DIY Arrow Storage Building Shed Assembly | Step by Step Guide with Instructions | Start to Finish
Vložit
- čas přidán 16. 09. 2020
- Hello everyone. Thanks for stopping by and we are glad that this video may be of some help to you if you are going to assemble your own shed. This is the Arrow Storage Building Shed that we guide you through from start to finish. If you find this video useful please show your support by liking, sharing, commenting, clicking the bell notification and SUBSCRIBING. I including links to the shed, the updated Milwaukee impact driver that we used for the assembly, and a set of Dewalt MaxFit impact bits and some gloves that would help with the assembly.
👉 Links below are affiliate links. If you buy something through this link I may get a small share of the sale. ❤️
Milwaukee 2553-21 M12 FUEL 1/4 in. Hex Impact Driver Kit with One 2.0 Ah Battery, Charger and Bag
www.amazon.com/gp/product/B08...
Arrow 10' x 8' Newburgh Eggshell with Coffee Trim Low Gable Electro-Galvanized Steel Storage Shed
www.amazon.com/gp/product/B00...
DeWalt - DWAMF30 - MAXFIT Steel Driving Bit Set with Sleeve - 30-Piece
www.amazon.com/gp/product/B08...
Milwaukee 48-22-8722 Performance Work Gloves, Large
www.amazon.com/gp/product/B01...
#arrowstorage #storageshed #shedassembly - Věda a technologie
Installing tomorrow. Drunk watching this will definitely remind me of what to look out for tomorrow!
I just finished the foundation of that same shed when I opened the instructions I was just like CZcams it is 😂 Thank you!!
I am about to build this same shed. Seeing you do it has reduced my stress level and I am looking forward to building it now.
Doing this today w my 7 yo son 🤣 thank you for this.
I'm about to make this shed, with my brothers help, and live in it as a temporary shelter.
Thanks for the how-to video.
how did living in it go?
Been following your video constructing my new shed. Thank the you for making it! Would have no hair left without it!
You’re very welcome. Glad it helped. It was one of my first videos so a few steps were missing but glad it helped you. Thanks for supporting the channel 🙂✌️❤️
Thank you I was trying to do this alone with my 14 yr old to help me. We called it a night so I could look it up and try again tomorrow. I really think we can get this knocked out tomorrow. Thank you for the help!
You’re very welcome. The content on this one was not as good as my other videos but I hope it does help you and your son tomorrow. Let me know how it turns out.
Looks like those Milwaukee tools are doing you right! Appreciate this video, took down our shed and this will be good for future reference when I rebuild the shed.
Great job guys, thanks for the information. I have a shed I need to put together and this has been very helpful
So amazing!!! I really appreciate the tips to watch for during construction.🤙
Just bought the same shed, thanks for the video it will help,
Very Very Informative!
Thanks for sharing!👍🏾👍🏾
Thank you very much for your advice it did help me alot
you guys are awesome. and I couldn’t put mine together without watching this CZcams video Thank you very much. Great job on putting the video together.
Tried installing one if these today, it was the 10x14 barn style. Never could get the wall panels right, ended up taking it back
Hey guys great video you really made it look easy to do. It sems like to me I gathered from your video is pick the right day and take your time with each step it doesn't look like a process you can rush as a doing this as d.y.i person.
Thanks for making the Video and the tips. Currently same shed and size. Though i would like to mention my experience so far in case anyone comes across this video. #1 Definitely need 2 people,#2 Not all holes line up,#3 Yes Pieces are labeled except a few and they were very hard to read on the metal parts. #4 be patient. #5 Wear Gloves they are very thin and sharp.
Very informative. Building mine tomorrow 🤪
Great! Thanks for watching and I hope the shed turns out well. All the best to you and yours 🙂✌️❤️
Thanks for sharing this video, great job!. Could you tell me if the roof and walls protect from heat? If it feels hot inside the shed?
It’s nice I bay one but I have a have a little problem but you’re video is helping thanks 🙏
wish my assembly manual was even remotely close to yours on the initial floor frame assembly! And what is with the holes not lining up?! Thanks for the post
Howdy Guys, Great video, Thanks for sharing with us. I sure like how you go into detail when it comes to the placement of both Bolts and Screws. I'm getting ready to assemble a bigger 10 X 14 Arrow Shed. The 10 X 10 that you have assembled here is pretty much the same with the exception of size and model. Mine is the Lexington LX10X14 Has the barn look. It's gonna be a challange for me to assemble cause I dont have anyone that I can get to help me. I think I can do it without help if I take one step at a time. So... Anyway thanks again for the video, it will help. Thumbs up on your video, and I've subbed your channel.
