Everytime I watch one of these CZcams "DIWhy" life hacks, I always have this little voice in my head saying: "Finally, this time I won't be disappointed". I still have yet to not be disappointed.
i was thinking hes making a oil filter wrench or sum n was like ok that makes sense, but then i realized its too small and couldnt figure out why he put the two nuts on then the next clip came and i facepalmed fr
For when you have no adjustable wrench of any kind, no actual chain clamp, no kind of universal wrench, but you do have a bunch of hardware, a power drill, and a perfectly sized drive chain. Very practical.
Вызывайте доктора, у нас тут пациент. А если серьёзно то гайку, которая от руки откручивается, эта приспособа открутит проблем. На большее либо прочности цепи не хватит, либо это будет соскакивать с гайки.
Quarantine boredom at it’s finest. My husband got so bored during the early pandemic that he started making grills & smokers out of old propane tanks. They’re actually really cool, work really well, and people always ask him to make them one.
What situation are you gonna be in where you won’t need the chain that your using all while having access to the rest of the tools except the wrenches.. lol looks cool though
Такое хорошо использовать на непредсказуемых нестандартных гайках где крокодил неподлезет или магазинов нет,а руки и голова есть)))Нестандартный метод выручает...как палка что раз в жизни стреляет.🤣
Это решит проблему ! Иногда гайки " прикипают " к болту , и без помощи специальных инструментов , смазки , механической помощи или нагрева не обойтись ! Эта вещь реально сможет помочь решить проблему ! p.s. её сделать под силу абсолютно всем , и причём без затрат , чем и займусь в ближайшии дни ( вот только цепь нужно будет поискать )
I could actually use something like this to hold a drive shaft while I removed an impeller off of a pump. I'm a pump mechanic. I use a chain wrench but sometimes it slips off. This could be useful. I will make one and test it.
Or...just hear me out.....get a wrench 🤯
these are for iron pipes and shit you can't get a wrench around because they're round. idfk why he made it so small and demonstates it on a nut lol
Nifty end of the world type shit
I wanna know more about the threads...
@@schlomoshekelstein908 just use chain oil filter opener more convinence,why go the hard way if have the easy way
@@schlomoshekelstein908 you have wrenches for that... Pipe wrenches 🤯
Jesus Christ....I can't wait until Funk FPV sees this one!
Wada oi
I was thinking the same thing
This one ain’t bad tbh lol
@@Anthony-dw8bg same
Lol I was thinking the same thing
All that prep work to remove a loose nut. 10/10
se no se mi devo se se9999 se no se
There's no way making this improv wrench was less difficult than the nut removal. There is no hack here
Everytime I watch one of these CZcams "DIWhy" life hacks, I always have this little voice in my head saying: "Finally, this time I won't be disappointed". I still have yet to not be disappointed.
Так вот древние люди мучались, но потом инженеры придумали гаечный ключ ☝️
Накидной
Розводной и газовый
Головки торцевые
Very well spoken
Так себе затея. Цепь слабая
Это называется когда коту делать нечего он яйца лижет.Для гайки умные люди придумали ключ,не бдагодарите🤣🤣🤣
“Channel locks have left the chat”
“Literally any tool that’s adjustable has left the chat”
“Chisel and hammer has left the chat”
Зз ззззззззз ззз ззззззззз зззз
For this example.
Fingers have left the chat.
@@kjpierson1152 hhhhhhh
@@purohitramesh76 LLLLLLL
When you smoke a bowl to solve your one missing wrench problem
And make a one size fits all wrench
Damn dude you should sell those. I've never seen at tool that could undo nuts before. That's so cool 🦶
Agreed, but be sure to patent it first so no sneaky thieves take your inspiration...
My wife undo mine ☹️
Can't wait for our favorite tool reactor to make a video on this
neither can I lmao
Me neither
i was thinking hes making a oil filter wrench or sum n was like ok that makes sense, but then i realized its too small and couldnt figure out why he put the two nuts on then the next clip came and i facepalmed fr
@@billycaudill8600 ñ0b
Good old fashion wrench works for me
Y-you made an adjustable wrench that to at least an hour
Коту делать нечего,он яйца лижет.
ڑ
Точняк
Покрасить в зелёный цвет, и положить в траву, что б не кто не нашел.
That is the funniest comment I have read in a while, thanks!
For when you have no adjustable wrench of any kind, no actual chain clamp, no kind of universal wrench, but you do have a bunch of hardware, a power drill, and a perfectly sized drive chain.
Very practical.
Wrenches are hard to come by where you are, I take it?
Well... he used a long nose plier to tighten the square nuts.....
Where we're going...we don't need no wrenches...
Ajustible wrench already exists.
That’s why it’s called a hack
Nice to see McGuyver got his life back on track and recording hacks again.
То есть взять простой или даже газовый ключ, это уже не работает?
What did you use to tighten down the clamping bolt?
Someone has invented pliers and wrenches for that
Love this. Easiest oil filter tool ever
Meanwhile, me with a $2 Harbor Freight wrench...
-g
I can tell by the fingers this man has called my phone 36 times this month
Вызывайте доктора, у нас тут пациент.
А если серьёзно то гайку, которая от руки откручивается, эта приспособа открутит проблем. На большее либо прочности цепи не хватит, либо это будет соскакивать с гайки.
