This is a step by step assembly guide for the Arrow (Common: 10-ft x 8-ft; Interior Dimensions: 9.85-ft x 7.5-ft) Galvanized Steel Storage Shed. 2020 - 2021 guide!
Thanks for taking the time to post this video! It helps interpreting the directions. I know this video is a few years old, but the instructions and part numbers changed a bit. But the basic steps still apply. If doing this alone, some of the bolts and nuts are impossible/difficult unless you have very long arms. One trick is to use get the nut and bolt together and then use a small amount of the sealing tape (or duct tape) on the nut to "hold" while tightening on the other side.
Started to put this together today (got up to the tables but it was raining and didn't make sense to put weatherproofing on yet... Probably could've gotten the roof on). The instructions suck, so this video was my salvation. Thank you!
I’m glad to see that it takes only 30 minutes and 29 seconds minutes to install. Seriously, thank you so much for the video. For all your efforts, The shed company should compensate you.
Me and my wife just built one of these sheds this weekend. Pain in the butt putting together. You're video is way better then the directions. Wish I would've watched youre videos instead of directions
Good job, I’ve been rewinding this video all day today lol ugh we spent 8 hours on this damn shed today! Had to take breaks, it was 94 here in Denver Colorado today, we still have the top middle part to put on the roof and the doors to do tomorrow after work! Ours is on a big wooden base
My Mom lost the instructions and this video was how I put mine together so thank you and also shows you the quality of the video . Granted I do have construction experience but this video really really help! Thank you !
Thank you so much for making this video! I’m going to use it while assembling 2 of the 8’x10’ sheds! You explained everything so perfectly, I’m not afraid to tackle these bad boys at all! Then I have to assemble the 10’x12’ version!
I've been a builder for many years and have seen quite a fair bit of sheds. The plans in ryan's package czcams.com/users/postUgkxB7IXYxLzb_Ichhe45zM3Im5xfEiSp9vB have some of the nicest looking sheds i've seen in a while.
Great video,I’m on day 2 and my daughter and I will be installing roof, I would’ve trimmed that tree first in your video because I see them branches crashing down on your well built shed, thanks for the video. We painting ours and bolting it to our deck.
Man I wish I found this video earlier! Spent a day working through the instructions. We have the top to build and your video was very helpful! I know we can get this done tomorrow! Thanks for sharing!
Thanks for this fine video! Arrow should pay you a fee👍 it was a bit of a challenge even with two of us. Some small spring clamps helped hold pieces while assembling. Also a magnetized cup holder for screws etc. For us it took easily 2 days steady. Best to you and allergies.😆
Dude you’re my hero I haven’t watched yet but I tried to put mine together last week and the instructions were awful, this will be conquered this weekend
Really good points to look out for. I have had two of these sheds at different houses and they are amazingly long lasting for the money. Mine was $309 including tax. The base cost almost as much. I bought nine 2x6x8s and two 2x6x12s plus 3 sheets 3/4 inch plywood (everything weather treated. Cost was $188. Good job Tasty, great voice adds Value to the listening.
You’re the best man, this video truly helped, I got half way with the build and I was getting confused with the instructions, but your videos made it more clearly on how to get this done now
Thanks for the video. I think instead of swinging the camera around showing the completed parts, maybe an overhead, stationary view would help. Most of us are pausing the video several times to keep up.
YOU ARE A LIFESAVER! A friend of mine gave me his storage building, used and unassembled of course. However some of the numbers are rusted making it impossible to read them. I have the instructions which are pretty easy to understand but it's hard to actually distinguish one part from another at times just by looking at it on paper. Thanks a million for sharing!