Thanks this is a big help!
You’re very welcome. Glad I could help in some way. It wasn’t the most complete video but it’s what I could get in the moment. I hope you and yours are well.
Thanks for the Video , I'm going to assemble this weekend, How long did it take you guys ?
Great 👍video thank you.
I just aak a question
If we install floor base have to be after or before ??
Thanks
Do the floor base first you can do it after but you'd have to jack up the shed and get the floor base underneath I'm currently installing one of these for the first time I built a wood frame out of 3 sheets of treated 4ft x 10ft 3/4 in ply wood and 9 10ft 2x6s I had one 2x6 left over but that's in case you have to recut something or want to put in another support for the frame I would wear gloves when handling the sheet metal it is easy to cut your self on the metal it is sharp and you will bleed after I built the frame I put it on top of cinder blocks one on each corner and on in the middle on both sides definitely a two person project but 3 wouldn't hurt and making sure the frame is square at the bottom and top is important when building the shed
I got two similar. I appreciate the video.
Building one of these you didn't mention the sealing tape for roof beams, or maybe older kit and it doesn't use it
How did you screw the walls along the back side where the fence is?
How long would you say it took you to put it together? Also, you think you should level the ground beforehand? One more question, when using the anchors, do you put them in before the shed or after?
This shed took my brother and I about 7 hours. I recommend leveling the ground if you can but if it’s fairly even already you don’t “HAVE” to do it. Just recommend it if it’s possible. From what I remember we ran the anchors in after the shed assembly was completed. Hope it turns out well for you. Don’t forget to enter my power tool GIVEAWAY. We stream it live every Saturday night @ 9pm CST. 🙂✌️❤️
Thank you for making this video.
You’re very welcome 🙂✌️❤️
18:40 Rocking that beard!
basically you just read the instructions
thank you, really needed this!!
You're very welcome.
Had to help my sister build her
GREAT JOB GUYS
Thanks guys , good stuff.
I'm trying to buy this exact one on FB marketplace so this will help if i get one, thanks 🙏🏻
How is it holding up? I don’t have a slab so I have to build it over my grass
How did you get behind the shed to put the panels up?
thank you very much great video.
How did you get the back panel on… does look that you had enough space behind
It was a tough squeeze…made it work though
With high lumber and sheathing cost I'm more into a metal shed.
I bought one but I have to put it together as well....does it come with the floor already
No floor. We assembled this one on the customers lawn as his floor.
You jumped the roof installstep and how you taped it..
Excellent Excellent video
thank you very good
Gig em guys
Iam just finished installing the floor frame but its not square. Off by 4 inches. The holes aligned well though. Can i continue to assemble the rest ??
Was your question ever answered?
I tried assembling and sliced my finger and I called it a night. Now watching this video
Got my thumb and wrist...yea...
Sheet metal is very dangerous you definitely have to be careful my top would definitely only use your finger tips as I actually build real custom metal buildings. The thinner the metal the more dangerous
I got my toes 💀
Same here
Wear gloves and closed toe shoes 👍
Gracias. Subbed!
Where are you located? Do you build these for people? 🙂
I'm currently installing one of these for the first time I built a wood frame out of 3 sheets of treated 4ft x 10ft 3/4 in ply wood and 9 10ft 2x6s I had one 2x6 left over but that's in case you have to recut something or want to put in another support for the frame I would wear gloves when handling the sheet metal it is easy to cut your self on the metal it is sharp and you will bleed they way you read the instructions helped me read mine better Wish you would of shown you putting the roof on in more detail but good video
Thank you. Yes, this was a video that we almost didn’t share because the detail and instructions along with our filming was not good but we decided to put it up in the end. Just not one of our best videos. For watching though and I hope your shed turns out great. 🙂✌️❤️
Thank you for this video! I'm thinking about giving up on contractors and putting it together myself. It's going to take a lot of time but...I'm really willing at this point
You’re very welcome. Glad this video inspired you a bit.
Sorry you have had bad experiences with contractors. Hopefully you won’t ban them permanently, it is tough to find good ones though, at least that’s what I keep hearing.
Definitely have a second person with you if possible, that will really help with putting the walls up and the roof on.
Let me know if you get it done and how it turned out. Enter my power tool GIVEAWAY if you haven’t already. I hope you and yours are well 🙂✌️❤️
If you can assemble walmart or ikea furniture or a crib from ebay or anything like that then you already possess 90% of the skillset needed. Now you just need a person willing to help you and a way to anchor it to the ground.
