Funny. Just about the same as my Bronco. A 73, no transmission, dana 20 was taken apart in the bed, and red. Just put n a new AX 15 and rebuilt the transfer case. New carburetor got the OG 302 running. New gas tank, twin sticks, and wiring harness about to go in. Crazy thig is my wife named it Bobcat Betty. I brought it home the same day Betty White died and we saw a big bobcat on the property. Ha.
Loooong time subscriber and diehard fan that's hearing words my Jeep loving heart has been waiting for: suspension, big tires, twin stick....oooh la la! Bring it on! Let the games begin! Betty Boop Bronco is beautiful and is one of the only off-road vehicles I'd ever consider over another Wrangler. Oh my! I'm so excited🤘🤘🤘
I spent 3 years with my employers 66 bronco, and loved every minute that I drove it. It was a true off roader that would barely go 50 mph! I daily drove it for my job and it was a beast.
I love early Brocos. We used to drive my buddy's Bronco in the snow and go around pulling people out of the deep snow just for fun. I'll be watching this one!
Thank you for not putting an LS in it . I learned how to drive in a 1967 3 on the tree Bronco . It was our shop plow truck . They have a soft spot in my heart . You will never loose money on that truck they just keep going up in price, so buying it was a smart move. I am still sore at my Dad for selling it when I was away at school for 500.00 bucks. It was 100% original drive train even the clutch ,rode like a barn wagon but I loved it . Keep posting the build and I will be here to watch.
You both are so lucky. You can hang out and work together. Its a ball watching you guys. Always great content. Keep it up. Thanks for doing what you do.
Great looking bronco ! I had a red 73 myself. I built from the ground up! Took her 4 wheeling up and down the east coast. A lot of fun, a lot of fun memories!
A refresh for Betty Boop Bronco,sounds like an awesome project.You guys are an inspiration and great motivators.I have a 2004 GMC Canyon with a 5 cylinder that the head went bad on so 2 summers ago I installed the new head but during the reassemble I got the timing off,so after 4 months of doing all this work it didn't run,I felt defeated and gave up.After watching your videos and social media for a while now I have decided to try again except this time I'm going to yank the motor and tranny out so I can actually get to everything and make sure it's right.Emily and Aaron you are one of my favorite channels on CZcams and do so many great things for the car community,2019 will be a great year and can't wait to see what adventures unfold.
Truckbuildercarl What a kind comment, thank you so much!!! We are so glad to hear we inspire you, keep the hope! It’s rarely easy but it’s CERTAINLY worth the struggle!!
Love to see the AOD - my 76 is running 4.11 on TruTrac front and a locker rear. Cruise is 57 mph @2,700 rpm on BGF 33s = 8.5 mpg. B&M C4 with a BTI deep girdle pan. Great rock crawler but mileage is a killer. 302 Edelbrock with Holley Truck Avenger but even with a big main & aux it takes a lot of fuel.
If Jennifer Nettles had a younger , even more Beautiful sister, who was actually cooler than a Rockstar = Emily . . gonna be a cool project, looking forward to seeing where you 2 go with it...
Old boss of mine would only use 76's and 77's up here for the PS and PB options in a mobile mechanic company he owned. Some great little trucks those ! Looking forward to see what you do with her : ]
Hell yes build Betty!! A 5. 0 with some nice exhaust and cool lift. That's definitely one to love on!! Thanks for the update and looking forward to many more!!
She is an awesome Bronco! I'm Glad Betty has Rockstar Goals!! Can't wait to see more! I've always loved the old school Broncos, you don't see them often these days. You're so Lucky.👍
Really looking forward to this. My '76 Bronco has similar oil issues. I bought a salvage Explorer meaning to do the "Explorer swap" on mine, but have never gotten around to it because my Bronco's 302 just won't quit (and I have too much fun driving it). Hopefully, your videos on this will inspire me to finally start tackling the project.
I love it man, I’ve got a a extremely rare 67-72 bumpside F truck body Bronco made in Brazil, I love your bronco I am looking at broncos to get ideas to restore it , similar rear tailgate with short wheel base too . All the best good look that’s my favourite color I am making mine red too
Ive been sub for a long time and ever since the first time i saw betty i wanted to see what yall would do with her my dad had 3 of these early Broncos from the time i was a kid to a teenager amd i love them so much cant wait to see her all finished
I'm looking forward to seeing how this develops. Newer subscriber (since November or so) but love your stuff and enjoy watching both of you get to the end product.
