How to enable/disable selective unlock on BMW using instrument cluster menu

In this video I will show you how to enable/disable selective unlock for doors on your bmw e9x car using on-board computer menu.
If you have selective unlock enable, when you will press first time the unlock button from the key, only the driver door will be opened and to open all doors you need to press again the unlock button.
To enable/disable selective unlock for doors, you need to follow the next steps:
1) You need to be inside the car with all doors closed.
2) Insert the key in the key slot.
3) Activate ignition mode. (by pressing start/stop button without pressing the clutch (for manual transmission) / brake (for automatic transmission) pedal).
4) Press this little round switch, of the signal lever button in down until you can see in the instrument cluster display the icon with a key and a check mark.
5) Press "BC" button from the signal lever to enter in the submenu.
6) Use the little round switch, of the signal lever button to scroll through the menu until you can see a sign like a car door with 4 lines in right side, under this sign is configuration for selective unlocking.
7) Press "BC" button from the signal lever to enter in the submenu.
8) Press this little round switch, of the signal lever button in down/up to enable/disable selective unlock. Here you have 2 options:
- all lines in an oblique position, this means that all doors will be open at the first press of unlock key button.
- only line for driver door in an oblique position, this means that only driver door will be open at the first press of unlock key button and the rest of the doors will be opened at second press.
9) Select what you prefer and press "BC" button.
For more videos, please see my channel: / @bmwems
----WARNING------
You are doing this on your own risk.
I'm not responsible for any damage on your car.

[@adriangomez2754]

Thanks dude, your videos are awesome