Kawasaki Z900 Stock Headers to Full System
Vložit
- čas přidán 7. 09. 2018
- Modified stock headers to full system by removing Muffler Chamber and adding straight pipe with proper alignment with straight link pipe. Expectation was high but BS4 stock exhaust doing great job by not allowing free flow air... but definitely louder than stock sound, happy with the sound and tension free from police fine ;)
Bro super.....you change stoke air filter TO
K and N filter power super, Sound super...coming...
Thankyou 🙂 i have changed to BMC airfilter
Awesome
hello Ash,
I was thinking of doing this exact thing to my Z, can i hear/see this in person , i can drive down. Thanks
Hey Ash World loved this new sound-and the pipe you added -is it Stainless steel or Mild steel tubing?And where you got the job done?
Hey buddy thanks for watching my video. Link pipe is customized stainless steel pipe. I got it done in Bangalore in of my know shop
@@AshWorldd Hey bud, thanks for the video. From where did you get this work done ? Can you share the details of the workshop?
Also the cost if possible.
@@aaditya2657 are you from Bangalore..?
Good one Ash bro..pls let me know where was this job done...and what was the overall cost .thanks
Hey thanks buddy :) Do you stay in Bangalore, I can help you getting this done
Did you add power commander. Is there any issues of bike running lean? Any power loss or low end power loss
Hi buddy, no power commander, nothing power loss it's absolutely normal.. for the kind of ride I do I dont require PC upgrades. In general if anybody going for track race each second is important and bike would be running continuously for 5 to 6 hours which might be getting over heat, so for these kind of rides we need power commander upgrades.
@@AshWorldd thanks a lot brother. Helps a lot. Did u keep the oxygen sensor intact?
@@MrDesperadoontheroof Yes oxygen sensor is intact!
He still remain the cat but remove the exhaust box for higher airflow. So i think this setup dont need a tune. Unless, he change to aftermarket full system system.
Is it the stock exhaust or aftermarket if aftermarket then which one ?
Its stock exhaust from Kawasaki..
hi I am confused between akrapovic and SC Exhaust Iam having z900 Can u please guide me which one to go for.
Hi buddy, SC project is slightly has higher sound note, but Akrapovic sound tone is very good and best build quality. Hey check out my latest comparison video I have uploaded. Plz subscribe and you can connect me on WhatsApp 9886532433
You will gain nothing from either of them only a headache and empty wallet
Get the scorpion full system.
Change your headers first
What if I remove the cat as well , is it going to make it even louder ?!
Hi mate, on my experience I didn't find much difference(technically 5-10% high only), but for sure poisons gas gets discharged directly to environment. So I recommend to retain the catalytic converter just remove/eliminate only muffler chamber/big bell box for sound plus for this modifications you don't need fuel remapping or ECU upgrades.
Nice bro. Is it louder than the stock exhaust setup? if so how loud bro.. KTM Duke 200 sound loud. can you please
Yes! It is louder than stock, as we have eliminated muffler Chamber so air flow is high... but stock exhaust is double link pipe inside as per BS4.... so after market exhaust will complete the superbike sound dream. Check out latest video same bike got upgraded to Arrow GP exhaust.
Bro i am really scratching my head for akra carbon or shorty please help me wch to choose best for bangalore
Are you from Bangalore?
@@AshWorldd ya
@@hykarthik ±919886532433
What the lol, I’m about to do this and save hundreds of dollars until I find a different slip on muffler. This sounds amazing with just deleting the stock cat
Hi bro.. awesome mod.. we at malaysia currently having huge cracks down on mod exhaust.. lead me to swap back to stock.. if u cud measure the db level at idle and rav at 5000 rpm maintain.. do for us a video or provide a messured figures.. will be greatly appreciated.. for z900 bike owner back in malaysia.. keep this great info 👍🏽👌
Hi Buddy, thanks for watching my video. I have chosen good quality of stainless steel mid pipe by eliminating muffler chamber/big belly box and leaving DBkiller inside the header. By doing this modification, no issues on the bike till date with good(no electronic upgrades) and decent sound out put but not that great because stock slip-on exhaust has double barrel bend pipes(to avoid back pressure/popping sound). After this modification, db level should be around 94.5/5000 rpm. Big plus point is no cops catching issue due to loud noise and we can always add after market exhaust for few rides or when required which will take 10mins to fit. Lot of people are happy with this modification.
Currently am in London(business trip), once am back to Bangalore(April 25th), will see if I can help you by making a video of it as requested.
@@AshWorldd Tqvm buddy.. awesome info.. 👌 looking forward 4 more videos 👍🏽👍🏽👍🏽
He just did this or any other modifications too ash?
Only headers we got it... May be later he might add slip on Exausht..
Ash World OK ash
bro Its been 2 years so are you facing any side effects of this modification pls tell me ... and did u got into trouble like challan for this or any loss in power of the bike
Hi Ashish, till date no issues with bike absolutely going smooth (most important depends on the usage and maintenance of bike) i have done timely service and never did any kind of stunts. Most important thing, you need to get this modification from right people who are experts/ has experience previously. No power drop otherside bike will be lose weight of 2 to 3kg.
