Tire explosion HACK! Fixed bead with fire

Sometimes you have to be explosively creative with how you get a tyre back on its bead.
We drowned the Iveco and had no access to the air compressor.
This is the full-length version of video: • Inflate Tyre with Fire...

[@kingtucky4300]

When you already burned off your hair in previous attempts.

[@cowboy9257]

Hilarious

[@MasterNick7412]

"oh shoot I didn't get it on camera, do it again!"

[@codyswilley]

Kick the tire when it dont pop up on the bead. Works every time

[@pixelxl1052]

что это значит?

[@6ix13ree]

U had one job and u missed the action 😅

[@didge110]

everytime, eh?!

[@jordanlang5275]

THIS WAS NUTS! how did simon not lose an eyebrow

[@stoundingresults]

You can also spray starter fluid on a tire rod or in your case that stick near your feet, light that to get the makeshift torch to the tire. It makes for a more controlled explosion. And if you can't get it to sit give it a kick to get it to adjust as lt explodes. I have left air hoses of pumps attached to valves on while lighting the tire. Have a spray bottle of window cleaner or something non flamable to extinguish flames getting to where they're not supposed to.

[@dexterjsullen]

and thats why i always keep a 12v compressor

[@Zoroaster4]

Yeah but unless it's like a massive air burst I don't think it will reset the bead. I've seen a video with a giant blaster that dumps a 3 gallon air tank all at once and even that doesn't work sometimes. IDK maybe it's easier with the bead partially set, but I think I'm gonna keep a can of starting fluid just in case.

[@relinquishedforever8505]

I laughed so fucking hard when he used it as a flamethrower

[@joehighsmith2951]

Need supplied air in the valve stem when this is done to keep the beads seated. Once the tire is blown up on the bead, once it cools it will collapse and pop back off the bead

[@tonyhunter3759]

You can clearly see why he don’t have any hair 😮😂

[@avinashsuval]

😂😅

[@johnwatson-sw2ql]

🔥 the cameraman 😮

[@howardkeil1526]

Once it doesn't go you have to air out the tire to get all the burnt gases out of it it needs to have fresh oxygen and about a 2-second burst is all

[@rsz90182]

You should have kicked the tire to get oxygen inside. Then you will see if you want to recommend it.

[@josephbauer1513]

Please express the people how deadly this can be yes it works but it's a fine line between good job and good night

[@lalremsiamaralte1831]

The camera man got one job😭

[@mrshinybald2739]

I dont know what im doing thats why im here

[@oliverjantz1108]

Wow I’ve done this a lot and this guy definitely needs training!!!!
He’s gonna lose his hand if he keeps using an aerosol can as a torch

[@howardkeil1526]

I do that you won't burn your hand if you're not an idiot. And once it does not work you have to air out the tire before attempting again.

[@vinceandal7161]

can u use any flammable liquid?

[@justinwilliams9228]

Thank you. I’m definitely not doing that now

[@joeyc6398]

Right Said Fred is quite handy...😮😅

[@Beatrixkiddo318]

Dude just kept spraying

[@DevinMcSalty]

Think you sprayed enough aerosol?🤦‍♂️

[@Whyusadd]

Pre shaved your head for the fire 😂

[@MrSmoker2003]

What a joker don't do this unless you know what your doing then proceeds to show he ain't got a clue

[@reallauradee]

You had one job to do and that was to keep the camera steady.

[@93_Corvette]

1,700th person to like the video! 👍😁

[@drone_crazy]

When you did this did you remove the valve core and if you did did it do any damage to it

[@happydays2190]

Sounds like it flew off, something definitely flew off

[@krz9487]

And the chemicals disintegrate the rubber and makes the tire no good

[@daMillenialTrucker]

FALSE

[@krz9487]

@@daMillenialTrucker So the extreme heat wouldn’t get the steel belts hot and melt the nylon ? And destroy the casing. It’s a quick fix but not proper. I grew up in a Tire shop and I put 54 hours a week mounting tires and I’ve never once done this .I’ve changed many guys ruined doing this

[@happydays2190]

​@@krz9487its only for a split second, just like you can put your hand through a flame quickly and not get burnt, why lie? I could see the valve coming off under the pressure though

[@howardkeil1526]

I think you're on chemicals they don't hurt it.

[@rsz90182]

I think the valve stem is stuck inside that fat dudes eye or throat!!!

[@101-reaganb2]

Bro you clearly don’t know what you’re doing. You put waaaay to much spray in there and you don’t use the spray as a flamethrower either bud 🤦‍♂️

[@mrsavagemans]

It works just fine the way he did it

[@TrapStar14mill]

That’s a big ass truck . Tf y’all driving ?

[@patrikolas]

It explane why he is bald

[@lifeofdestiny1422]

What spray did you use?

[@daMillenialTrucker]

Destiny you damn well know you ain't about to try and do this 😂😂

[@connordegeer6162]

Carb cleaner, or starting fluid works

[@OgOssman]

Wayyyyy too much. Haven't seen whole thing yet but too much. Bro.

[@jimmypadua1084]

Camera man 0/10

[@brentmcd12]

hahaha 😎🤙

[@psychokiller9824]

I do not recommend this technique cuz its stupid and perilous

[@georgeblackstock2386]

Thumbs down

[@gabrielcazarim]

The explanation
czcams.com/video/63RAFk1Ae84/video.html

[@14bqdonk]

noob camera man, not recording the important part

[@Subscribe_to_ryth_or_pass_away]

L camraman