Glad to see you continuing with the car builds. Aaron, I know you love your planes, and I respect that, but the channel is SO much more interesting with you two doing cars!!!
Thanks for the update guys, I’m REALLY looking forward to this one! Plus, doing short updates like this is a good idea - I may do something like this too. I’m so overwhelmed with what we have to get done plus “life stuff” that I’ve not posted as often as I should. This is a good alternative.
Spyder Garage Yes!! We’re so far behind on editing, like you are! I think folks want more frequent content as opposed to wonderfully edited less frequent ones! It’s hard for us though, because we like long episodes that tell a story from beginning to end!!
Love you guys ! Check the the the rocker panels real close on a bronco . This project needs to be to be done on paint configuration . I have seen all kinds of drive train set ups . Go for it !
I love the first generation of Bronco. Had I not gotten myself elbows deep in a crew cab diesel project, and a newer F150 project, and...and...and...(lol) I'd have one of them.
I love this segment. I learned to drive on a 1969 Bronco pick up style. Had 170 ci straight six with manual 3 speed on the tree transmission. Couldn't drive faster than 55 but boy could she pull in low 4 wheel. Would love to find another.
Our car is also named Betty. My aunt took inspiration from Betty Boop. She's not a Bronco though. She is a 1969 VW Beetle. Good luck in restoring Betty!
Over a year ago, I saw a picture of a V-8 engine in Betty Boop's cargo area. I speculated that an engine change was in the offing. I was right, but the recipient was a red Ford pickup truck, not Betty, herself. It's good to see the old girl getting a make-over. It should be an interesting project. Adelante! as the local Tejanos would say.
Very cool guys. I just picked up an early Bronco ('69) myself this summer. Looking forward to following your build - please do a detailed walk-thru on the AOD. I'm thinking of that myself in the future.
Possibly an opportunity missed with the carbureted explorer engine and AOD. A much more reliable combination would be to keep the fuel injection, and keep the PCM and swap in the 4r70w from the explorer. The 4r70w would easily handle all the power that 5.0 can offer, even with a cam, intake, and headers. The AOD my not be happy behind that much power over stock. The AOD swap is very do-able, but will require tearing it down to change the output shaft and tail shaft housing unless it is sourced from a 4x4. 4r70w would have be same problem, unless the explorer was 4x4 (which up here would be almost a given) If I were to do this swap, I would be looking at upgrading to the A+ OD servo, lentech constant pressure valve body, and upgrading to the one piece input shaft and wide ratio gear set from a 4r70w. Doing this eliminates the weak inner input shaft of the AOD which is probably the most likely part to break behind upgraded horsepower/torque, unless the OD band wears out first. With the upgrades above the AOD can survive 400+ horsepower, but without them longevity beyond 250hp can be a crapshoot. The 4r70 is good to 400hp out of the gate without any mods. I love the AOD, but the 4r70w is a better option all day long if you can handle the electronics. Looking forward to the build!
Great project and wish you guys the best. There’s a couple of cool builds on the tube right now, Nashville Early Bronco, which I believe you guys already know (#nash) and Matt’s garage, who just sold his to Mile.3 Garage. Y’all have a great opportunity to really showcase Emily’s expert wrenching on a 🐴. Congrats on a great channel.
Absolutely love you guys and your projects 😎 . Can't wait to see this one getting going, love the old box Broncos. I hope to get by and see you guys sometime I live in Louisiana and work in Orange Texas. We travel to west Texas several times a year. I'm not real sure where you are located but would love to meet you both.
My dad used to have a k5 blazer before I was born. He tells me he had a pulley system rigged up in his garage and when he wanted his hard top off he hooked up the pulleys and lifted the top off of his blazer.
A car wash that still takes quarters?! Haven’t seen one of those in years. You can’t start a car wash for less than $2 around here these days. Great video guys!
Looking forward to the upgrades, Happy late Birthday also . If I remember correctly it was a few days ago on Feb. 16th we share the same birthday I believe .
