$2500 Yamaha Banshee. Too Good To Be True?
Vložit
- čas přidán 16. 06. 2024
- I buy a 1995 Yamaha Banshee for cheap. Is the deal too good to be true?
#Banshee, #350cc,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
That guy was just all full of BS. "I don't use brakes", RIGHT! I would pull that top end and check it. There is NO WAY that engine was rebuilt.
He was high as a kite
I said the exact same thing there's no way that engine was rebuilt it would fire off on the first kick if it had been
@@staind288 I was literally going to say the same thing. Lol
Thats how people are the brakes don't work but he never used them so it's not a big deal yeah f that I need brakes on everything that moves so I can stop it when I need it to stop
I don’t use brakes
One thing to look for when Banshees won't cold start is that the float bowl is on the correct carburetor. The bowl with the jet in the bottom must go on the carb with the choke, otherwise the choke will not function. People tend to switch them up during a routine carb clean and never notice it.
I used to do the same thing when I was younger, and had a lot of fun doing it. Road trips for quads, bikes etc, fix em up and sell the ones I didn't get attached to. Great hobby, great videos. I watch them with my young sons, little do they know they have two lt50s that need a little work coming their way Christmas morning!
Best dad ever there gonna love those I had a dad like that growing up some of the best memories you can make riding with your boys 👍
Going to be an epic Xmas morning for your boys. My daughter and I ride, when we picked up her 50cc viper we had to do some work to get it running, she loves it so much though worth every penny
Awesome dad have fun and teach them young
Just recently found Joe's channel!!! Love it, for all the knowledge he shares with us and the awesome people whose comments let me know there are still good people in this world. Hope your boy's enjoyed the bike's you got them for Christmas!!!!
That dude sounded lit! The prices on the big bore quads is just insane. Reminds me of shopping for a diesel truck this year. I didn't buy one because I knew they were all overpriced. Now they're coming down again. Hopefully ATV's follow suit. If you're flipping machines don't forget to account for your time spent searching classifieds, driving to and from a purchase, licensing, fuel/lube, insurance. We need to get good deals on purchases or it isn't worth doing.
Buddy was super sketchy. Bet shes stolen
This
As long as you have a pink slip
Bill of sale or not, police can still take it if it's stolen.
That happened to me. Went to register a 04 sportsman 500 h.o next day the cops showed up and took it. I was out $4500
@Michael Curley your right it would.
You riding in the deep snow just spinning and having a blast really brought back my memories of doing it too. I felt the wind and all the smells and feelings!! Great video!!
Love the videos buddy ,were proud to see how far you have come on the channel and in life your doing awesome keep up the great work !
One of the first videos in a while I was here right at the beginning. Ive been waiting for this for so long. Love the banshees you used to have
PRO TIP: When looking at used machines, prior to personally starting said machine, place your hand on the engine to check to see if it had already been running.
Thats not a pro tip its something everyone does
@@mrsandman5679unfortunately it is not. I've had to stop buddies from forking over money for a bike that was very obviously warm prior to the buy. People get blinders when a big purchase is looming, so it isn't uncommon for someone purchasing their first atv/mx and not even look it over.
I do this with everything I buy. Cars, quads, sleds. All of it.
@@robspear03 yeah the blinders can get even an experienced person
yup and still i forget to do that... and i have bought like 20 quads...
u still will forget stuff and get home and be like FUKKK i didnt look at that and see that there more problems then i wish... but then again i buy cheap shit and never perfect quads...
@2vintage Can't believe you picked it up recently I've been watching all your old banshee videos
I was looking at that same banshee, but I'm glad I didn't go through with the buy because I'm looking at my buddies now and his is heavily modified and because your having a blast with it, love watching your videos, unfortunately I'm late with my comment
I know you say it doesn't look so good but $2500 for any banshee is crazy good. Even if it's in pieces
You really should be doing leak down test on the older 2 strokes. Could have 150psi in both cylinders for a hot minute if you’ve got an air leak. That was a score of the year. Respect the machine
Hey joe I watch your videos regularly you’ve been doing a long time love seeing new content keep up the good work lol tell Charlie he needs to come be in a few more vids too it be nice to see the ole 125r and your cr250 out ripped when it’s warm again
Back in the day, we used to put screws in the knobs of the tires for traction. We used to cut the screws shorter than the knobs (obviously) . The hex screws made the best traction. Great videos, bro.
