Yes modified, like eliminated the muffler chamber and added straight pipe to increase the sound. Since I have added couple of other videos on the process of modifying so I cut short the process in this video
Bro is it possible to keep the original exhaust end can intact and just remove the bread box will it increase the exhaust sound...i just want to make it slightly louder than stock....still cop friendly..lol ...????
Yes you can do... plz check out my latest video it will help you and subscribe for more videos. If you are in Bangalore then you can connect me directly I will help you with modification :)
Hi mate, thanks for watching my video. Its clean, safe and budgeted modification to make Z to roar(by eliminating muffler Chamber adding link pipe keeping catalytic converter). Only thing to be taken care by experience/skilled workers. And your query about Back fire - frankly speaking yes but minimal when compare to aftermarket headers which does not have catalytic converter and make a quite loud popout sound.
Akrapovic is best, because of its technological design for more bass sound. Sc project is just a Cann shape design, loud sound will pop out because of air out let is wide open..
Hey bro. Please can u tell me what is our bike's mileage after installing sc project with stock headers and what was your bike's mileage before??? Please reply bro
Hi mate, after installation of slip on exhaust no changes in mileage. Mileage is like 14kms city ride and long/ highway ride 18 to 19kms per liter on an average. My bike still the same and mileage always differ from rider to rider, depends upon his riding style..
I think due to catalytic converter Exist the bike should be fine but i wanna know how much there is sound difference between this Modified stock pipe and the custom headers ? And is this safer then the custom full System pipes ?
Hi mate, thanks for watching the video. 1st of all there wont be much sound difference, modified stock pipe will have catalytic converter only belly/muffler Chamber will be eliminated(which safe and there is no impact on engine or performance), incase custom/readily available full system will not have catalytic converter it's a straight pipe full free flow(backfire will be more). Secondly, quality matters modified I have chosen 1st quality of Stainless steel pipe with good gauge but these custom full systems are bad after few months of usage.... I did lot of research before doing this modification, it's safe by doing this method, am using my bike my past 1.8 years after modification of stock headers.
@@AshWorldd well thanks... im watching this particular video multiple times because its lovely you might have noticed that i have already commented before... Anyways you are kind enough to reply all the Times thanks for that And please re read the 6th and 7th line of your comment. You said there is impact on engine and performance ?? I think you forgot to add No
@@ArunSharma-yz9kq hey mate anytime 😀.. Regarding the reply on the comments am sorry mate I mean there is no issue at all till date on my bike which has undergone this modification 😀
I upgraded one by one. 1st added slip on did test ride for couple of weeks I was not satisfied, then I did customized modification to increase the sound..
@@michaelkopec.5814 yes I have eliminated Muffler Chamber and added link pipe, to make it roar. Plus I dint remove catalytic converter. You can check out my other videos
@@AshWorldd okay bro , thought of getting it done Converting to full system header doesn't provide smooth sound , I want bassy sound.. so will go for this
@@sutheeshkrishna5832Usually full system whistling sound won't come.. but there could be little whistling sound it depends on the way it was recorded action camera/phone camera, sometimes whistling sounds comes
It's been 1.9 years since I got this done.. I dint get caught once 😀 becz I never rev in traffic or main junction or police usual stop over.. I always try to keep up low RPM with higher gear on such places.. 😀😀
Not really required... until we ride these machines continuously for more than 8- 9hrs and every day ride.. then Engine gets over heat and valves get burnt plus fuel consumption might be more to avoid this ECU remapping required. We hardly ride so not required at this stage even Kawasaki service center confirmed not required
Bro i stay in Bangalore near vega city mall ... jaynagar please be there to help me when i need any help regarding the information of the bike and exhaust
@@santhoshm3798by eliminating muffler chamber it will make loud noise and would suggest go for Akrapovic Shorty exhaust which is best in technology and sound plus if you feel it's too loud you can fit DBkiller to reduce the sound.