Hey Toasty, Interesting how 11 people gave this a thumbs down. LOL. I always watch videos from others before starting a project and I made no exceptions with this shed. I am a pretty handy guy myself, but like to see what mistakes others make so I don't have to learn the hard way. Your video is far and away the best step by step video I found. So from one professional to another you can see why I am puzzled by the thumbs down of the 11 geniuses that apparently snapped their fingers and the shed magically appeared. I do not post CZcams videos but am going to do a short for this shed. If you don't mind I would like to add your link for the step by step assembly. I am basically going to share some info to help speed up the process vs. taking the manual at its word. I'm not doing an assembly video. Thanks for the great video and God Bless. Chazz
Nice video content! Sorry for the intrusion, I would appreciate your initial thoughts. Have you heard about - Mahorrla Wooden Paradise Method (just google it)? It is a good one of a kind product for building better sheds and woodworking without the headache. Ive heard some incredible things about it and my buddy at last got cool results with it. 👍😎
Anchoring is key. And after many years when the base has rusted again it's time to replace or repair. I had an older version at my rental take flight during a storm a few months ago.
Use self-tapping screws or make your own holes if there's parts that don't quite line up. It even says in the manual that things might not always line up so you might have to make your own.
We did it...I prepped steps 1-4 but not doors..and prepping those doors would've helped to. The base took long...we used 16x16 cement blocks... it's all good too!!
You should've gotten paid for this video. The blueprints in the manual are very small and hard to decipher at times. Your video helped greatly I appreciate it.
Sorry for the newbie question but does the shed come with hardware to secure the metal base to the concrete slab? I have an existing slab but I’m wondering how to secure it. Thanks.
Hey brother, I’ve watched this video like 10 times and I’m stuck on step 5. I don’t know how to correctly assemble the side wall frames. What do I do with the 2 channels & 2 angled pieces to connect them to the front & back frame?
I see that you put this shed up a couple years ago. How is the roof holding up. I am going to put on up. I am in northern Wisconsin where we get a good amount of snow. I will be putting some extra support. Great job explaining how to assemble. Thank you!!!
Hey man great video. Just wondering what editing software did you ise for this video. I like how you are able to film this and have the instructions up in the corner
Looks good. I just did one. An wanted to see what the differences were. No rubber seal. An wasn’t sure where to use that tape. How long did it take you? I did it by myself an that’s was not such a good idea.
+++hey guys if you call it a night and then decide to continue this video the next morning please remember where the heck you're freaking left off. The next step was step 12 continued second page showing the beam brace and now I'm stuck trying to figure this crap out because the picture sucks and I was really counting on you guys to show me. Also don't be lazy show the people you actually putting the pieces together and not already having them done. You consider speeding those parts up a little.
I had this same shed delivered last week but I can't get 3 rainless days to assemble it until May 18. I'm doing it myself so it might take that long, not sure. Got the floor frame & anchors too. Anyway good info here, I know more of what's involved now.
Glad we could help! If doing by yourself, the worst part will be the walls. The less wind the better and if you have anything to hold up/ put behind the walls temporarily just in case as well.
Thanks for taking the time to post this video! It helps interpreting the directions.
I know this video is a few years old, but the instructions and part numbers changed a bit. But the basic steps still apply.
If doing this alone, some of the bolts and nuts are impossible/difficult unless you have very long arms. One trick is to use get the nut and bolt together and then use a small amount of the sealing tape (or duct tape) on the nut to "hold" while tightening on the other side.
Started to put this together today (got up to the tables but it was raining and didn't make sense to put weatherproofing on yet... Probably could've gotten the roof on).
The instructions suck, so this video was my salvation. Thank you!
Thanks for this up and beyond video 👍 appreciate you doing all the work showing how it's done 👍👏 gracias señor 🍻
I’m glad to see that it takes only 30 minutes and 29 seconds minutes to install.
Seriously, thank you so much for the video. For all your efforts, The shed company should compensate you.
It takes most 2 weeks.
Haha
@@jackfrosty4674 I can build wooden shed faster and cheaper.
I don’t think I would’ve been able to complete this build without your video
Me and my wife just built one of these sheds this weekend. Pain in the butt putting together. You're video is way better then the directions. Wish I would've watched youre videos instead of directions
Do you know how to makes the doors stop making squeaky noise
I have one of these sheds in my back yard that is ready to be replaced, but we've had it well over 30 years.
