1-10 Second Adjustable 5 Volt & 12 Volt Time Delay Relay

www.qualitymobilevideo.com/td...
#timedelayrelay #qmvfasttech #12vrelay
1 - 10 Second delay turn on mini relay
Circuit board design with dual LED's
Requires a minimum of 9 volts to function
Adjustable time delay turn on from 1 seconds to 10 seconds with internal potentiometer
Relay resets once power is removed
Internal Red LED to indicate power
Internal Blue LED to indicate relay has cycled
10 amp / 15 amp rated contacts
SPST - Single pole Single throw
12 Vdc rated coil with minimum 8 volt to trigger
Power consumption @ 12Vdc 40 mA
QMV TDR12V1 12 VDC SPDT 1 - 10 Seconds Adjustable On Time Delay Relay (12 volt)
QMV TDR5V1 5 VDC SPDT 1 - 10 Seconds Adjustable On Time Delay Relay (5 volt)
Unit includes: 12 volt time delay relay
QMV TDR12V1 12 VDC SPDT 1 - 10 Seconds Adjustable On Time Delay Relay
The QMV TDR12V1 is a very cool relay. Have you ever wanted to have something turn on after 1 to 10 seconds after power is applied? The TDR12V1 relay is just the relay for you. This relay is a time delay-on relay with adjustable timings allowing you to control any device. This relay is perfect for a variety of things such as delayed amplifier turn on.
Visit www.QualityMobileVideo.com for all of your car audio and video needs!
Get your QMV Merch today!
teespring.com/stores/qmv-offi...
#qualitymobilevideo #installations #caraudio
Instagram: @qualitymobilevideo
Twitter: @qualitymobilevi
Facebook: / qualitymobilevideocom-...

[@sarkarbrothers7091]

Salute to you

[@user-ke3ut9qk8p]

Thank you for your explanation, but I have a question. When I set the time, it works for me constantly, but the timer does not stop, meaning when it works for 10 seconds, for example, the ten seconds ends and it is still working, so what is the solution? Thank you in advance

[@Blakelikesfood]

Mine just showed up, I had thought it was a 4 pin relay as bought before it's picture & this video was created so unfamiliar with these. Looking to use it to turn on a 4 pin auto relay, it's trigger pin to "turn on" is pin 86 (believe 86, we'll just call it that for now).

[@hristosesteortodox1794]

Hi.Can i use this by athacing a led and the led stay on for 10 seconds for example and then automatly turn off?

[@michaelmccorkle6279]

Will this work for a pair of 12v electric fans? I want to delay the second fan for 5 sec. to avoid amp spike. Thanks.

[@1xdramakilla]

how would you wire that for a led strip to turn on

[@Automobile_lover25]

Tell me about Car dome lights fade off & on !!any video & circuit

[@jonatansoares-ti8ko]

I need one relay 12v 20A 5 second duration adjustable do you know any recommendation

[@darthbrooklyn]

I have an incoming signal that lasts 5 seconds, however i would like that to be only 1 second on the other end. Is that possible?

[@JDPlay25]

hello will that work on a car compressor clutch ?

[@hady7547]

Hello my friend, can I use it 12 volt for a car because the warm-up timer for the gasoline engine has failed?

[@supjay3945]

Wouldve been helpful to see the whole wiring diagram

[@che_tan77]

Can 12v relay work with 18.5v dc input voltage?

[@riversarcadereview385]

is this unit sold as-is or is there a kit to build it

[@TWAN330]

Will this fit 10awg wire thats feedind my amp?? Also can I power it from my extra battery in the trunk then to my amp? Thanks in advance

[@anshulgajapure426]

This circuit Can i operat 24v input

[@kaseyvaughn5963]

What about turning off

[@sahibzada1005]

Ser tel me this is adjust for 1 hour

[@FrankBuisRoyalPressAmsterdam]

is 0,2 sec exact posible

[@gwinner9236]

How do I get this product?