Mounted a yose power 2021 28" front motor kit on my bike and everything works great. No need to pull the left crank off with the new two piece pas sensor plate.
@yosepower ich überlege mir dieses Kit zu bestellen. Mein Frage: funktioniert dann weiterhin meine Scheibenbremse oder wird nach Installation durch den Motor an der Vorderachse gebremst?
Be nice to know what the LCD settings mean l have the new battery and LCD so it is different to the one in the video also l don't know where to turn on the lamp ? Or use the 6 km for pushing the bike? Somebody help.?
@@YOSEPOWER Youre welcome, I have one more suggestions that I think could help your customers: After I had no problems with the kit for the rear wheel, I also bought a kit for the front wheel for another bike. Here the wheel does not fit with my standard steel fork. I also tested with a quite common Suntour suspension fork, this also does not work. In both cases the motor rubs at the fork, because the inside of the fork is not straight. I now bought a Zoom suspension fork and there the wheel fits perfectly. So I think it could be helpful to publish some pictures that show examples of how forks look that fit and how forks look that dont fit.
@@jeanyluisa8483 Having same fork issues. Had to remove disc bolts and their plastic spacer to stop them hitting (using rim brakes). But the disc bolt holes need to be sealed now to stop water in motor. Needed x2 12mm washers on the other side. But fork 'lawyer lips' are causing big issues and I had to grind the included washer's outer diameter smaller. But it still won't fit so I think I need to grind the fork slots wider too. Just drilling a bigger hole in a washer is very time consuming and the bit seems to go blunt fast. I suggest you include extra washers with different outer diameters. Also the PAS probaly won't fit my old "cup and cone" bottom bracket.
No sou els únics que veneu conjunts per bicicletes. Però només el detall de posar les instruccions en espanyol, es motiu suficient per comprar el vostre producte. Això es un detall de respecte al consumidor. No serà l'últim conjunt que us compri.
hello, thank you for using YOSE POWER! we have totally sold out 30,000pcs wuxing brakes , the todally feedback is very good, also wuxing brand in china is good one, anymore we accept your suggestion, we will consider to order more famouse brand like shimano in future!
Hello, I'm sorry that the installation location of the controller is missing in our video. Under normal circumstances, the controller can freely choose a suitable installation position according to the bracket of the bicycle. Most people will choose the bottom bracket.
Mounted a yose power 2021 28" front motor kit on my bike and everything works great. No need to pull the left crank off with the new two piece pas sensor plate.
Thank you for your support of YOSE POWER!
@@YOSEPOWER why don't you sell a front motor in USA?
@@Luke-ew6uo Thanks for your suggestion, we will develop more products for the US market in the future.
Do i need to buy a battery or it will be with kits?
Dear Yose Team - you clearly have to remind the audiance to use this kit for Ebike Forks only. An ordinary Fork will fail for suree (break) Thank you!
dear sir, thank you for your kind and important tips!
bulshit lol
Do I need to connect the PAS sensor.
Will it only work on throttle without the PAS sensor?
Yes. It can work on throttle without the PAS sensor
@yosepower ich überlege mir dieses Kit zu bestellen. Mein Frage: funktioniert dann weiterhin meine Scheibenbremse oder wird nach Installation durch den Motor an der Vorderachse gebremst?
Hallo, bei korrekter Installation wird die Nutzung der Bremse nicht beeinträchtigt.
Kann ich irgendwie ein Rücklicht an das Rote Kabel was für den Frontscheinwerfer genutzt wird anklemmen? Wieviel Volt kommt am Frontscheinwerfer an?
Hallo, das ist machbar, die Scheinwerfer brauchen 36V
Be nice to know what the LCD settings mean l have the new battery and LCD so it is different to the one in the video also l don't know where to turn on the lamp ? Or use the 6 km for pushing the bike? Somebody help.?
I suggest you contact our customer service, they will help you solve this problem.
My doesn't have disc brakes :( what can i then do? can you just simply buy the disc or do i need a bigger upgrade?
Hello, Bikes without disc brakes can also be DIY with our kit.
i have 9,5 cm clearance on my front fork. disk brakes. can i install this kit?
The clearance is slightly smaller, if there is a 10 cm clearance, it can be installed perfectly.
Why are the motor cables so long? A connector closer to the motor would make it much easier to dismount the wheel to fix a flat or change a tire.
thanks for your suggestion.
@@YOSEPOWER Youre welcome, I have one more suggestions that I think could help your customers:
After I had no problems with the kit for the rear wheel, I also bought a kit for the front wheel for another bike. Here the wheel does not fit with my standard steel fork. I also tested with a quite common Suntour suspension fork, this also does not work. In both cases the motor rubs at the fork, because the inside of the fork is not straight. I now bought a Zoom suspension fork and there the wheel fits perfectly.
So I think it could be helpful to publish some pictures that show examples of how forks look that fit and how forks look that dont fit.
@@jeanyluisa8483 Having same fork issues. Had to remove disc bolts and their plastic spacer to stop them hitting (using rim brakes). But the disc bolt holes need to be sealed now to stop water in motor.
Needed x2 12mm washers on the other side. But fork 'lawyer lips' are causing big issues and I had to grind the included washer's outer diameter smaller. But it still won't fit so I think I need to grind the fork slots wider too.
Just drilling a bigger hole in a washer is very time consuming and the bit seems to go blunt fast.
I suggest you include extra washers with different outer diameters. Also the PAS probaly won't fit my old "cup and cone" bottom bracket.
No sou els únics que veneu conjunts per bicicletes. Però només el detall de posar les instruccions en espanyol, es motiu suficient per comprar el vostre producte. Això es un detall de respecte al consumidor. No serà l'últim conjunt que us compri.
Thank you for your support of yose power.
The only okay component in this while kit is the motor. The brakes for instance is pure garbage. They shouldn't ship those Wuxing brakes.
hello, thank you for using YOSE POWER! we have totally sold out 30,000pcs wuxing brakes , the todally feedback is very good, also wuxing brand in china is good one, anymore we accept your suggestion, we will consider to order more famouse brand like shimano in future!
So wheres the controller located? Video skipped that part.
Hello, I'm sorry that the installation location of the controller is missing in our video. Under normal circumstances, the controller can freely choose a suitable installation position according to the bracket of the bicycle. Most people will choose the bottom bracket.
@@YOSEPOWER Ok, thanks!