30 years??? Seriously? I was hoping for 5 years.
I too just took down my old metal shed of about 35 years..just purchased another but a little smaller size...
@@markrhuett Thanks this just confirmed my purchase in these sheds. That's incredible.
Tornado took the last one I had, it grabbed it and tossed it who knows where? never saw it again.
@@grimsonforce7504 I have one that is 20yo and all i did was paint it so far. still in good shape.
Good job, I’ve been rewinding this video all day today lol ugh we spent 8 hours on this damn shed today! Had to take breaks, it was 94 here in Denver Colorado today, we still have the top middle part to put on the roof and the doors to do tomorrow after work! Ours is on a big wooden base
How did you build the wooden base?
@@christopherschertner499 get some pallets people give away for free then just throw some plywood on top
How big does the foundation need to be ? Exactly 8x10 or slightly bigger
Thanks for the video. My son and I are nearly done with our 6' x 8' shed (we have a small backyard in San Francisco.) I used your video for reference.
OUTSTANDING VIDEO!!!
You made the build of my shed much easier and saved me allot of time!!
Thank You!!!
My Mom lost the instructions and this video was how I put mine together so thank you and also shows you the quality of the video . Granted I do have construction experience but this video really really help! Thank you !
Y'all crushed this!! Thank you so much for this fantastic video. Like may others, I would not have been able to complete this shed w/o this video...
Thank you so much for making this video! I’m going to use it while assembling 2 of the 8’x10’ sheds! You explained everything so perfectly, I’m not afraid to tackle these bad boys at all! Then I have to assemble the 10’x12’ version!
What have you done so far ?
How did it turned out
longer screws before start. Go buy screws 1/4 inch longer for ease.
9:47
I've been a builder for many years and have seen quite a fair bit of sheds. The plans in ryan's package czcams.com/users/postUgkxB7IXYxLzb_Ichhe45zM3Im5xfEiSp9vB have some of the nicest looking sheds i've seen in a while.
Man brother thank you.....if it wasent for your great video i would have never finish....thanks a million
Omg thank you for this video, i loooove CZcams for videos like these😁
I hate the bad diagrams on the instructions guide, very helpful this video.
ikr the instructions weren't really that helpfully Lol
Worst video
Thanks
I am actually working on one right now.
I'm so happy I found this video! It's exactly what I was looking for before I started assembling. Y'all are very detailed and clear. Thank you!
Even my shed is 8x6 this video helped me a lot. thank you very much.
Great video,I’m on day 2 and my daughter and I will be installing roof, I would’ve trimmed that tree first in your video because I see them branches crashing down on your well built shed, thanks for the video. We painting ours and bolting it to our deck.
I listened and not watched ..video still helped ..for moral fortitude
That’s an upcoming project for me. It was great watching it get done ahead of time!
I have to assemble one of these for a client tomorrow. Thank for this video
Man I wish I found this video earlier! Spent a day working through the instructions. We have the top to build and your video was very helpful! I know we can get this done tomorrow! Thanks for sharing!
Awesome video. It helped me a lot. I'm mostly done. Gotta do the roof tomorrow
Thanks for this fine video! Arrow should pay you a fee👍 it was a bit of a challenge even with two of us. Some small spring clamps helped hold pieces while assembling. Also a magnetized cup holder for screws etc. For us it took easily 2 days steady. Best to you and allergies.😆
Thank you I find this very helpful as it is the same shed I'm building!
Dude you’re my hero I haven’t watched yet but I tried to put mine together last week and the instructions were awful, this will be conquered this weekend
Just got to the price and damn inflation is a bitch
Thanks for this video. I’m using it as I do each step/page in the book
Really good points to look out for. I have had two of these sheds at different houses and they are amazingly long lasting for the money. Mine was $309 including tax. The base cost almost as much. I bought nine 2x6x8s and two 2x6x12s plus 3 sheets 3/4 inch plywood (everything weather treated. Cost was $188. Good job Tasty, great voice adds Value to the listening.