All good till date but police definitely has objections on loud exhaust sound (these days everyone has mobile easily they will come to know the difference between stock and aftermarket exhaust), i stay in Bangalore traffic police is strict so I avoid main junction or don't rav the bike at all and max if they ask to remove exhaust, anytime i can fit stock exhaust and still can enjoy the moderate sound of the bike :)
👍👍🇮🇩
Where r u from
Hey buddy am from Bangalore
Hey bro.. im looking for the same thing.. can you point me the direction where u did diz?? And how much did it cost u???
Ping me on Instagram messenger ashhb4u
Sandels while cutting hahaha
Whose beast is this?
Haha it's Deepak owner this bike and he has a channel too GTNRIDER
What about warranty bro??
There is no warranty on exhaust once the vehicle is out from showroom. Warranty is for only Engine and electric components.
20 years from now someone is gonna say “I’d like to get my hands on the butcher that hacked up the stock exhaust for this Z900 I’m trying to restore, that’s impossible to find one now!!
Total cost?
10.5k to modify
Ash World lot cheaper than buying full system great work bro
Aap vlogging ka channel khol skte ho agr interact kro to
@@INSPIRETECHNO thanks buddy, even I felt its dam cheap and by doing this still catalytic converter is on.. in full system its completely free airflow and there will be a loud backfire sound(Plus 60k price for full system -after spending so much with in few days you will get annoying with backfire loud sound).... on my bike have very minimal backfire noise(Akrapovic exhaust)and if we keep stock exhaust(BS4) no backfire noise at all...
Ash World gud bro i am working hard to get a job and soon mai bhi z900 kharid lunga bs naukri lg jaye i am doing bsc and in last year
@@INSPIRETECHNOthats great! All the best... keep up your dreams high, one day you will achieve.... 😀
Please wear a PPE when performing the cutting of the exhaust. So dangerous OMG.
Yes Mate! Its dangerous. Definitely I will instruct the technician to take safety measures
Bhai muffler me kyu gareebi kiya? 😭😭
Hey buddy, this modification helps not only saves money but there are few other advantages like catalytic converter is still inside only muffler chamber/belly box removed so environment friendly is still on and second i can fit stock exhaust to the same link pipe when police ask to remove the loud exhaust(slip on other exhaust)... otherside full system is very expensive, it is full free flow no catalytic converter, no muffler chamber makes lot of noise and sad part when situation demands we cannot fit stock exhaust to full system(few brands)... so I felt its a smart move by utilizing the existing resource to work the way we want rather making it junk in our garage :) Thankyou
@@AshWorldd aah.. gotcha gotcha. Btw, on road kitna pada buddy?
@@rjtastic you mean bike price or full system?
@@AshWorldd the bike dude, I'm looking for a sub supersport motorcycle and i have no kawi dealership within 250km radius. I like the Z900 i dunno how to order or service if i buy it from another state.we have like a heap of bajaj ktm benelli dealerships even harley and honda big wing but no kawi. 😔
@@rjtastic hey I stay in Bangalore and till now I had good/smooth experience with service center. The price of my bike costed rs.9.70lc on road. Definitely no doubt Z900 is very good bike when compared to other competitors bike available in the market. Kindly have a test ride before make a decision of purchase. New model 2020/2021 is having lot of electronic upgrades you ll enjoy riding it.
Bike distroyed
Why did you put the shitty stock muffler back on??
These days police checking on every corner of the city abd they recognize all kind of after market exhaust. So kept the stock exhaust back to avoid hefty fine
@@AshWorldd wow really. That’s out of control.
That isnt full system bro
It's kind of full system now.. stock headers modified as full system by eliminating muffler chamber, now it fuctions equally as full system. No side effects its running absolutely fine till now
@@AshWorldd where in banglore
@@AshokKumar-us1kc Girinagara
@@AshokKumar-us1kc how about you?
Pienso que la reduccion del tubo no estubo bien perdio mucho diametro....al utilizar la salida o punta de stock tampoco se logra un buen resultado ...y finalmente no se retiro el catalizador por completo practicame te solo le quitaron peso quitando las trampas...opinion constructiva ...saludos
Hi mate, by doing this method no harm to engine, this is just eliminating muffler chamber which reduces the sound as per BS4 policy. I have used stainless steel link pipe. Now the bike sound note is awesome.
@@AshWorldd muchas gracias saludos de colombia
@@alejandrogrisales7151 Hola, eres bienvenido compañero en cualquier momento
How to destroy an exhaust for 2500$
I was thinking exactly the same. Why do people do this things? And probably someone paid for it 🤦🏻♂️
Hey Mate, this is a simple alteration I have removed muffler chamber only and added straight stainless steel pipe keeping catalytic converted. Any time we can still add back muffler chamber similar way by cutting the straight pipe.
If you are judging by looking the surrounding of the garage might look bad in shape but those are highly skilled people with cheap labour's, it costed only below $190 to make this modification rather spending money on full system which cost $2500 (Huge cost difference). Basically there is no trick or gimic showing in this video, it is purely technical way to modify to make Z to roar. Till now no damage/side effects to engine since am using my motorcycle from past 2 years after this modification. Hope you got the point
Another noisey pointless exercise