Hey I just wanna say I look up too what u do you inspire me to work on quads and keep up the good work man have a good day
You 100% can just bypass the TORS (Throttle Over Ride System) with no issues at all. Also, you were correct in where the VIN should have been.
yeah that thing is stolen 100%%%%%% LOLZ
Joe your riding is getting much better aswell as your mechanical skills sick content brother
you have the best content full down to details , i learn something new everytime i watch your videos. inspirtation for sure ! do you sell the quads and bikes you fix or just keep them ? you are the type of guy i would make a pruchase wit no question very honest and trustworhy salute to you
You were spot on where that vin should be at, I'd be suspicious if that is a stolen bike, hope all will be good
Nothing like a ATV that sounds like a chainsaw! Brings me back to my early 90's days!
I cringed when Joe cut that factory harness to make the headlights work. I would of found the correct plug and cut the headlight wiring but anyways I would love to own another Banshee !!!! good find Joe
You always finding these gems that is why I love Your channel so much bro 👊🏻
Gem? Ummm...
That guy was lucky to get $2500 with no VIN. There are very, very few people who will buy a quad with the VIN scratched off the frame or want to do a full swap to a new titled frame.
You'll meet the break in time just going 50 feet in that snow. Those Banshees look like a lot of fun to ride
Ain’t nothing else like them
You should get a set of Maxxis 4 snow tires for winter snow riding. Makes a world of difference for two wheel drive sport quads!
"I don't know, I never use the front brakes. I was assuming they did"(worked). 🙄 Oh yeah, the rear brake is defunct as well!🤷🏽♂ "I down shift it(changing the subject)I... I actually traded two quads for this... " Who needs brakes, right? "Like I said,(did he?)I smashed my truck so I'm getting that out of impound today" Is this guy for real? Do not trust any information he has to offer.
Air filter has to be (hose)clamped to the intake.
Sounds like he was hitting the whiskey bottle first thing in the morning 🤣🤣
“I never use the…burp…..engine”……🍻🍺🍻🍺🍻🍺
Pull front plastics, should be a vin tag in there. I think you should find it and run it through NCIC. If we suspect that we do every time. Had 2 last year that we recovered for a guy. Were stolen out of his driveway trailer and all. We got both quads and he left the trailer, so clean sweep. He came out to my shop to verify it was them and started crying. Felt good to help, and we repaired them both.
Great buy, now I am kicking myself for not going after that same quad.
That chain has a few hours on it. Spotted a couple locked links. I'd check to see if the sprockets were replaced and the old chain kept. When the friction areas between the pins and bushing wear and make the chain appear to have stretched, which it doesn't do, using it on new sprockets will quickly wear them out. Still watching and think someone's gonna have a blast with it when you're finished with it.
Time to try out the snow mobiles. I told you where you could buy some cogs for the Ski Daddler in that video I looked them up and they sell them. ! Never fear Ski Doo Sprockets out of Dennis Kirk...Work great on my Daddlers
Great Buy,love the videos keep them coming. Always a joy to watch your progress. 💯👏
Great job!! Expert negotiation and fixer upper!! 🎉🎉🎉
Great get and more great content. You have your fare share of arm-chair quarterbacks in the comments on each vid, but realize they just want what you have in most cases. Keep doing what your are doing and let the second guessers and "experts" rage away....
That bike is STOLEN!!!
Joe is having to much fun!! Make a path with your new 4 by 4 quad. That thing is sick too.
If you look back at 52:40 of the video, you can make out a few digits of what might be a part of a vin number. Amazing what a camera lens can pick up that we don't see when looking
Best CZcamsr out there! Keep up the good work!
Check underneath the plastic where the handle bars go into it at for the front end steering like on dirt bikes.& Bicycles to. Honda stamps their vin numbers in that area a lot to. As long as it's on the frame.& It's clear vin you can titled it as well.
Good one . The garage is getting full time to sell off some of the stock . You need a small pole barn at the house.
just nice watching a pro at work. I am not into bikes or snow machine ( live in Florida) but I met you could work on a jet ski
You don't sandblast off a clean VIN number - about 99% chance there's a shady past somewhere in that Banshee's history.
Yup. 99.9.
@@robspear03 I'm shocked at all the comments of "What a great deal!!!". Lol. VIN-less quads are as hard to sell as vehicles with salvage titles. That seller was lucky to find someone willing to pay $2500 for it.
Pro Tip: If a guy states that top and bottom have been rebuilt, check for those green gaskets. Quick way to tell if the case has been split.
If I didn't pay or do the rebuild then it's just hear say. You can never take someone's word. It's an expensive mistake.