I was wondering whats cheaper the concrete or the treated wood 🤔 do you know???
What did you used the plywood sheets for?
Where did you purchase yours from?
@@Mark300win floor
I got one of these from a discount shop. Instructions totally in French lol thanks for this video
You’re the best man, this video truly helped, I got half way with the build and I was getting confused with the instructions, but your videos made it more clearly on how to get this done now
MAN! BIG ONE HUNDRED ON YOUR VIDEO! Extremely Helpful! BY FAR THE BEST ONE FOR THESE SHEDS⭐️⭐️⭐️⭐️⭐️✌🏾
I have followed your video while looking at the instructions. Life saver and lots of irritation. Thanks
Always love the amateur camera super fast panning shots, back and forth, guaranteed to make you dizzy.
Thanks for the video. I think instead of swinging the camera around showing the completed parts, maybe an overhead, stationary view would help. Most of us are pausing the video several times to keep up.
Paid 99$ this video may have saved me and my sanity
Thank you
what?! was going to say it's $500 where I'm @ damn
The best shed installation video,great video well explained.
I'm bout to start mines.. I watched your video first.. you did a great job.. thanks.. wish me luck..
They now sell for $700 wow thats a price increase
Got one similar and same size from Walmart for 350
Let's Go Brandon!
I found one on Facebook for $100 I just picked up!
The Rubbermaid plastic ones are pushing $1600 in Canada🤢
Theyre $399 now at lowes lol
Great video helped me out alot. Thanks Toasty
Thanks bro a lot easier than reading the dame instructions 😆
YOU ARE A LIFESAVER! A friend of mine gave me his storage building, used and unassembled of course. However some of the numbers are rusted making it impossible to read them. I have the instructions which are pretty easy to understand but it's hard to actually distinguish one part from another at times just by looking at it on paper. Thanks a million for sharing!
That's what I'm doing right now. Been a lot easier to buy a new shed.
we had trouble figuring out the sliding door track, which of course you guys skipped. Anyway it was helpful
You are moving the cam back and forth, up and down like a rollercoaster.
Hey Toasty, Interesting how 11 people gave this a thumbs down. LOL. I always watch videos from others before starting a project and I made no exceptions with this shed. I am a pretty handy guy myself, but like to see what mistakes others make so I don't have to learn the hard way. Your video is far and away the best step by step video I found. So from one professional to another you can see why I am puzzled by the thumbs down of the 11 geniuses that apparently snapped their fingers and the shed magically appeared. I do not post CZcams videos but am going to do a short for this shed. If you don't mind I would like to add your link for the step by step assembly. I am basically going to share some info to help speed up the process vs. taking the manual at its word. I'm not doing an assembly video. Thanks for the great video and
God Bless. Chazz
Nice video content! Sorry for the intrusion, I would appreciate your initial thoughts. Have you heard about - Mahorrla Wooden Paradise Method (just google it)? It is a good one of a kind product for building better sheds and woodworking without the headache. Ive heard some incredible things about it and my buddy at last got cool results with it. 👍😎
Maybe some are turned off my the sniffling and snot swallowing of the narrator?
Nicely done Toasty DIY. This video was s huge help. Thanks for sharing..
Very helpful video,thank you. AND that was a bad ass VANS hoodie! 🤗
Anchoring is key. And after many years when the base has rusted again it's time to replace or repair. I had an older version at my rental take flight during a storm a few months ago.
Good to know about anchoring. Had the same problem with the old shed my FIL had installed
Wow this video is amazing! Thank you!
It looks good, now realizing it’s not what will work for me but glad I figured it out before buying so thankyou
Thanks. Best shed assembly video I've watched. It should really help when mine arrives later this week 👍
make sure spot level. Level and square so screws line up.
I needed step 7 the most but you flew through it
Great job bro 👍🛠🔧⚒
BEST VIDEO ABOUT
Great info just bought the 12x12 this will really help with assembly
Use self-tapping screws or make your own holes if there's parts that don't quite line up. It even says in the manual that things might not always line up so you might have to make your own.
