YOSE POWER--rear motor with cassette freewheel installation
Vložit
- čas přidán 23. 06. 2019
- dear all, this is YOSE POWER rear motor with cassette freewheel instalaltion video, hope this video can help you to install your e-bike more effective and smooth.
I have a 350watt 36v yose power kit i fitted to my roadbike. Its great! Ive done 5300 miles in the past 12 months commuting to work and back. Its saved me over £1300 in fuel 👍
Thank you for support of YOSE POWER!
But how much did you pay for the electricy? You needed to charged with something, right?
@@kevinorghidan4384 I think it will save much money than other transportation, and it will be more environmentally friendly.
@@YOSEPOWER I know, I'm trying to calculate the fuel and the energy, like how much does a fuel cost that you can ride 50 km, and how much does the electricity cost to charge the battery for you to ride the same 50 km. From my calculations, maybe I'm wrong, I sae that it's more cheaper to go with electric. I really love the electric bikes, I'm go a buy a wheel 1500w 48v after my birthday, I hope o will get to 65 km/h, even tho I will only ride with 25 km/h in the city, and when going far from city I will ride faster. I love this technology, and the power it has. Imagine if "we" build an electric airplane. Imagine the speed of it. And better for the environment.
Just installed rear wheel 350w yose power kit bought from eBay on my mountain bike. I looked at buying a ready made ebike but they were £800+ and I already have a nice bike that I like... Hence buying the yose power kit for £340. It's a lot of money to invest in a kit for me but I tested it on the road/trail yesterday and I LOVE IT. It makes riding so easy with the pedal assist even on eco level so would be perfect for commuting/general travelling. Just using the throttle without peddling it can get up to speed easily! 15-20mph is easily enough for me.
In terms of installation I'm an amateur and still managed it quite easily. Great how yose also supply tools with the kit for removing the cassette/pedal arm and the chain. You will need some torx bits for removing the brake discs however. Connecting the battery holder to the frame is the only issue as the holes didn't line up with my frame bolts and I didn't want to drill my alloy frame. As others have mentioned the clip for the LCD display is weak at best and also not big enough to wrap around my thick handlebar. (Cable ties helped again!) If yose power could improve on these two things in future the kit would be perfect. I've used one bolt and heavy duty cable ties to secure it. As my frame is small (16") the battery and triangle wire bag just fit exactly into the frame space meaning I won't be removing the battery for charging anyway so I'll charge while on the bike. No problem. I haven't used the brake levers supplied because I have hydraulic brakes... I wonder if there is a motor cutoff sensor that could be added to existing levers in future... That would be great.
Overall I'm really happy with the kit so far and I've read good things about longevity of these systems so I hope it continues to operate well for years to come!
Thanks for your support.
Already Installed 4 Kits. Performence and Handling are really great. By far the best Buy I know. 250Watt Front Motor is great for Cargo Bikes and Cruiser. 350Watt Rear is great for Speed Bikes.
Only wish from my side: I could not find a shop were I can by the KT 4 Display mounting bracket. The bracket is not very solid and can break very easily - which is pretty bad because I would by 10 if I could. Thank you!
thank you for your support of YOSE POWER! we will take your suggestions prepare more KT display in our shop!
YOSE POWER ist am bestens mit elektronischen Geräten Danke einfach Supppppper 🥰
Salam alaykom wach mjarbo mezyan!!!
@@yassineahmouda5370 نعم جديد جدا 💥
I thought the controller was part of the battery in a Yose Power conversion kit, one of the main reasons to purchase Yose simplicity installs? Is this an early version or a change?
Hello, there is a controller in this kit. If you buy a battery separately, then the controller needs to be purchased additionally.
Wenn ein Mann was kann dann ist es einfach 1000 % einfach richtig gut und man spart viel Geld probier es aus
Wir hoffen, Kunden dabei zu helfen, unsere Produkte einfacher zu installieren.
good
I have this kit buyed and i am very satisfied. I will buy more to convert also many mtb´s. I will put some videos with diy and trips.
thank you for support of YOSE POWER!
Hi if you not use the motor it can feel if you just pedaling harder to pedal?
In the box send a pair of break if i have oil break can i use the system without the sended pair break?
And whiteout the pedal assist also work the motor if i don't want to add the bike?
Hello,
You can't get boost if you don't use a motor.
if you are using the oil brake, you need to buy the oil brake sensor separately.
I'm not sure where you're going to use the motor, we still recommend it on the bike
Would be good to get the instruction manual detailing the settings required for the P settings and the C settings for your 350 watt rear hubs Just a link would do 🙂
Thank you for your suggestion. This is an old installation instruction. We have improved it and will continue to improve it.
Ja the Pas Sensor cable KT D12?
Hello. Does your motor support a 135mm dropout?
Or does the bike in your video have a 135mm dropout?
Our motor is 138mm, If your bike dropout still have some space, maybe it can install
@@YOSEPOWERMy framedropout is 150 mm ,i need a longer axel ,support please.
Hi, Im looking to buy 28 inch rear wheel with 350 watts Motor, my question is what are dimensions of the Rim I mean especially what width and height?
Is there any drag from the motor when the electric system is switched off, i.e. riding under your own effort only?
Yes, you can ride under your own power if the motor is off.
Just unboxed mine. No chain wrench , spanner or screwdriver . Great.
Hello, you can contact our after-sales customer service, they will help you solve this problem
Can I use this set without the Thumb Throttle only using the PAS sensor?
Yes, you can use this set without the Thumb Throttle.
Did anyone install this on a trek dual sport 1?