Funny. Just about the same as my Bronco. A 73, no transmission, dana 20 was taken apart in the bed, and red. Just put n a new AX 15 and rebuilt the transfer case. New carburetor got the OG 302 running. New gas tank, twin sticks, and wiring harness about to go in. Crazy thig is my wife named it Bobcat Betty. I brought it home the same day Betty White died and we saw a big bobcat on the property. Ha.
Loooong time subscriber and diehard fan that's hearing words my Jeep loving heart has been waiting for: suspension, big tires, twin stick....oooh la la! Bring it on! Let the games begin!
Betty Boop Bronco is beautiful and is one of the only off-road vehicles I'd ever consider over another Wrangler.
Oh my! I'm so excited🤘🤘🤘
I spent 3 years with my employers 66 bronco, and loved every minute that I drove it. It was a true off roader that would barely go 50 mph! I daily drove it for my job and it was a beast.
I can't help, but grin. My Dad always said that he wanted an older Bronco like yours. Pleasant memories of my Dad. Good stuff guys.
Dude, you have the coolest girl. It's great to see a girl interested in this stuff.
Really looking forward to this build.
I love early Brocos. We used to drive my buddy's Bronco in the snow and go around pulling people out of the deep snow just for fun. I'll be watching this one!
Thank you for not putting an LS in it . I learned how to drive in a 1967 3 on the tree Bronco . It was our shop plow truck . They have a soft spot in my heart . You will never loose money on that truck they just keep going up in price, so buying it was a smart move. I am still sore at my Dad for selling it when I was away at school for 500.00 bucks. It was 100% original drive train even the clutch ,rode like a barn wagon but I loved it . Keep posting the build and I will be here to watch.
You both are so lucky. You can hang out and work together. Its a ball watching you guys. Always great content. Keep it up. Thanks for doing what you do.
So glad you started on her. My all time favorite vehicle is the 67-77 Bronco!
Great looking bronco ! I had a red 73 myself. I built from the ground up! Took her 4 wheeling up and down the east coast. A lot of fun, a lot of fun memories!
A refresh for Betty Boop Bronco,sounds like an awesome project.You guys are an inspiration and great motivators.I have a 2004 GMC Canyon with a 5 cylinder that the head went bad on so 2 summers ago I installed the new head but during the reassemble I got the timing off,so after 4 months of doing all this work it didn't run,I felt defeated and gave up.After watching your videos and social media for a while now I have decided to try again except this time I'm going to yank the motor and tranny out so I can actually get to everything and make sure it's right.Emily and Aaron you are one of my favorite channels on CZcams and do so many great things for the car community,2019 will be a great year and can't wait to see what adventures unfold.
Truckbuildercarl What a kind comment, thank you so much!!! We are so glad to hear we inspire you, keep the hope! It’s rarely easy but it’s CERTAINLY worth the struggle!!
Looks like it is going to fun and a bit hectic. In the shop. 😉👍👍👍
Love it. We just brought home a 72 Bronco that had been on a farm for 22 years and will be getting it Fired up soon. Keep up the great vids.
Really looking forward to this build. Have always loved these and have been keeping an eye out for a good deal on one for a few years.
Love to see the AOD - my 76 is running 4.11 on TruTrac front and a locker rear. Cruise is 57 mph @2,700 rpm on BGF 33s = 8.5 mpg. B&M C4 with a BTI deep girdle pan. Great rock crawler but mileage is a killer. 302 Edelbrock with Holley Truck Avenger but even with a big main & aux it takes a lot of fuel.
If Jennifer Nettles had a younger , even more Beautiful sister, who was actually cooler than a Rockstar = Emily . . gonna be a cool project, looking forward to seeing where you 2 go with it...
I see the similarity.
Old boss of mine would only use 76's and 77's up here for the PS and PB options in a mobile mechanic company he owned. Some great little trucks those ! Looking forward to see what you do with her : ]
Hell yes build Betty!! A 5. 0 with some nice exhaust and cool lift. That's definitely one to love on!! Thanks for the update and looking forward to many more!!
I'm excited to see Betty come back more fun that she already is!
Love those old Broncos, had been seeing it in the background of your videos. Good to hear that you are going to freshen her up.
Appreciate the update, look forward to seeing Betty Boop being rejuvenated!
Good ole Betty Boop ‘s got some potential. Thanks for sharing. Enjoy the ride...
Looking forward to this series. Restoring a 69 Sport myself. Gotta love early Broncos.