Our main movitive behind this modification is to make this bike to roar /make loud noise so removed onlyģ Muffler belly chamber, and I insisted to keep the cat con, to continue to do is jobs
Individual choice! My choice after seeing few brands (SC, Arrow, AR, Scorpion, twobrothers) Akrapovic is the best, so I opted for it.. stylish and sound is also 👌great
This modification total costed including material, welding labour cost and mechanic cost = rs. 12.5k I paid.. Slip on exhaust depends on current market price.. Akrapovic shorty costed 62k, SC project crt costed 55k rupees. Check out the below link for Arrow slip on exhaust vs Akrapovic shorty exhaust with similar modification (converter stock headers to full system, no issues till date) czcams.com/video/7TmJAroSTSU/video.html
Either it's a click bait or the shop owner fooled you. Full system sc project exhaust is not 51k its well above a lakh. This is just the end can replacment with baffle which should cost not more than 20k rupees. You got cheated most likely.
Hey mate, I have mentioned the price 51k only for slip-on exhaust..plus converting stock headers to full system spent 12 to 13k in total its around 64k
Great video bro! My dream bike! 😃
Awesome exhaust
Cool. Waiting for my turn next time I visit u ash.
I think this modification is good for the bike and budget friendly
Nice
stock 1:21
modified 2:09
Yes modified, like eliminated the muffler chamber and added straight pipe to increase the sound. Since I have added couple of other videos on the process of modifying so I cut short the process in this video
hai bro its seems to good and budget frndly i wish to do it for me also even i use the same slip on sc project
🙂🙂👍 yes it is
Bro is it possible to keep the original exhaust end can intact and just remove the bread box will it increase the exhaust sound...i just want to make it slightly louder than stock....still cop friendly..lol ...????
Yes you can do... plz check out my latest video it will help you and subscribe for more videos. If you are in Bangalore then you can connect me directly I will help you with modification :)
Wow
Bro I stay in bangalore
I think it is very affordable to make this type of exhaust compared to buying the full sustem cost more tha 1 lak .
you inspiring for doing the same, thank you so much, do you have some back fire ?
Hi mate, thanks for watching my video. Its clean, safe and budgeted modification to make Z to roar(by eliminating muffler Chamber adding link pipe keeping catalytic converter). Only thing to be taken care by experience/skilled workers.
And your query about Back fire - frankly speaking yes but minimal when compare to aftermarket headers which does not have catalytic converter and make a quite loud popout sound.
which track bro ?
Good thing you left the catalysts intact. Hardly any popping.
Yes, that the reason I kept going with cat con 😃... Not too loud but definitely makes presence of superbike plus not that much harmful to environment
I think I’ll do the same.. Cut just the breadbox with the cat intact.
@@eshwarriorthat's cool! if you are in Bangalore I can help in this transformation.
No mate. I’m from Vizag. :|
@@eshwarrior ho ok! You can keep in touch on whatzapp 9886532433
What is the difference between sc project exhaust and akrapovic exhaust
Akrapovic is best, because of its technological design for more bass sound. Sc project is just a Cann shape design, loud sound will pop out because of air out let is wide open..
Hey bro. Please can u tell me what is our bike's mileage after installing sc project with stock headers and what was your bike's mileage before??? Please reply bro
Hi mate, after installation of slip on exhaust no changes in mileage. Mileage is like 14kms city ride and long/ highway ride 18 to 19kms per liter on an average. My bike still the same and mileage always differ from rider to rider, depends upon his riding style..
Is it louder than benelli 600i ixil ?
Yes it is
Aayush Kumre 10 times louder bro
10time louder are you serious bro coz with that level if sound i dont think so
What's the mileage with stock exhaust and after installation of SC (without belly chamber)
No difference in mileage, city 12 to 14 and highway 18 to 20... These figures varies from rider to rider
@@AshWorldd Ty for rplyng
@@sagarbane750 Anytime
These modification do not affect the engine?
I have checked all the technical aspects before finalizing this kind of modification, so nothing happened till date, all good!
I think due to catalytic converter
Exist the bike should be fine but i wanna know how much there is sound difference between this Modified stock pipe and the custom headers ?
