Beginner's Guide to our Co-Axial Center Indicator (303-3300)
Vložit
- čas přidán 12. 09. 2024
- 0.20" Axis Offset Range Co-Axial Center Indicator Set: bit.ly/38TEbMM
ABOUT THE PRODUCT:
Our co-axial center indicator provides a simple and accurate method of finding the center on a bore or cylinder of a workpiece or fixture in a milling machine or lathe.
-Indicator body completely enclose the indicator to provide more rigidity compared to other imports
-Critical surface precision ground finished to minimize runout on the indicator
--Internal capacity range is 5/32 to 12" diameter and external capacity range is 0 to 12" diameter depending on the feeler
-Operates at any angle, vertical or horizontal, internal or external
-Indicator remains in fixed position facing the operator while the spindle rotates
-Measuring Range: 0.200" axis offset
-Dial Reading: 0-50
-Graduation: .0005"
-Speed: Max 800 rpm
-Locating Accuracy: .0002" from true center
----------------------------------
CONNECT WITH US:
Instagram: / sharstoolco
Website: www.shars.com/
800rpm??
I like it. I bought it. Looking to save time when centering the rotab on the mill.
Well that was a waste of time…👎