Not oem gaskets most of your green gaskets are trash and leak i wouldn't buy a wuad if i noticed green gaskets at the price they originally asked once noticed
Always loved the sound of that dyno port 2 into 1 pipe
In my personal opinion the Toomey T5s sound best
Tommeys sound the best of the twins I think. The two into one just screams on top like nothing else
First time I heard that 2 into 1pipe deffintly has a nice sound almost like a sportbike motor sound but 2 stroke..
@@jeepwhitesides1678 yes definitely sounds like sports bike or almost like a rotary
I was just going to say there should be a grease zert on the rear swing arm!! I no mine did because I had to replace a couple times after falling out!! You definitely want to keep it greased up for sure with all the movement it sees!!! That banshee definitely sounds pretty good on video I thought!! I would definitely find a different pipe though!!!
I’m liking the comments before the video even starts!!!😂 I love this channel!!! The comments give me a preview of what to expect!!!😂😎💪
No powerband sounds as nasty as the banshee powerband. Excellent video, homie! You found yourself a ripper 👊
Hey man, really like your videos. Keep it up!
First time watching your videos and I must say your work is impressive dude Nice Job
On the 1995 through 1998 the vin numbers are on two places on those where you looked at already.& Where the handle bars go in at to. Like on Honda trail 70& up dirt bikes have on them.
Pretty good deal on that quad cool to see you talk him down. Good thing it runs good to can't wait to see you open it up and see it Rip👍🏼👍🏼
Love banshees my dream quad next to a quadzilla 2vintage should totally buy a set of paddle tires and throw them on the banshee and make a Sik vid of him rippin it on the land!!!
Doesn’t seem horrible. A running banshee for 2500 isn’t bad. Has some goodies on it. Compression seems good! Just needs a little love it’ll be a good one
Hey Joe, what are those oil pans you use. I dig them and have been looking for them at multiple sources.
On the header pipe if your wanting to clean it up try using SOS steel wool pad sponges and on the plastics they make a spray Called SC1 gloss overcoat that would make it look new again
Hey man I was hoping you'd ride one of the snowmobiles now that you have all this snow. I live in Florida and I don't get to see snowmobiles.
I had one way back in the early 2000 with the same color scheme!!! Absolutely a blast!! I would end up going down to little Sahara in Waynoka Oklahoma!! I would go down there for the rattlesnake roundup!!! Tons of fun for sure!!!
Great job and lucky on top of that. fantastic price for that machine but for winter get another set of rear wheels and mount some swamp fox tires on them. Should be 115 mm bolt pattern, same as warrior but a few oddballs might have a 156 bolt pattern if it's very early.
Congratulation.
You are selected as a random lucky winner of a giveaway,chat me at telegram to claim your package 🎁🎁
2vintages right leg gotta be huge kick starting all these machines
So excited to watch your videos that guy was clueless and didn’t know anything You should build the banshee motor with a 421cc 4mil stroker be a awesome video 😎
Man what a Score. My next buys are 250R threeWheeler and a Banshee. She just need some TLC.
Great vid man!…. You never told us if the vin came out or not lol
VIN straight got removed. Yamaha VINs are on that lower left frame rail. Safe to say then, it was stolen at one point. Who else grinds a vin off for any other purpose
When I used to ride in the snow in my younger days,lol, I used to let some air out of the rear tires for a little extra traction. Sometimes it worked but not every time!!😎💪🇺🇸
Always happy when Joey posts
First one I’ve heard revs out properly, nice .
Enjoyed the video as always! Lucky buy! If only it always was that simple! Gota say it tho’ i wish you would buy a brake bleeding kit and watch some videos! Get a vacuum pump or a syringe for reverse bleeding! It would be way more satisfying watching you get all the air out and do it properly! Sorry but true 😂👊🏻
Keep them coming! 👍🏼👊🏻
I like to pick back up and check play in axle. Shake those front wheels for play along with a arms. Im a big bearing checker when buying. Check air filter tells how it was or is maintained. I bought a Raptor 660 project- did a 686 big bore all mechanical is new. Soon be plastics and powder coat frame etc.
Prices are up along with parts so my 6 projects are on hold.
What were the electrical connectors that were unplugged on carburetor? You never mentioned what they did in the video. Just curious. Great video on a really PURPLE quad.
Those look like my Warrior headlights. 2000 model year. Very similar parts to my 2000 warrior and I think some timberland parts would work too
I don’t use front brakes…she rips!!! But not sure if the guy broke it in, you may want to take it easy for 8-16 hours lmao
Never seen or heard a banshee with a 2 to 1 exhaust it sounds really good!
