline yes! It was weird because only in middle school but in high school not somuch. ? But any way Iike you say sometimes in your videos. Model rr has always gave me serenity!
Iam having problems with my club over dirty track never a thank you this what starter it all, now they are making use clean are wheels every time we run to keep track clean, I broke 2 my ATHEARN DDA40X's It's going to cost me money to get fix, teens are getting it also, I been also making videos for a guy who been taking them for his music videos Lexie The Britannic Diesel that he goes buy on CZcams, He likes my big ALCO unit C855A and B, He goes be Lexie ALCO C855, Any way did get the DDA40X 6900 running yet? I wrote you a comment did you that other E-mail was about ATHEARN DDA40X's?
G’day from Australia. I’m glad you are going to an ‘N’ scale fix. Cheers.
Super. I have this locomotive, and for 40 years, it has been the most touchiest locomotive that I have ever operated. Reliable, but needy. Clean wheels, lubrication, and clean contacts keep it running, inside and outside, but I easily put twice the effort into this locomotive, and its two GP-40 cousins, maintenance wise, compared to an Athearn Bluebox SW-7 or GP-9. The chassis of this switcher is the "C" truck from one of their old school C-C diesel locomotives, and you can switch to a "B" truck and have a four wheel switcher, as the old school trucks all mounted the same way, (pin, central metal gear) had removable sideframes, (GE/EMD/MDT) and transmitted power the same way. (Two wipers to the cast metal frame.) I have two of their old school GP-40s and this Plymouth switcher, and while they are great runners with all wheel drive and all wheel pickup, they require more maintenance than other comparable locomotives. I also believe that this may be the only six wheel Plymouth switcher available in HO scale. Hello again from the Tracy Mountain Railway in Colorado. 💙 T.E.N.
I'm not surprised to hear that, I think Athearn has always had the upper hand in terms of quality. Having said that I like this design far better than many other products they've made. No plastic driveshaft to sheer, metal gears on each axle, and thick gears made for something I could see lasting a while.
I do like this switcher, and it is a real puller and a slow speed scale modelers dream, but I do wish that it had a slightly higher gear ratio, as none of my other locomotives like operating with it. (DC) P.S. Good video. 💙 T.E.N.
I'm going to watch this now ...... Best of luck buddy!!!!!
Wonderful work man ❤❤ 33:32
great show Harrison!
Thats cool I remember having a bachmann engine like that but it was a
N scale not HO good work
I live just a few miles south of Plymouth, Ohio, where the factory was Our Plymouth locomotives.
Nice
Just need a pantograph to finish the n gauge loco. Thanks for the video.
I am sooooo sorry I missed this live stream ..... I have the same locomotive and I dont nknow how to get into this thing!!!!
I added lights to an Athearn by drilling a small hole to use a screw for ground wire. You had plenty to do that too.
Amazing stream SMT
Our Oct Show Is Coming up shortly we Will Be Goin to That.
For Starting A 4x8 I would Use Code 83.Don’t Use Flextrack To Start on A Small Layout.sectional Track Would be The Call.
Tats treu i nkow dat from mi gampa
That Lima loco does have the contacts on the outside of the wheels. It is a 100mph ac electric loco and should have a pantograph on the roof. The brushes fit in a specific way round - one end has an indent where the spring should sit.
Thanks for sharing.
I just missed it :(
Same
When Running Trains It’s Not Gonna Matter for Me and My Wife We Are All Dc.
Jah but its waei tu expensiv but if Manege to du IT than IT,s pritti cool
I have this loco too. It actually runs well.
You are a great train fixer
sorry I missed it smt
I got cut off. That might be used for tires, and I found the pack of hair bands(it contains 3 sizes). The one I the middle of the pack is usable for ho diesels. I'm have quite a number of them in The pack. I haven't tried, but the large size might work on steamers. So if you're needing some buy a pack of Goody bands.
❤
Hi SMT
If you replace the traction tyres with fleishmann 948008s, you will have great traction.
Hey I would go with a dcc set to start with and here is a good one I think is the echo valey set good to here that u all are enjoying trains
I'll have to have a look at that set.