I used spray foam on mine after I assembled it worked really good
Spray foam where,any pics?
We did it...I prepped steps 1-4 but not doors..and prepping those doors would've helped to. The base took long...we used 16x16 cement blocks... it's all good too!!
Thanks for making this video! Great work very clear teaching.
You should've gotten paid for this video. The blueprints in the manual are very small and hard to decipher at times. Your video helped greatly I appreciate it.
He gets monthly ad revenue from CZcams for the commercials you watch on his channel.
Thanks for the heads up but I got dizzy trying to keep up with your camera..
Sorry for the newbie question but does the shed come with hardware to secure the metal base to the concrete slab? I have an existing slab but I’m wondering how to secure it. Thanks.
good job I like how you explain ..
This shed has been a b**** lol finally putting roofing on the instructions that came with it bunch hogwash. Thank you for ur video it helped so much!!
Excellent video!!! Thank you!
how long do it take to put the shed together
Great video depicted well
Awesome video, helps a lot. Thanks.
I'm going to do exactly what is done on these videos👍👍👍
Thank you for the video it was very helpful ❤️
Perfect video , looking to buy one today
Loving the video but wish you could have slowed down a bit with your camera and show each completed section.
Thank you so much!! We had the corner pieces on backwards and were losing our damn minds.
Hod did you anker it?x
Best explaining how to install compared to onther realated ones no doubt😃😄😃😃
Hey brother, I’ve watched this video like 10 times and I’m stuck on step 5. I don’t know how to correctly assemble the side wall frames. What do I do with the 2 channels & 2 angled pieces to connect them to the front & back frame?
I see that you put this shed up a couple years ago. How is the roof holding up. I am going to put on up. I am in northern Wisconsin where we get a good amount of snow. I will be putting some extra support.
Great job explaining how to assemble. Thank you!!!
Great video! How much time did you invest in the build?
By far this is the best video I have found for this shed. Thank you so much for posting!
Would it be OK if I use self tappers from the inside out? Since I have no space on the side or back due to walls being on the way. Is it possible?
Thank u it was very helpful!!!
Very helpful, Thank you!
Hey man great video. Just wondering what editing software did you ise for this video. I like how you are able to film this and have the instructions up in the corner
Sony Vegas Pro is what I use but Premier Pro would work well too
Looks good. I just did one. An wanted to see what the differences were. No rubber seal. An wasn’t sure where to use that tape. How long did it take you? I did it by myself an that’s was not such a good idea.
+++hey guys if you call it a night and then decide to continue this video the next morning please remember where the heck you're freaking left off. The next step was step 12 continued second page showing the beam brace and now I'm stuck trying to figure this crap out because the picture sucks and I was really counting on you guys to show me. Also don't be lazy show the people you actually putting the pieces together and not already having them done. You consider speeding those parts up a little.
Awesome video, very detailed
Great video It def took me longer than 30 mins
I learned the hard way guys. Don’t be ballsy, where gloves! Almost had to get stitches.
Thanks you sir I am very very appreciate your job you explained everything detail I am thinking to buy soon
Very good video
My concrete slab looks EXACTLY like yours lol it was too wet, that’s why it dries like that. Lesson learned
Nice! What kind of anchor bolts did you use?
I had this same shed delivered last week but I can't get 3 rainless days to assemble it until May 18. I'm doing it myself so it might take that long, not sure. Got the floor frame & anchors too. Anyway good info here, I know more of what's involved now.
Glad we could help! If doing by yourself, the worst part will be the walls. The less wind the better and if you have anything to hold up/ put behind the walls temporarily just in case as well.
Nice job I had problem wit the roof 1 panel came more bigger 32 and the other?
I saw a warped roof panel in the middle of the roof. Do roof panels not always line up?
Good video for installed the door, I don't understand the manual. Thanks.
Can this boy fit under a deck easily, or would it be impossible to bolt in the top screws for the roof? Thanks
Thanks for tutorial. What was the total build time?
How hard was this to do? And did it go together properly? How long did it take you.