Thats how he got the truck impounded it HAD NO BRAKES! lol
Little tip, i know the brakes dont work on this one, but when you are unloading a quad,,if you stand on the right hand side you can control the front brake and end reach the rear brake with your hand if needed
What an awesome machine. Looks like you made a good deal. That thing rips. Makes me want to see it with some scooped tires in that powder.
That dyno port pipe was most likely built by a guy name rich Daley out of newyork about 2 hours from me he owns dyno port pipes and builds some crazy things he does snowmobile pipes as well builds some nasty mechines.
I live in Wisconsin! I was literally looking at the same CB350 that you were awhile back.
Glad I didn't pick that thing up, eh?
crazy to see how much these banshees are going for these days.
So stupid to see people asking so much for clapped units. I wish I could go back 10 years 😂
@@fudgeman333 youre not kidding. its hard to find a running banshee here in pa for under 3k.
Banshees are like 8 grand in ireland 😅
@@Simpsons.R.S 3k?? Damn here in the uk you're pushing well over double that 🤣
@@darraghwalsh1230 😅😅 maybe i should ship some over there 😂
That 2 to 1 expansion chamber sounds so good
Nice quad!!! Sounds great, make another video please after snow is gone.
Yessirrrrrrrrr finally thank u for putting this on the channel love it
Last one we worked on in my shop, the guy that owned it found an aftermarket oil cap wit a dip stick on it.. kinda neat.
Those banshee top ends suck to replace, getting both pistons back in unscaved can be a bear. Great compression.
They make an adapter for the airbox so you can mount the filter without having to use the lid. Get the throttle thors override kit. And a vacuum gauge so you can sync the carbs.
The tors can be bypassed for free.
The chokes on those carbs sometimes don't stay out and retract each time you kick. I had to hold my choke with my left hand to make sure it would start when cold.
Is it really bad to over fill a motor with oil? I heard you mention this in the video. I have a 2000 xr 250 and the dip stick always seams low or nothing showing when I proper amount of oil in. The bike holds oil in the frame and there is a process for checking it. I follow the procedure, but it always seems low so then I add more oil. Am I causing a problem? Any help or info I would really appreciate thanks. Love the chanel been watching and a subscriber for a couple years.
What are some tips you guys recommend when buying used quads im looking to buy one February thanks in advance.
Snow hits the ground and you ride Quads. No snow you ride snowmobiles.. LOL
love the Videos
I had a snowmobile with a dyno port exhaust they sound almost the same just missing that echo braaap snowmobiles do
Also. Being that the carbs were not plugged up for the sensors may be the reason for it being kinda hard to start.
I think I speak for everyone when I say you deserve a nice 509 monosuit for your winter shenanigans 🙏🏼 and probably a nice set of riding boots! How are your feet and head not freezing without gear?!?
The infamous banshee Kickstart rattle lmao every dam one I've owned or have seen rattles lol
I never use front brakes. Lol, 70% of your stopping power!!! Great buy tho! 👍🏽🤙🏼
Wild that guy just tried to feed you line after line like that. Who in tf would ride without brakes 🤣🤣🤣
Once again Joe gets a killer deal. But I would tear down the engine and check it out, because on the first start up it didn't sound right. Now I will continue on the video. But The Deals Joe gets is Incredible. Oh maybe it didn't sound right because of the 2 into 1 header pipe.
Most likely you’re right and the brakes were a huge issue for me. You can’t ride a 2 stroke without brakes man. Engine braking is terrible for 2 strokes.
Hopefully the vin wasn't grinded off, and painted over... anyway, that thing sounds SOOOOO GOOD!!! Reminds me of my old banshee with T-5s. Might have to go get one just so I can have that noise again
When he was doing burnouts it sounded like it was doing like 18000 rpm lol. It sounded like one of those nitro rc cars
I've seen these go for way more, this is a steal! I've always heard from a family member to break things in hard to they are hard to break. Followed this rule and it's never failed me yet 🤣
Literally a steal by the looks of it.
Worth the amount all day here in fl a claped out one is 3500 to 4 grand so great deal. For the price good content
Hot damn! That exhaust is fire. Brraapp. Sounds like a highly molded hot saw. Fricken steal for $2500.
that thing sounds crazy, good pickup for sure
Bet that thing is stolen. Vin doesn't come off without a grinder. That dude was shady AF. And he wasn't rebuilding anything. If he was capable of doing that , he'd had those brakes working