The ULTIMATE Starlight Headliner Guide! (Suede, Sunroof & 450 Stars)
Vložit
- čas přidán 9. 06. 2024
- I've always wanted to add stars to the sunroof cover section of my headliner and the goal was to upgrade the headliner I currently have on the car. After wrapping the headliner in black suede and adding starlights to the sunroof cover we've definitely achieved that!
_________________________________________________
► Artist Attribution
Music By: "KaizanBlu"
• Instagram - / kaizanblu
• SoundCloud - / kaizanblu
• Facebook - / kaizanblumusic
• TikTok - @kaizanblu vm.tiktok.com/aCYwfx/
• CZcams - czcams.com/channels/Utx.html...
Licence: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
• Music published/ licensed by: Chill Out Records @ goo.gl/fh3rEJ
► Artist Attribution
Music By: "After The Fall"
Track Name: "Pieces"
• SoundCloud - / afterthefallof...
• Instagram - / afterthefal...
• FaceBook - / afterthefall...
• DOWNLOAD @ www.chilloutrecordsmusic.com
Licence: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
- Full licence here: creativecommons.org/licenses/...
• Music released by: Chill Out Records @ www.chilloutrecordsmusic.com - Auta a dopravní prostředky
That was awesome. Thank you!
My dad has been doing upholstery his whole life and i have learned a lot from him, you could had used only suede any kind of type and install right on top of ur original material no need to remove the foam unless ur headliner is damaged
That’d make it so much easier! So would there be any specific prep to the headliner fabric already in place since it’d be fabric glued to fabric?
@@DitoCardona you would spray glue on ur headliner on its material and u would also spray glue on the suede that you would be puting on, let it dry half way then apply.
my headliner had water on it from a leak and stained, so i would assume remove mine?
a@@Armens_63s
Will not removing the old fabric affect the fitment at all?
Dats SOLID bro and very well detailed for us that's trying to DIY . Mahalos
Well done and explained top notch!
Nice video. I've been wanting to do this to mine. I thought you couldn't do it to the sun roof visor. I like that you got an extra one to work on while still keeping your og one inside your car.
I am very glad you showed how to do it. I would say Dito that you are a pro.
Hello... That's a very nice video.. can you show were are you connected and the position of the power and light supply...
I would recommend Permatex Headliner adhesive!
brother this was an amazing video man. Imma do this when i get my car. you best believe that! keep it up man!
Great content ill be doing this to my 2020 ford fusion
Same. I can’t wait but of course it’s gonna take some days
Starlights on a 2020 would be awesome!
loved the video bro only thing that wouldve made it convenient is if you added all the product links you used to help us a bit. Regardless appreciate the tutorial and attention to detail!
cool lighting working on mines this year also where did you urder the fabric thanks
I love your videos. Just gotta wait till I get the money to do all of this
The starlight kits the most expensive part but it’s worth it!
Alr that’s a pretty sick fusion, I’m not big on the wheels but damn
Hey, awesome video! I was wondering how did u install the sunroof and headliner all together at the end
Man I wish you would post more , I feel like I watch your video and then I’m just waiting for the next one lol
Lol thank you, and I’d love to! Just balancing the time between doing something for the car, filming and editing I always end up on the short end of time or just not home. But trust me that’s the direction I’m aiming lol
@@DitoCardona I’m new here great video I’m bout to get starlights. So definitely loved your video. What color is the wrap on your car?
I ŁOVE your videos, keep it up🎉❤
Thank you!
Link for the kit/fabric? I've done one before with just dying the fabric and an amazon motor for the lights, but yours seems of better quality
@Dito Cardona can u send an exact link to the suede fabric, bc there are many sorts, and i want to have the right one
I should make a video on my fusion. Looks simalar to yours and I have the same looking headliner but I combined 3 kits and 1150 lights
Can u cut them with clippers instead of the nail clippers?
I install sunroof in cars and what I use for removing the foam is a simple sand paper or sandpaper block and it's very easy
Aftermarket sunroof are junk lol
I agree with you! Its just my job but I will never do that to my vehicle
@@eliyamil117 me either lol. I installed them for 22 yrs. Them camry braces are the worst 😫
Where did you hide the module?
You can run the wires down the back corner panel and hide the box in the trunk area, there are videos to demonstrate where one would place the module.
Hope this helped out.
So where did u place the led box
What are the headlights called? I’m trying to find what you have.
How did you get your roof console black?
Hey bro how did you remove the sunroof ?? I’m having trouble and I have my whole headliner out already ..
I’ve been looking for one tht actually does the twinkle effect sent back like 5 different sets cuz they didn’t do what I wanted
How did you connect the lights to your car. Do you use a the battery or a plug adapter
Bro made a ford fusion actually kinda cool 👍🏼
Is this on your shade for your moonroof also?
Do u install these ?? Would love to do this to my daughter's car as a surprise before she leaves to college
Do you have a link to the suede you used?
bro said “granted” so much😂
How do we hard wire the starlights
Very in-depth tutorial, thank you! :D I'll be adding to my '20 Fusion Titanium AWD. Do you know if there is a way to integrate the fiber optic cables to turn on / off at the same time your exterior lights do? That would be sick.