Bout time can't wait to see it done, You two be good and rest a little, don't get burnt out.
She is an awesome Bronco! I'm Glad Betty has Rockstar Goals!! Can't wait to see more! I've always loved the old school Broncos, you don't see them often these days. You're so Lucky.👍
Sweet project. Old Broncos and Scouts are the best!
Really looking forward to this. My '76 Bronco has similar oil issues. I bought a salvage Explorer meaning to do the "Explorer swap" on mine, but have never gotten around to it because my Bronco's 302 just won't quit (and I have too much fun driving it). Hopefully, your videos on this will inspire me to finally start tackling the project.
Those older 302s are hard to beat! Id rebuild it. Its a better engine
When I saw the 5.0 sitting there I was so excited. I hope that all works out really well and she is an awesome rig again.
Love the older model broncos! Can’t wait for the rest.
I can’t wait to see this done
I love it man, I’ve got a a extremely rare 67-72 bumpside F truck body Bronco made in Brazil, I love your bronco I am looking at broncos to get ideas to restore it , similar rear tailgate with short wheel base too .
All the best good look that’s my favourite color I am making mine red too
Excited to see this project .....those old Broncos are very cool
Ive been sub for a long time and ever since the first time i saw betty i wanted to see what yall would do with her my dad had 3 of these early Broncos from the time i was a kid to a teenager amd i love them so much cant wait to see her all finished
I'm looking forward to seeing how this develops. Newer subscriber (since November or so) but love your stuff and enjoy watching both of you get to the end product.
my dad had one , and i always love them , can't wait to see you working on it
Right on sparkies! Lovin it! Those old fords are just too bad ass!
This is going to be awesome! I am installing a 302 with an AOD into a 62 Mercury Meteor. Cant wait to see the build. Thanks for the cool intro!
Sad nobody can leave these old classics the way they are . They all have to make it "Better" .
great project, I have a 1970 bronco
Glad to see you continuing with the car builds. Aaron, I know you love your planes, and I respect that, but the channel is SO much more interesting with you two doing cars!!!
Looking forward to following the build! I'm sure it'll be fun!
I love the early broncos. You'll like the AOD in it. My ranchero has an AOD and with 3.80 gears,it only turns 2,200 rpm at 70 mph.
Working on my '66again. Just did a new wiring harness and a fitech. Good luck guys, keep em comin!
That's a sweet find. Can't wait to see this thing get built!
Enjoy hearing the "ya-all" ! We don't hear that in Wisconsin. Best to you both!
Sounds like a great build...I'm stoked for y'all
Aww... EFI for the win!!! Great project, I’ve always liked those Broncos!
Love it! You guys seem like the perfect couple to do this.
stuck a 00' explorer longblock in 86' bronco with the factory aod. Worked great!
Emily the last time I was this early you were still learning how to drive a three on the tree Ranchero from David Madiera!!
I did an AOD swap on mine… Wow what a difference, I love it!
Thanks for the update guys, I’m REALLY looking forward to this one! Plus, doing short updates like this is a good idea - I may do something like this too. I’m so overwhelmed with what we have to get done plus “life stuff” that I’ve not posted as often as I should. This is a good alternative.
Spyder Garage Yes!! We’re so far behind on editing, like you are! I think folks want more frequent content as opposed to wonderfully edited less frequent ones! It’s hard for us though, because we like long episodes that tell a story from beginning to end!!
Such a great project, looking forward to this one!
It will be sweet can't wait to see more episodes thanks for the update have a great day
Always cool to have one you really love get some upgrades.
Love you guys ! Check the the the rocker panels real close on a bronco . This project needs to be to be done on paint configuration . I have seen all kinds of drive train set ups . Go for it !
Sweet Project
I would go with the stock ford efi for this project! the maf 5.0 mustang stuff is super easy to deal with
Glad to see you guys back and looking forward to the bronco upgrade 👍🏻
I love the first generation of Bronco. Had I not gotten myself elbows deep in a crew cab diesel project, and a newer F150 project, and...and...and...(lol) I'd have one of them.
Missed you guys! Looking forward to the build...
I love this segment. I learned to drive on a 1969 Bronco pick up style. Had 170 ci straight six with manual 3 speed on the tree transmission. Couldn't drive faster than 55 but boy could she pull in low 4 wheel. Would love to find another.