And is this safer then the custom full System pipes ?
Hi mate, thanks for watching the video. 1st of all there wont be much sound difference, modified stock pipe will have catalytic converter only belly/muffler Chamber will be eliminated(which safe and there is no impact on engine or performance), incase custom/readily available full system will not have catalytic converter it's a straight pipe full free flow(backfire will be more). Secondly, quality matters modified I have chosen 1st quality of Stainless steel pipe with good gauge but these custom full systems are bad after few months of usage.... I did lot of research before doing this modification, it's safe by doing this method, am using my bike my past 1.8 years after modification of stock headers.
@@AshWorldd well thanks... im watching this particular video multiple times because its lovely you might have noticed that i have already commented before... Anyways you are kind enough to reply all the Times thanks for that
And please re read the 6th and 7th line of your comment. You said there is impact on engine and performance ?? I think you forgot to add No
@@ArunSharma-yz9kq hey mate anytime 😀..
Regarding the reply on the comments am sorry mate I mean there is no issue at all till date on my bike which has undergone this modification 😀
@@AshWorldd 💙 Bro you have got a text on WhatsApp !
Bro did you install slipon then decated it or ?
Did you install full System and removed the cat ? Or the cat is still exist ?
I upgraded one by one. 1st added slip on did test ride for couple of weeks I was not satisfied, then I did customized modification to increase the sound..
Ash World How loud is the sound of slip-on bro??
@@AshWorldd what do you mean by "customized modification" ? you removed cat con ?
Thanks
@@michaelkopec.5814 yes I have eliminated Muffler Chamber and added link pipe, to make it roar. Plus I dint remove catalytic converter. You can check out my other videos
heyy.......where you made it..???
Hey if you are in Bangalore, I can help you getting modified
@@AshWorldd where in Bangalore
Bro I am in Bangalore I want this silencer for my pulsar 220 please help me
Did you remove the catalytic converter inside the pipe?
Hi Mate, removed only muffler chamber(big belly box) and catalytic converter still inside header pipe
@@AshWorldd okay bro , thought of getting it done
Converting to full system header doesn't provide smooth sound , I want bassy sound.. so will go for this
Do you stay in Bangalore? If yes where
@@AshWorldd my native is Mumbai , but currently for job purpose I'm in Chennai
@@arunbhadriwal7765 oh ok! After pandemic situation gets over you can come to Bangalore I can help getting this modification properly....
Sc project crt or racefit which is more loud
SC project CRT model is loudest exhaust (with the full system)
In some videos sc project crt full system makes whistling sound why .can it be changed
@@sutheeshkrishna5832Usually full system whistling sound won't come.. but there could be little whistling sound it depends on the way it was recorded action camera/phone camera, sometimes whistling sounds comes
Apne konsa lagaya he exhaust
Finally opted for Akrapovic Shorty 😀
@@AshWorldd wooo 🤘🤘
Do you get caught by the cops for the sound? Is it replica or original slip on?
It's been 1.9 years since I got this done.. I dint get caught once 😀 becz I never rev in traffic or main junction or police usual stop over.. I always try to keep up low RPM with higher gear on such places.. 😀😀
@@AshWorldd honestly I enjoy these exhaust on low rpms and even start ups....always gives me the Goosebumps..
@@andaman85 its original Exhaust bought it from authorized dealer in Bangalore
Would it be louder without cat??
It's almost same, may be slightly higher note... this is sufficient which is making lot of noice
@@AshWorldd which would be the loudest exhaust for this bike??
Totel prize?, with silp on
Slip on SC project exhaust CRT costed 55k and modification 12k = 67k total
Ecu remap kra iske baad?
Not really required... until we ride these machines continuously for more than 8- 9hrs and every day ride.. then Engine gets over heat and valves get burnt plus fuel consumption might be more to avoid this ECU remapping required. We hardly ride so not required at this stage even Kawasaki service center confirmed not required
Ash World but eliminating muffler must void warranty of the bike?