I have that peddle sensor but it’s to small to fit the crank, do you do a larger one?
We have different sensors on our website, you can find it if there is what you need.
@@YOSEPOWER I have the same problem, but I don't find the different types of PAS SENSOR on your website, could you sens me the link ?
@@jeromeakf You can try to contact the after-sales service, they will recommend a suitable sensor for you.
is it possible to put a 12 speed cassette in the hub of the motor wheel?
Sorry, cannot be installed for 12 speed cassette
I've just installed this kit, and as shown in the video above, it was very straightforward... Except the motor hub does not fit into the dropouts! The diagram on Amazon shows the width of the motor hub as 135 mm. My dropouts are 135 too. But I discovered that the hub has two protruding nuts, plus the lugged washer, which take the width closer to 145. I managed to insert the hub in the end, but the washers are outside the forks! What can I do?
Also, the bike shows some resistance when you walk beside it and push. Is that normal?
Apart from that, it works well and is very fast.
I have the same issue, how are you getting on with the set up?
@@andrewgardner6860 An update: A German customer, in a review on Yose Power’s website, said he had to pay the local bike shop 40 euros to widen his forks so the motor hub would fit. I tried to do the same thing using a car jack but the forks just snapped back into place.
I watched as many youtube videos as I could find which showed the rear motor hub heing inserted into the forks. Most of them put the washers on the outside, not the inside. Some advised strongly to do it this way. See for example the video czcams.com/video/dh65XAgvrkU/video.html, from about 6:30 onwards.
Anyway, in the end I put the washers outside the forks.
Yose Power were very responsive when I contacted them through their website, but made the point that there would be many more complaints if other customers had the same problem as I. In the end, they suggested putting slimmer washers in.
Lots of people who were doing conversions advise using a torque bar, which is what I am going to do. It’s on order, and should provide the extra safety which the kit needs.
I also had the same problem with the width of the hub.
If you have an aluminum frame you can't widen them, they will break, you can cold forge steel.
I had new spacers made at a machine shop, fits snug now and working well.
hearing this far to much.put me off buying now :( who wants a wheel that doesnt fit?
Tengo problemas con el kit
Me da el error 24, y no marca la velocidad
what problem can i have with error 09?
Do the kit come with a lock nut for Cassette hub???please help???what if my old bike wheel Cassette hub lock nut don't fit?????please help
I suggest you send a picture explaining the accessories you need to this Email service@yosepower.com
Hi guys, 36v 8.7AH is fit to this kit.? It can run the motor? Help!!!
Hello, we have several kits suitable for 36V batteries, you can find what you need on our website: www.yosepower.com
Which freewheel do you need?
I thought this was a cassette (Free Hub) watching the video, not a Freewheel (screw on style)?
Where can I purchase this kit for my 26/1.95 bike
please click: www.yosepower.com to find more products
Hi is the battery pre-charged?
When you receive the battery, there is some charge in the battery, but not 100%
How to order this?
Hello i need a longer axel for 150 mm frame ,can you delivery ?
I suggest you contact our pre-sales service, you can send us the product and shipping address, we will help you to complete the order.
Just try to install diskbrake on a 350w rear hub motor but orginal 6 bolt disk brake does not match with yose power hub.
No disk brake to be found that will fit the wheel
Hello, you can try to contact our after-sales service.
@@YOSEPOWER how do i get in contact because i dont get an answer when i sent email
@@damiandegroot2457 May I ask which platform did you place the order on? Maybe you can also send me your order number and email.
Can anybody recommend s specific cassette for this Kit ?
Hello, you can contact our service E-Mail, they will help you choose products. service@yosepower.com
Moin, für Fahrten in den Bergen wäre eine Retarder - Bremse sinnvolle. Hat jemand Kenntnis von Hard- und Software, die zum Nachrüsten der YP 350 taugen? Denn ich würde gern die mechanischen Bremsen entlasten. Die Rückspeisung des Bremsstromes verlängert ja bekanntlich die Reichweite. Gern experimentiere ich mit.
Hello, I suggest you send some pictures to the service email on our official website, and we will help you choose the right product.
Hello,
I have an error 09 on my 350W -36V-12,5AH, can you pleae help me to solve this issue. Best regard.
Hello, you can contact our after-sales service, they will help you check and solve the problem.
Ho acquistato questo kit e devo procedere al montaggio . Vorrei montare il tutto sulla mia city bike, ma penso che sia poco adatta a questo kit .MI può consigliare se procedere, ho trovare una e-bike come nel video per procedere nella installazione.
Ciao, controlla i parametri del nostro kit, se ancora non riesci a confermare se può essere installato, contatta il nostro servizio clienti della piattaforma di acquisto
Was heißt Error 24 ?? Wieso steht nichts im Handbuch ???
Bitte prüfen Sie ob das Motor Kabel richtig und fest mit dem Controller eingesteckt wird? Man kann die Kabels wieder einstecken. Wenn es noch den Fehler gibt, senden Sie bitte eine Mail an service@yosepower.com.
Sponsor please hahaha
What to buy Chinese bike
Are you asking where you can purchase one? If you're interested in YOSEPOWER electric bikes, you can check out our official website at yosepower.com.
9
Не тільки велосипеди виробляють czcams.com/users/shortsRU6lPWpZh4U
Hi my 350w hub motor is making a horrible noise and is in warranty what do I do?
Doesn´t have to be a Motor Damage (very unusual). Coul have many other reason. Can you discribe it?
please contact service@yosepower.com to get help, thank you for support YOSE POWER!