Any MOT testers watching…if I replace my xenon projectors with these, will I fail the MOT? I know it should technically, but is any tester likely to notice it without splitting the headlight?
I saw rubber spacers on the movie. How long they are? Is there any difference between them in lenght? I'm asking because I'm not sure if the bulb position would be correct or some position adjustment is needed?
My headlight projector lens is broken and i need it fixed for the inspection, i have a spare halogen headlight, is it possible to out the projector assembly into the halogen casing?
Hello! How do you achieve correct HID bowl position after the swap? It have to be aligned with high beams and cornering lights. Is there any measurement to keep? (HID plane defined by nuts on bolts. But how many turns each when normally those are spring-loaded)
The position is kept the same as the original (ok, maybe there will be differences of 0,1 mm). And the spacers are used for the distance from the front. And that distance is also not very important, as long as it's the same across the mounting points so it doesn't 'tilt' and by using the same spacers, it is kept the same.
@@Retrofitlab I bought the kit. I'm waiting for it to arrive. but still I don't understand how you can increase the light by moving the headlight 10mm backwards? I just think that the light is concentrated more centrally and is lost laterally? I'm right?
Hi. I'm looking to add a second projector (quad) to my car and i would like to know which projector gives the most color/or can be color modded the most? At one point i was actually thinking about the Profile Bi-LED. What do you recommend?
Recomend this kit, major diffrence in light output... tough wish there was a few spare screws and rubber spacers for clumsy big hands
Thanks for the feedback! :-)
Ich hab mir ja sowas für mein audi bestellt ich hoffe das es passt wenn es geliefert wird
Any MOT testers watching…if I replace my xenon projectors with these, will I fail the MOT? I know it should technically, but is any tester likely to notice it without splitting the headlight?
Please ford fiesta 2005-2008. Thanks
Does the shutter bixenon Works With this retrofit?doesnt See Switch the Black cable AT the end
Retrofitlab OK Thank a lot,i See the connector AT 2:52 :)
Is it possible to change the reflector and clean lens in Kuga MK2 2014?
Probably is, but we don't have any info or experience on the Kuga, sorry!
@@Retrofitlab Thanks for your reply
I saw rubber spacers on the movie. How long they are? Is there any difference between them in lenght? I'm asking because I'm not sure if the bulb position would be correct or some position adjustment is needed?
We used 10mm spacers :)
My headlight projector lens is broken and i need it fixed for the inspection, i have a spare halogen headlight, is it possible to out the projector assembly into the halogen casing?
Sorry, this is not possible :(
Hello! How do you achieve correct HID bowl position after the swap? It have to be aligned with high beams and cornering lights. Is there any measurement to keep? (HID plane defined by nuts on bolts. But how many turns each when normally those are spring-loaded)
The position is kept the same as the original (ok, maybe there will be differences of 0,1 mm). And the spacers are used for the distance from the front. And that distance is also not very important, as long as it's the same across the mounting points so it doesn't 'tilt' and by using the same spacers, it is kept the same.
hi, with this modification, are there any problems when you do the annual vehicle inspection?
Hello, that is not a problem. This kit needs to be modified to be mounted in the headlight.
@@Retrofitlab I bought the kit. I'm waiting for it to arrive. but still I don't understand how you can increase the light by moving the headlight 10mm backwards? I just think that the light is concentrated more centrally and is lost laterally? I'm right?
Hi there! May i know what inches are the original projector
2,5 inch ;)
Hi. I'm looking to add a second projector (quad) to my car and i would like to know which projector gives the most color/or can be color modded the most? At one point i was actually thinking about the Profile Bi-LED. What do you recommend?
Thanks
Opl
Hi, I've got a focus st mk2 2007 PFL.
Do you do lens for this? UK RHD fitment?
Hi Daniel, please send us an email to info@retrofitlab.com so we can give you proper advice on the right kit for your car.
The preparing for the holes is it left or right of headlight the same?
Both are same