I buy the same tubes of glue and pour them in the bottle with the brush.find the cover glues itself to the tube
That is a cool bachmann locomotive 🚂🚂!! I'm glad that you it fixed and running again! You only paid $4 for it😮😮😍😍😁😁👍👍👍😉! Keep up the great work with these locomotives and fixing up your train set up😊😊❤❤❤😊!
For sure, it was quite the deal.
HA ...Yah I got back into Ho Trains after almost 30 years I started watching your channel this year 2024..and started collecting train sets off eBay first and the Train sets I had in 1995 and gave to my nephew came back to me with buildings, etc....Now I have enough Trains, Cars Etc. for 3 4x8 train lengths to play with in the garage.
Thanks awesome, I'm glad to hear it!
Wire it back
I had bought a pack of silicone hair bands for girls. I meant to use them for Athearn band drive. I then needed to find tubing that might
I borrowed some of those from my sister for the old Athearns. They do work but they don't seem to last very long.
Hello from Spreyton Tasmania Australia
Nice train 0:15
Hi there , I would love to be entered in the free giveaway for your box of goodies 🎉❤ Thank You & plz give Nerf Cat some snuggles 🎉
You'll need to comment on the specific videos since the draw is done by a random comment pick.
I just started watching your CZcams and you have a very informative and interesting show.i see that you have quit the train collection going.
You probably have the great rio grande intones I haven’t seen any fan yet but one of my favorites is right here in ft worth. The ft worth western rails. It’s worth looking for and just seeing the colors and unique style. I hope you look it up and take a peak
Thanks. I do have a couple Rio Grand locomotives - I like the paint scheme.
Bend it, then test again.
Hi Harrison, I keep missing these Live Streams so I'm wondering if you send out any advance notice? I do get to watch after the fact so great video. Jersey Bill
I usually don't just because I find things have a tendency to spring up here at home. I don't want to tell everyone I'm hosting a livestream and then disappoint if something gets in the way.
@@SMTMainline I understand but did not know whether I was missing something. You had over 10K log in to this live stream so I can't imagine how many if you announce it beforehand. Thanks for getting back to me on this. Jersey Bill
Pretty cool n scale.too small for my fat fingers
HEY you seem to know your stuff thanx I am 75 and building my first railroad. would love to enter your giveaway locos or rolling stock all is good
Sure thing. Also what got you interested in the hobby?
I Think You have to Unscrew from the Bottom.at The Gas tank.
It turned out to be the roof.
Can you yous crazy glue on power torque motor metal gear
You can put a little bit on the top to connect it to the motor shaft bit be careful not to get it in the teeth. Put a drop on something and apply the glue with a toothpick.
I have Bachmann Burlington Plymouth. Purchased new some years ago.
Have a video on-line if anyone is interested.
Love the videos! Been subscribed for. almost a year I think. Your repair videos have been so helpful! How do we enter the give away?
You just have to leave the comment on the train show video with a notice of interest.
Would love to have your free items and have a wonderful day . Thank you.
Good luck!
I was picked on or at or made fun of for being into trains in school. Heck but my hobby brought me happiness
It's not fun to go through but once its over staying in the hobby proved to be the right choice.
@@SMTMainline yes! It was weird because only in middle school but in high school not somuch. ? But any way Iike you say sometimes in your videos. Model rr has always gave me serenity!
So he’s an Aussie dog
The breed is actually American based but with roots from Australian Collies.
dont see many six wheeler that style
You didn’t show the KFC….
😊
Yeah, I got distracted with testing the locomotive lol. I'll do it next time.
Iam having problems with my club over dirty track never a thank you this what starter it all, now they are making use clean are wheels every time we run to keep track clean, I broke 2 my ATHEARN DDA40X's It's going to cost me money to get fix, teens are getting it also, I been also making videos for a guy who been taking them for his music videos Lexie The Britannic Diesel that he goes buy on CZcams, He likes my big ALCO unit C855A and B, He goes be Lexie ALCO C855, Any way did get the DDA40X 6900 running yet? I wrote you a comment did you that other E-mail was about ATHEARN DDA40X's?
I got a locomotive for $20 USD and surprise it had DCC! Is that a steal or what? It's an old Athearn F7
That's awesome. Even the decoder alone is worth more than that.