You might want to mention that you need room all around the shed to work on it. I'd say at least two feet. Some building codes require it.
Good point. Customer gave us the directions on this one though. If I do another I’ll definitely bring that up.
@@MasteringMayhem Looks like he saw all the screws and nuts and gave up. lol I'm in the process of putting one of these up. I should have watched your vid first.
@@bob48219 Yeah, my brother and I were talking about that while we were assembling it. Didn’t expect that much hardware for that kind of shed. All the best to you putting it together 🙂
How many hrs if you font mind me asking you? And you do need 2 people I'm so glad you said this! Thanks
It was an 8 hour plus project with two of us.
How many hours does it take for two people to assemble this shed?
I noticed u did it on grass nice im.not tryna spent more.money on makn a cement base ina try it on grass also
Where are you located? I'm in the Pennsylvania area. I have ran into big troubles trying to install the walls.
I’m in Texas. Definitely need two people for this assembly.
are you in houston though
Awesome build, thanks for the video, very informative.
Need 2' off of fence& Hurricane tie downs Required code where I live but 🤔 4 fence& Grass maint,🤗
So should it be put on a cement platform instead of on the ground?
Yes, highly recommended. I put this one on the ground per customer request.
@@MasteringMayhem is it strong enough to not blow away? How is it anchored if it’s on cement?
@@kristynedelarosa892 they sell cement anchors
I didn’t know the roof panels were all different so I got to my end piece and it hung over two inches FML
how many hours did it take you 2 guys
Great job. How much should i charge to assemble??
At least $250.
The instruction manual for this shed is so pitiful its insane. Thanks for making the video
I hear you. This job was not easy. You’re welcome.
u put the back panels up when it was flush against the fence😂
How much would you charge to make one of these I was asked to build one but I want to be fair on a price
I would charge $300 to assemble this.
If u have big fingers. Good luck the the screws
What’s the labor cost to install one?
About $240.
This shed should be on a concrete or treated wooden foundation, otherwise the floor would be a muddy mess once the rain comes
I agree, but also that depends on climate. It's extremely dry where I live so mud is rarely an issue. Snow on the other hand... 🤔
Do still have page?
How does it take to out this together?
What?
What are actual dimensions of bottom perimeter frame, please?
Not sure. It’s been a long time since I did that job for the client. Sorry. 🙂✌️❤️
How much did you charge if you don’t mind me asking ?
Oh man I wonder what issues may come up from no foundation, I guess instant corrosion
How do you get the vedio to the start
Roughly what’s the estimated build time?
Took us both appx. 6 hours.
Did anyone add ventilation in their shed?
My instructions don't have any of these labels thankyou
So the inside is growing grass? No platform.
Not sure. I assembled it for a customer. Haven’t seen it since we assembled it. I’m think there’s not much sunlight in there so the grass would be minimal.
I cant believe you guys don't have on gloves
Did everyone skip the sealant step? This is the second video that skipped it. 😂
No sealant.
How much do you charge for this?
I no longer assemble those. I charged $300 for that when I did it though. 🙂✌️❤️
It will take you 2-3 days to build it by yourself. What a pain.
I watched to see if I could get tips on final roof and top cap assembly but the video skips from Step 13 to after Step 15 is completed never showing any of that assembly.
You show what the next step is then you show when it's done but what about the procces!?
It was one of my early videos and I was learning a lot then. I missed a few steps. 😔
Where is your floor?
CAN YOU SHOW HOW TO DO THE FIRST STEPS I AM STUCK WTF
I got stumped at the door.
Hope you figured it out in the end 🙂✌️❤️
you also skipped step 11
My mom's shed doors do not slide that easy. I will look at them. The shed is 20 years old.
Get momma a new shed
@@JohnS-gf4sz I bought her many things that helped her over the years but she has passed.
You skipped stage 12
Your first mistake is using the instructions. A real man doesn't need 'em.
JK :)
Seth Davis Piano I was told a real man can admit when he doesn’t know something 🙂🤷🏻♂️. It was great talking with you the other day.
I do this all the time just to go back and read the instructions 🤣🤣🤦🏻♀️
LOL, I've tried that one many times and ended up reading the manual 🤣🤣🤣
Garbage sheds an an incredible pain to build. Avoid at all cost.
Time waste video. only showing book. That is already with the customer.
Useless. Too fast and didn’t actually show steps
Horrible video.
It was early on. Learned a lot since then.