This Gearbox is So Powerful it can Pull a CAR! (3D Printed)
Vložit
- čas přidán 9. 03. 2021
- This gearbox is so strong/powerful and it can pulls a real car. All the plastics are 3d printed PLA. The gearbox uses 775 dc motor and the gear ratio of the gearbox is 98:1. The worm gear has 40 teeth. So the gear ratio in the worm gear mechanism is 40. Here there is a really high torque increase in one stage. I choose to go for helical gears on this one because they produce a lot less noice than regular spur gears and the forces on the teeth are transferred more gradually. Output shaft has a 20 mm diameter and I used 2x6004(ORS) roller bearing to support this output shaft.I was able to test the gearbox to a torque of about 43 kg*cm.During testing none of the gears broke, they were all printed in PLA.
Do not use this design in the professional field. Because you can't trust to plastic parts!
Below are all the parts I used in this project:
12V DC 775 Motor(100 Watt)
608zz bearing x3
6004 bearing x2
20 mm aluminium shaft
M8 threaded rod
Cotter pins
2x30-x4
3x50-x1
STL files for plastic parts: www.thingiverse.com/thing:479...
Editable source files: www.cgtrader.com/3d-print-mod...
More details: hackaday.io/project/178194-3d...
Music on the video:
Artist: Dan Henig | Track: Danger Snow
www.bensound.com
Waltz of the Flowers by Tchaikovsky
CZcams Audio Library
Frames by Pyrosion
/ pyrosioncreative Commons -
Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_frames
Music promoted by Audio Library • Frames - Pyrosion (No ...
Keys of Moon Music
The Road to Your Inspiration
• The Road to Your Inspi...
North Edge
• North Edge - Heroic Ep... - Věda a technologie
Really impressive! I expected the gear teeth to be stripped off and, instead, it broke the rope.
Thank you! It was fun project:)
@@retsetman9698 I believe you! It far exceeded my expectations when I saw it in my suggested videos :-)
Very impressive mechanism, great job, bro! Keep it up! :)
0:32 top quality animation, two mating gears spinning in the same direction :D
Impressive. Deserves way more views for the production quality.
Thanks man!
Op00
Are you fucking high? This is the shittiest “production quality” I’ve seen in any video of this kind 😂😂😂
Majority of people are stupid the more complex is the thwart the less people interested there we have Biden as president and now the Biden regime making more stupid people
thanks for the license plate. now im gonna do absolutely nothing with it
4:54
thank you this helped me realize what i was doing wrong with my gears
The world need someone so creative like you! Thank you so much.
Abicim ben seni yabancı zannediyordum videoları bakıp adamlar ne yapmış helal olsun diyordum plakadan türk olduğunu anladım helal olsun sana reis videolar çok iyi emeğine sağlık
Halıdan anladım direkt
@ Ben rulman üzerindeki Turkey yazısından, herkesin bakış açısı nasıl da farklı :))
Ben başka bir videodaki damacanada yazan erikli yazısından
P9póp
34 palkasından hemşerim olduğunu bile anladım
A very good project !! well done. Thank you for sharing.
Heartly congrats my friend!! you did it!!!!
Impressive! Great job!
Cool design
A very interesting and well-made video.
Great video keep up the good work!
I can’t help from wonder if there is a voltage drop under load with the wires just hand wound around the battery terminals. Higher the current (load) the more resistance (loose connection) will restrict voltage thus artificially limiting your power (watts).
If there is a measurable drop you could just print some clamps to go around your wires to maximize the contact patch.
I enjoyed the video! In my opinion, if you use a pulley and a metal string, you can lift high-weight objects with a little less force.
THanks, gives me hope for my idea.
Hey friend, this is awesome. You are very creative. Amazing!!!
Impressive!
Interesting project!
Well made gearbox. I am also amazed to see that you can repair the frame with simple reheating the plastic without it later being too weak at those same breaking lines.
tebrik ederim çok güzel olmuş umarım istediğin yerler gelirsin
Kamaal hai yaar its really amazing💥
Excellent job 🙏🕊
Nice info, thanks for sharing :)
Thank you
Wow amazing work, thanks for sharing the stl 🌟
Thank you bro
Just what I needed for my next agricultural project thanks a million
Keep going your way cool !!
Very interesting mechanism you made here well done!! i had a few thoughts if your interested??
1 heavier gauge wiring to limit loss of power due to heat?
2 properly mounting your winch frame to remove all the variables of the rope stretching back and forth (thats energy loss)
3 a couple snatch blocks and maybe a nano cable or something similar? I realize this doesnt change the output of your gear box but might be cool to see its potential to do something truely surprising.
You seem to have a great understanding of worm gear design ! There are many more designs show me another? Thanks
That was fun to watch. Great video. 😀👋💖
Thank you:)
Pretty impressive
Fantastic. Danke. Gracias.
Thank you for the video! It is good job!
Thank you!
congratulations
Good job
Thats Awesome My Dear!
Thank you so much bro!
Damn impressive
Mind blowing torque
Very good
Güzel proje olmuş tebrik ederim
Well done, again. 😃
Thanks dude:)
Great video.
Thank you👍
This was interesting af
Nice
4:11 "It's fun!" Heck yeah!
A magnificent winch
Nice work keep em comming
What would have happened if you just had used one pulley at the other end to return the cable back to the block
Bu demir kapı bile acabilir. Guzel proje, eline saglik...