Love my 20 Titanium. Just starting to mod mine.
I ran a 12V extension under the rear seats, under the rear carpet and behind the rear AC vents into the 12V socket in the center console. They turn on when you turn the key/press start and turn off 1 hour after turning your Fusion off.
Just splice the power cable into your lights. I’m gonna try wiring mine to the front because I wanna connect it directly to the battery like I did with my dashcam so I’d just have to extend it to the headlights and splice it into those wires so when they turn on it does too. Alternatively if you have an auxiliary battery you can just connect it to that and and splice them into the taillights which is less tedious
Wait how did u do the sunroof
Finally found a reason to buy one of those auto glue guns.
Your camera angle and speech reminds me of chris fix, you sure you arent his brother, chris builds? 😂
How did you set up the sunroof cover optics
i just wanted to know where you got a new headliner for your fusion i have a 2013 fusion and did starlights and suede but am not satisfied and wanted to redo it
From 13 to 15 I want to say is the same maybe 15-19 is the same but I’m not 100% so you can go to a a ford dealership to get it
hey guys, loved the video. I have a question I'm doing this right now to my car. I have taken my roof liner out and have glued on the suede material on to my roof. my holes are marked. I've noticed after drilling about 15 holes that the drill bit I'm sing it twisting the suede and making it look pretty bad. I'm glad I noticed it. any body have any suggestions on what I can use to make the holes for the fiber optic lines without twisting up the material. I noticed in your video you kit came with drill bits. Where they a certain kind and did you ever run into the problem of your material twisting up?
Use an upholstery needle. Might be a bit tedious when pushing the fibre optic through but worth not destroying your suede
Im having the same issue lol. Its so random when it decides to do it
Yeah I was told use a needle
Links to everything?
Does the new fabric come padded already? Would you say this can be done over the weekend with full installation?
No it doesn't, it depends it's very time consuming, some people have done everything in 8 hours with a help of a friend
What were the measurements of the fabric?
I’d love to see how you actually got the sunroof cover wired and put in the car. Since it doesn’t connect to the headliner I’m afraid I’d rip all the lights out trying to get the cover back on the track
Did u figure this out I feel this is vital information he left out😅
okay!!!! I bought a similar kit where did you connect your kit? my comes with a smaller cable and my understand is you need to put the box on the back so where do I connect it ?
I haven't done my fusion yet, but on my last car I ran the optics back through one of the back pillars and had the box in the trunk in a little net so it didn't move around, u did have to cut a hole in the trunk liner for the fiber optics though... I want to mess with the fusion to see if there's anywhere that the power box will fit without cutting tbough
link for the kit please !
link for the kit??
How did you route the motor? I have the same kit and it seems huge im not sure where to locate it
Did u happen to find a spot for it boss??
were you located?
Does it hurt the headliner if you just put the suede over the original material? I need to find out because I will be putting lights this week so needd to know if it’s ok to just put it over it.
Yes. Don't scrape the original of unless it's failed. You're eating your time and it's not easy
where are you located
I've watched like 7 of these now and I can't find a video where someone shows where the led driver goes. I know it'll be different for every car and each starlight kit but I'd like to see a general idea of what type of spaces the box will fit.
Thats the thing man, every car is different. Just gotta pull things apart to familiarize yourself with the areas.
Ilove ford fusion
How does the sunroof not rip them out when it opens up?
Give it slack before glueing the fibers down and just make sure it doesn’t intersect with the rail
How do you wire it up?
Like to assume there’s a way to connect to battery or a plug in from a usb or something
You throwing away your milwaukee packout system? 🤣🤣🤣
Can you take the cut off "slack" and make more stars?
The slack wouldn’t be long enough
Couldn’t do this to an NA miata huh? 😢
How did u pull out the headliner in your car without taking out any of the windscreens???????? Coz this is not a hatchback
Fold both seats back, and fold it like a taco. Just enough to get it out
I'm doing mine rn and my shit is not this clean 😅
"Hey guys..." thought it was Chris Fix
tbh youre voice sounds like chris fix
Not that it’s far off but I’d say you’re just over 200.00 in the system and materials after tax and all. Still better than 1000.00
187$ still not bad
Why is mine so much more flimsy than yours?
How did you connect it to the car ? And where did you place the led machine
1:38 bro 450 is not 50% more then 300 unless I just heard it wrong but even the subtitles say 50%
50% of 300 is 150. To do 50% more, you need to add that 150 to 300. 300 + 150 = 450.
450 stars and 450 likes but im going to make it 451 likes!
Ay why you have my last name
Mask up next time my dude ur lungs will thank me
dude this is the worse project i ever took up on the strings so many they're getting caught up and tangled I already took em out once see how it goes for me tomorrow
clean 🧽 fusion! totally the reason im working on mine! definitely will be doing this in the near future! is it hard to take out or reinstall the headliner?
To bring it down it’s more just a lot of parts you have to undo/remove but that can be done in about half an hour. The harder part is removing it from the vehicle because you go through the trunk, I have a video where I speak to it more specifically but it’s definitely doable as a beginner 👍🏼