THE NEW MTB IS ... ABSOLUTELY NUTS! KENEVO S2 2.2 700 BATTERY! ABSOLUTE RIG! DH TRACKS & BIKE PARK RUNS ARE GOING TO BE MAD! ANY RIDING MTB LOCATIONS LEMME KNOW! HARRY MAIN! OWNA - OWNAOFFCIAL.COM
Your front brake mount has been mounted upside down. Flip is around and remove the washer. You can see your pads haven’t been biting the disc fully, only half way.
It looks more like the wrong adapter. I think he’s used a 40mm adapter from his old fork and those Fox 38s only need a 20mm. Either way it’s dangerous and needs sorting.
Highlight this point @Harry Main - those DGrips didn't look on far enough based on where the Burgies got to. I've learnt hard way with DGs when not putting on far enough and bar end snapping in the grip...mallet them on!!!
Make sure you bang on dmr grips with rubber mallet they dont seat all the way unless you hammer them on otherwise your handlebars will feel longer as i found
I bought a 2nd hand bike with DMR grips and was it riding home when the grip suddenly snapped ( i actually thought it was the handlebars and i sent the seller a nasty msg ) when i got home i took the grip off and it was hanging about 3 inches over the end of the bars. if i was sending it down a hill it could of been bad
Great to see the upgrades and maintenance. Your front brake pads shouldn't have worn like that something not right with adapter. Pads should wear all over evenly otherwise you won't be getting full power.
Would recommend Delamere Park, it has a huge bike trail system me and my mates go get there for about 11 and don’t leave until dark or our bikes die 100% recommend
it looks like your front caliper spaced out too far, those old pads are worn in a way that shows you are not making full contact with the rotor, maybe the adapter is on wrong?
I love your content, used to watch all the bmx content, you used to have this metal flake black frame in 2016ish I loved. Was wondering if I could make a sick bmw inspired coffee table for you free of charge of course. I have my own custom metal fab shop in Scotland and have some nice ideas!
You will fry the SRAM drivetrain on the E in no time and the clicks and clacks will be back. Once the cassette goes again make the switch to 11spd Linkglide shimano HG driver. A lot cheaper and easily lasts 200% + longer ⚡️⚡️🚀
Your front brake mount has been mounted upside down. Flip is around and remove the washer. You can see your pads haven’t been biting the disc fully, only half way.
I was about to comment this
It looks more like the wrong adapter. I think he’s used a 40mm adapter from his old fork and those Fox 38s only need a 20mm. Either way it’s dangerous and needs sorting.
OMG, the pads are barely hitting the disc. PLEASE use the correct adapter and make sure it is mounted the correct way 👍🏻
This 100%
Defo need to sort this 😮
You should put a new chain on when you change the cassette. As the old chain maybe stretched
Make sure to smash the deathgrips on properly, the tube inside is tapered so it grips the bar as well as the clamp
Highlight this point @Harry Main - those DGrips didn't look on far enough based on where the Burgies got to. I've learnt hard way with DGs when not putting on far enough and bar end snapping in the grip...mallet them on!!!
Make sure you bang on dmr grips with rubber mallet they dont seat all the way unless you hammer them on otherwise your handlebars will feel longer as i found
i had this same issue. such good grips though when they are on there
I’ve just ordered some, very helpful
I bought a 2nd hand bike with DMR grips and was it riding home when the grip suddenly snapped ( i actually thought it was the handlebars and i sent the seller a nasty msg ) when i got home i took the grip off and it was hanging about 3 inches over the end of the bars. if i was sending it down a hill it could of been bad
Great to see the upgrades and maintenance. Your front brake pads shouldn't have worn like that something not right with adapter. Pads should wear all over evenly otherwise you won't be getting full power.
When are we going to see a jump bike added to garage ? Loved watching your old backyard North shore builds with you chameleon
Would love to see you at farmer johns again, and pimbo opening weekend.
9:30 Just a tip... push the pistons back before you take out the worn pads, less chance of damaging the new ones that way.
Harry back with more E-bike content to brighten up my nightshift!!! That's some savage scrape on the frame dude.
Nice maintenance video mate .
hi Harry realy like the blog love the tech off you thank you very much
Would recommend Delamere Park, it has a huge bike trail system me and my mates go get there for about 11 and don’t leave until dark or our bikes die 100% recommend
it looks like your front caliper spaced out too far, those old pads are worn in a way that shows you are not making full contact with the rotor, maybe the adapter is on wrong?
That was snaffled that Tool Harry. You well raided my tool box when I wasn't looking
BTW that was a joke before the CZcams police think I was calling Harry a tea leaf
U need hook that bad boy up with a Bluetooth rear mech. Second to none shifting 👌🏼
You should come over here to ireland we have some crazy trails one i go too is where oisin O'Callaghan rides
Next time you buy pads try the galfer purple pads, they’re a huge upgrade on the standard sram pads
I love your content, used to watch all the bmx content, you used to have this metal flake black frame in 2016ish I loved. Was wondering if I could make a sick bmw inspired coffee table for you free of charge of course. I have my own custom metal fab shop in Scotland and have some nice ideas!
Great video I am car valeted how many of stuff do you have 😂😂
So did you check out that trail I told you about Speyside and also have you done tarland?
Top vid mate, i use nothig but deathgrips mete those exact ones sent you an email btw dude
You will fry the SRAM drivetrain on the E in no time and the clicks and clacks will be back. Once the cassette goes again make the switch to 11spd Linkglide shimano HG driver. A lot cheaper and easily lasts 200% + longer ⚡️⚡️🚀
We all been guilty at some point of ditching the bike dirty to get on a plane or two haha. Cost me a few chains let me tell ya
It’s probably already been answered somewhere but why Did Harry delete all of the og bmx vids? Glad to see he’s still doing good ❤️
Did you get a new chainring
Correct me if im wrong but shouldn't you swap to a new rotor if you change pad compounds?
Do you find those grips better than the Burgtec ones?Im just curios of they better.Using Burgtec 2 years now and i rly like them
It looks like you bought the old version of the 12speed cassette
Yo ..the shipping to germany is 20€..makes it hard to get that fire hoodie 😅
Harry do you have a spotify public playlist? Please share lad!
Your front pads looked like they weren't positioned properly looking at the wear on them...And DMR grips all the way..Ha!
Get galfer purple pads
I don’t know, I feel like you run your brakes the right way…
Llandegla good in north wales