Replace clutch slave cylinder | Clutch fluid leak | Sinking/Spongy clutch pedal | Vista Manza Zest
Vložit
- čas přidán 7. 11. 2023
- Repairing a leaky clutch slave cylinder which caused clutch pedal sinking, trouble shifting gears etc. This video provides a brief guide on replacing clutch slave cylinder and bleeding it properly.
- Auta a dopravní prostředky
Brother, For the Ford Figo 2013 Model, How often should we replace transmission Oil.
The service manual does not mention transmission oil top-up check or refill.
I hope you can help me out.
Posting this in your recent video hoping it will gain your attention :)
Hi there, the Ford factory provided trans oil is for life...just need a topu up. If it's replaced before...an interval of 30 or 40k kms would be good.
Bro can u make a DIY video on ford aspire 1.5 tdci diesel intercooler flush/cleaning. Thanks in advance❤❤
Sure bro will do that shortly....
@@dailyhandsdiysir how to contact u
Hi sir i need help my ford fiesta while running engine suddenly turn off what is the reason pls tell
There're many reasons like crank or cam sensor fault...injector or fuel related fault...etc. You need to scan for any codes....
@@dailyhandsdiy crank sensor cam sensor both are same or else different sensors reply sir...
they are different bro...
Sir, I have a fiesta tdci 1.4 whose abs light was glowing. After scanning rear abs sensor fault was coming . Now I have replaced both rear sensors with new ones and also got new abs tooth rings but after all this I am still getting abs light with error code Tone Ring Tooth Missing for both wheels. Also this tone ring tooth missing error was not coming earlier and handbrake light is nowcontinuosly on after all this. Plz Help .
is that an aftermarket sensor which was installed
@@dailyhandsdiy Sir I actually found the problem. The new aftermarket sensors were at fault.The car wasn't accepting them. Now I have installed oem pre owned ones as new ones cost 10k+. Now my car is fixed. Thank You
aah yes... aftermarket sensor parts won't fit in Ford cars 😅
@@dailyhandsdiy Yeah 😂
Do you have a workshop? If yes where exactly is this? Or you are doing everything yourself 😅
It's not a workshop...just doing things myself
@@dailyhandsdiy awesome 👌
Any suggestions for door closing sound reduction ?
@rmnair001 could use wd 40 and grease on the hinges, and there's a damper with bulges, do grease it.
@@dailyhandsdiy thank you so much will try that