Boop is my favorite rig of yalls. Excited to see her more :)
Glad to see you back
Our car is also named Betty. My aunt took inspiration from Betty Boop. She's not a Bronco though. She is a 1969 VW Beetle. Good luck in restoring Betty!
Nice BobTail!
Beautiful bronco
Over a year ago, I saw a picture of a V-8 engine in Betty Boop's cargo area. I speculated that an engine change was in the offing. I was right, but the recipient was a red Ford pickup truck, not Betty, herself. It's good to see the old girl getting a make-over. It should be an interesting project. Adelante! as the local Tejanos would say.
Any time guys. We know your busy and have a lot going on (congrats on the TV show by the way) so we'll be here when your ready.
I love old Broncos! I actually like all but the II variant. I rode in one with 3 on the tree and an ex circletrack 302 engine. Spooky!!
All i can say is you two are just out right kooool.....
Nice bronco
Keep on having fun and good memories kids as it will give you tons of smiles and memories in the future!
Very cool guys. I just picked up an early Bronco ('69) myself this summer. Looking forward to following your build - please do a detailed walk-thru on the AOD. I'm thinking of that myself in the future.
Early Broncos Rock 🐎🛠🤗
Possibly an opportunity missed with the carbureted explorer engine and AOD. A much more reliable combination would be to keep the fuel injection, and keep the PCM and swap in the 4r70w from the explorer. The 4r70w would easily handle all the power that 5.0 can offer, even with a cam, intake, and headers. The AOD my not be happy behind that much power over stock.
The AOD swap is very do-able, but will require tearing it down to change the output shaft and tail shaft housing unless it is sourced from a 4x4. 4r70w would have be same problem, unless the explorer was 4x4 (which up here would be almost a given)
If I were to do this swap, I would be looking at upgrading to the A+ OD servo, lentech constant pressure valve body, and upgrading to the one piece input shaft and wide ratio gear set from a 4r70w. Doing this eliminates the weak inner input shaft of the AOD which is probably the most likely part to break behind upgraded horsepower/torque, unless the OD band wears out first.
With the upgrades above the AOD can survive 400+ horsepower, but without them longevity beyond 250hp can be a crapshoot. The 4r70 is good to 400hp out of the gate without any mods. I love the AOD, but the 4r70w is a better option all day long if you can handle the electronics.
Looking forward to the build!
Very clean looking bronco
Great project and wish you guys the best. There’s a couple of cool builds on the tube right now, Nashville Early Bronco, which I believe you guys already know (#nash) and Matt’s garage, who just sold his to Mile.3 Garage. Y’all have a great opportunity to really showcase Emily’s expert wrenching on a 🐴. Congrats on a great channel.
Can’t wait to see the videos!
Absolutely love you guys and your projects 😎 . Can't wait to see this one getting going, love the old box Broncos. I hope to get by and see you guys sometime I live in Louisiana and work in Orange Texas. We travel to west Texas several times a year. I'm not real sure where you are located but would love to meet you both.
Love this couple. Get it.
feb 19th and it was 39 deg in Hillsboro, tx this morning and 40 right now lol
Love bronco s. My uncle had.a red one.
Cool! I love the Bronco! keep up the great work guys!
So Cool!!
My dad used to have a k5 blazer before I was born. He tells me he had a pulley system rigged up in his garage and when he wanted his hard top off he hooked up the pulleys and lifted the top off of his blazer.
Giddy Up Bronco Ya Hoo
Real cool can't wait to see more!!!
If I were doing this project I don't think I would do it much different than you. Just a little freshen up/ clean up.....and got to have the OD !
thank you
A car wash that still takes quarters?! Haven’t seen one of those in years. You can’t start a car wash for less than $2 around here these days. Great video guys!
Wooohoo a real bronco
you should check out Nashville early bronco...lots of good bronco ideas there
Wusup dudes, rock'n'roll !!! 👍🏼🤘🏼💪🏽😎🍻
Looking forward to the upgrades, Happy late Birthday also .
If I remember correctly it was a few days ago on Feb. 16th we share the same birthday I believe .
jjdriver55 You are correct, thank you!
Can't wait new video😃
Also i think it would be badass to powerstroke swap one of these first gen broncos
4BT with twins would fit better.
I'm excited
That oil can catch fire.