I don't think it can pull me outta bed in the morning
Güzel projeler
That's a good demonstration of how little force is required to move a car. You can push a car in neutral, and it will move fairly easily, across flat terrain.
You should have put a pull scale behind it, to show force behind it.
And obviously, if you changed the gearing, you could move more weight, but even slower. Compound pullies would increase the amount of weight the string would support too. Moving the supporting strings to the axle would even mitigate the need for the stronger frame or gears. You could lift the entire car off the ground, with sufficient planning. It looks like the string you're using would require about 16 loops on compound pullies, or 32 static lines. There's a bunch of relevant math that I'm not going to do. :)
that rope attached to it is actually powerful
Great 👍
One word "awesome"
Emeğine sağlık. Müthiş olmuş👏👏
I love that you just show your registerplate whit out burring it out. 4:53
The little engine that could!
That was great, but I think you can prevent the box from breaking adding more filler
The sounds are genuinely frightening
Woooow you are champion ☝👍💣📣
You gotta add a pulley to max out that pull weight lol. Great design awesome video 😊
Other factors with winch assemblies to cause torque problems : the size of spool that your line is being spooled onto : witch way your line is spooling ..the top of spool or bottom just to name a few . You are very talented machinist of home projects on a higher than normal level . I've never utilized a 3d printing machine yet . I build many things in my yard without welding or really much more than bench grinder , angle grinder, corded drill , cordless drill. Drill press from 1960, files , self tappers, ect. I managed to build a 55 mph garden tractor out of pulleys , belts , modified centrifugal clutch ..actually I've built 3 of them with different drive systems , my most recent almost success very difficult was to build an o scale truck and motor assembly for an old gp9 diesel loco that was broken beyond ..I don't suppose you build items for folks that pay do you ? Or even accept a challenge that is suggested such as the locomotive motor assembly ? I bet you could do it no doubt ..message me back please Im liking subscribing to your channel now thanks . ( add a block to double pulling force to your machine)
Thanks for giving that gear a grease
One day you pull a plane with this 😁😁😁
This is very cool. I have been kicking around an idea like this but with a 300 watt 48vdc scooter motor to make a mini winch for my 2wd ebike that I take off road and mudding here in Texas. It's heavy, around 110 pounds or 50kgs, but when stuck, it's twice that weight with the mire factor figured in. The smallest motor I can find in 48vdc are 500 watt motors. You should design and build a duel motor winch like this or one with a scooter motor and see what it will pull. Keep up the great work.
Good
I'm going to print one of these for my Samurai.
Hello my friend.
You have created a beautiful electric winch scope with 3 D printing. A beautiful worm gearbox design. Magnificently strong. congratulations. Thank you for sharing. See you. Big greetings.
Thank you my friend😊👍see you, greetings..👋👍
iki türk ingilizce konuşuyolar
efficient mini winch machine
Works great in situations that don't need help.
The little 3d printed wincher that could.
yo.... man ur jst awsm
Could you possible use a high torque motor to make the system more reliable?
@Retsetman
Awesome tourque machine. Amazed to see that those plastic gears did not break. How much watts does this machine took to pull car/water can(s) (VDC and Amps please)
Gr8 content
PLA so Hard. impresive
Eline sağlık hemşerim
I made your gearbox today at 50% size cannot wait to hook it up and add the steel and lube. Awesome design 🙂
I'm ashamed. I'M ASHAMED OF THAT ROPE BEING WEAK! Lol
God damn, that little gearbox is really strong, great job!
Cool. I need a winch for my truck
Elinize kolunuza sağlık harika bir çalışma :)
Good job i would suggest putting another motor and gear on the other side might have some even more impressive results
♡ superb ☆
Parabéns!!!!!!!!!!!!
eline sağlık
NICE IDEA . ... BRAVO .... EXCELLENT 👏👏👏👏 👍👍👍👍
Super
Eline sağlık. Güzel olmuş. Böyle şeyler yabancı ülkelerden görüyorduk. Türkiye den olunca ayrı bir sevindim. Tekrardan Eline sağlık
I think you need to add more gears 😵👍
Tebrik ederim hep yabancilari takip etmekten umudum tukeniyordu 👏👏
Just The Principal of Levers in action!
Of course these are round levers as opposed to classical levers.
If it can be like a shooting into stone(penetrate), maybe diamond or ladder material as the penetrating material, imagine a fall maybe? Because during a rock climbing, usually metal is stucked in between right, what kind of hole is needed to grasp our entire weight? I dont take risks but it is very good to know.
It's hard to believe that pla can be that strong
Power of gears
When 3d printed parts and a moter work together to go super saiyan.
Hope it can go beyond from super saiyan
You should use iron gear and shell, thicker rope, and larger tooth ratio.
Ok, now use 10 of these to pull a car uphill
I don't know which is more surprising the fact that the winch is strong enough to p.ull the car or the fact that the string is strong enough to pull the car.
That's really amazing!! Hold on...If it can pull a car which is more than 1000kg, does it mean it can pull more than 15 people at a time?😮😮😮
Tebrikler ve video kalitesi de güzel. Abone oluyorum. Sevindim.
Great job! I feel like I've seen similar thing in a power window motor? 🤔
Cause you have lol exactly the same thing lol only difference is a window motor wount work both ways without wadding up without gravity to keep it tight but the same exact gear system