@@INSPIRETECHNO both the bikes completed a year... it doesn't matters now we need to be more responsible while riding need to avoid drag race :)
Bro i stay in Bangalore near vega city mall ... jaynagar please be there to help me when i need any help regarding the information of the bike and exhaust
Which bike do you have?
@@AshWorldd as of now Rc 390 and soon will be upgrading for a litre class bike !
Will surely Contact you as soon as i buy one
@@ArunSharma-yz9kq 👍
Bro how loud is it with the cat????
Slightly higher sound note when compared to eliminating muffler Chamber only
Sir what's the cost of exhaust and full process?
Hey buddy for SC project CRT costed 52k and modification costed 12k
Ash World what type of modification exhaust modification or bike modification
@@Syedxayaan eliminating Muffler Chamber from stock headers adding link straight pipe.. that's the modification done.
Mbro can you tell me pls decat exhaust system needs tuning or remapping
Not required until unless you going for drag race
@@AshWorldd bro slipon make sound loud or decat bro for z900 which best in austin racing slipon or decat
Pls tell me bro
@@santhoshm3798by eliminating muffler chamber it will make loud noise and would suggest go for Akrapovic Shorty exhaust which is best in technology and sound plus if you feel it's too loud you can fit DBkiller to reduce the sound.
@@AshWorldd thanks for rply bro akrapovic slipon only bro
Bhai kaha se ho aap
Hi buddy, mein Bangalore se
Why didn’t you gut the cat?
Our main movitive behind this modification is to make this bike to roar /make loud noise so removed onlyģ Muffler belly chamber, and I insisted to keep the cat con, to continue to do is jobs
Hey bro. How much time this process took???
It takes around 3 to 4 hours max
Ash World And what will happen if we take out the catalytic converter???
@@akhileshbhosale3218 can increase noise decimals plus direct air pollution...
Ash World well I was trying to take out the catalytic converter. Should I do so???
@@akhileshbhosale3218 hey mate I suggest just eliminate muffler Chamber(big belly Chamber), don't remove catalytic converter. Are you in Bangalore?
Arrow or akrapovic?
Individual choice! My choice after seeing few brands (SC, Arrow, AR, Scorpion, twobrothers) Akrapovic is the best, so I opted for it.. stylish and sound is also 👌great
What is the total cost of modification?
Hi mate, I paid rs.11k
Pls tell cost of slip on and cost of the pipe u used and and for the mechanics .what is the total cost
Arrow exhaust can produce this much sound?
Can i do with arrow exhaust what you did with sc project
This modification total costed including material, welding labour cost and mechanic cost = rs. 12.5k I paid.. Slip on exhaust depends on current market price.. Akrapovic shorty costed 62k, SC project crt costed 55k rupees.
Check out the below link for Arrow slip on exhaust vs Akrapovic shorty exhaust with similar modification (converter stock headers to full system, no issues till date)
czcams.com/video/7TmJAroSTSU/video.html
Is the sc a replica ?
Hey Mate, it's original SC Project CRT bought for 51k.rs in Bangalore
Bro you live in Kolkata ?
Please provide me any means to contact you, I too have a z900, I need your help
Hi buddy, I stay in Bangalore oftenly I visit Kolkata on office work. But you can connect me on WhatsApp 9886532433
How much cost?
12k. rs
@@AshWorldd lekin slip on exhaust ka price to 50 thousands
@@Z900SMBiker that is for modification of header. Slip on Sc project exhaust cost 55k
@@AshWorldd ok. Thanks
Cost?
Hey buddy do you stay in Bangalore?
Yeah, near Whitefield.
Bhai paise kitne hote ye Dale to
Bhai ye Jo SC project CRT model hai 51k rupees
Either it's a click bait or the shop owner fooled you. Full system sc project exhaust is not 51k its well above a lakh. This is just the end can replacment with baffle which should cost not more than 20k rupees. You got cheated most likely.
Hey mate, I have mentioned the price 51k only for slip-on exhaust..plus converting stock headers to full system spent 12 to 13k in total its around 64k
@@AshWorldd then cool
@@SJ-qs2gj thanks buddy 😀