Главное пластилиновый метал
У конструкции нет жёсткости. У доктора есть разбор подобного.
Wouldn't an adjustable wrench be easier?
Но на практике гайки встречаются в ограниченном пространстве,где и обычный ключ не повернуть....или торцевой или накидной
Это пригодится когда руки не лезут. На примере снять нижний крепления стартера
Пулат не дашь взаймы?
Ingenio y Creatividad de un buen ser humano. Gracias MAESTRO
Kreatip,sekalisodara,itu
For me a wrench is easier to buy than a winged nutt.
Quarantine boredom at it’s finest. My husband got so bored during the early pandemic that he started making grills & smokers out of old propane tanks. They’re actually really cool, work really well, and people always ask him to make them one.
Осталось покрасить и бы бросить.
Excelente enseñanza 👍 👏
Да тут все 250 Полуляхов из 250.
Аыбросить на...й
That nut is loose and your contraption will obviously work
Try loosening a bolt thats tightened down
And then you see it spinning
What situation are you gonna be in where you won’t need the chain that your using all while having access to the rest of the tools except the wrenches.. lol looks cool though
Зовите Дохтора, тут Нобелевка не иначе! 😆
What a colossal waste of time!
Wrenches or an adjustable wrench they even have long handles so you can get some torque on it.
Все гениальное просто!!! Никакой заморочки !!!
Такое хорошо использовать на непредсказуемых нестандартных гайках где крокодил неподлезет или магазинов нет,а руки и голова есть)))Нестандартный метод выручает...как палка что раз в жизни стреляет.🤣
My God, this man just invented the wrench!
it's never a reasonable DIY when you have good tools and use them to make lesser quality tools
Куда, Доктор Дью подевался? Для него тут, пациент!
Да тут если честно смотреть не хрен 200 полуляхов из 200.
Try making fingernail clippers and a fingernail brush.
Very nice bro
Amazing news! You mean I don't have to use a wrench anymore! I can just make one of these? 😂 lol
Всегда удивляло то что у человека есть дрель,пассатижи,молоток,керн и тиски. но нет рожкового или накидного ключа😂
Это решит проблему !
Иногда гайки " прикипают " к болту , и без помощи специальных инструментов , смазки , механической помощи или нагрева не обойтись ! Эта вещь реально сможет помочь решить проблему !
p.s. её сделать под силу абсолютно всем , и причём без затрат , чем и займусь в ближайшии дни ( вот только цепь нужно будет поискать )
What’s next? We turn a flat head screw driver into a chisel?
This is genius.
Used a flat head as a chisel as a kid once. Got the bollocking of my life from my dad. Never made that mistake again.
Excelente idea una herramienta para varias medidas y cómoda y más segura de utilizar..felicitaciones amigo
That's cool. I'm never going make one but it's still cool. Thanks.
СРОЧНО ДОКТОРА! ТУТ УЖЕ 250/250 !!!
КАЖДЫЙ СХОДИТ С УМА ПО СВОЕМУ . ДАЙТЕ ЕМУ ГАЕЧНЫЙ КЛЮЧ .
** Hb
Желательно сразу разводной. Дыба более не маялся херней всякой)))
@@user-vj4pl3bm9g gh ghr pr tu kya kr rha tha na ki tu to to be able to to the same thing to the world world of of project to be able?
Or I could just use a wrench or socket that I paid good money for
Bruh it didn’t even seem tight enough to need a tool-
Show,valeu mesmo.
Pretty ingenious. One wrench to rule them all. 👍
This might work for an oil filter. As long as you don't plan on using the filter again cause the chain might dent it up.
Интересно, а чем он гайки закручивал? Или, чтобы сделать гаечный ключ, нам нужен гаечный ключ?
Em caso do mundo ir para merda. Isso realmente é útil
I like these, "what would happen if " videos.
Wow, but why not use a wrench ?
Так.... Стоп. А накидной ключ ещё не придумали?
The amount of likes is frightening
Бесполезная безделуха! Торцовый ключ-всему замена.
Hallo Herr Müller
6
А терерь покажи как ты будешь полностью прикепевшую гайку откручивать
If Mr. T made you a wrench out of these bits and pieces, you'd treasure it.
Very unique idea for mechanical technician. I really appreciate you thank you so much
Bruh
This is clean af
Essa unha já levou muitas marteladas kkkk
Этой приспособляй только Лего собирать )))
この手の動画はまじでこれいる?ってやつしかないな
Блин компот, у нас что гаечные ключи закончились....
Lmao idk what he was thinking when he made this video.
Закисшую гайку этим не отвернеш.
Эту гайку можно и пальцами открутить)
Thank you for this idea
Excelente idea. 👌
Неужели так сложно было перед видосом ногти постричь
Great idea I'll use it to remove my bike oil filter😂
judging by his left thumb, he uses his right hand when using a hammer
Thats kind of cool! Now use it everyday.. on stuff that isn't already broken free or easily accessible. Lol
ИЗОБРЕТАТЕЛЬ ВЕЛОСИПЕДОВ
Very nice
This guy probably thinks socket sets are for dummies lol.
Did anybody else do this when they were a kid?
Видно по ногтю хорошо приложился на днях
Как все это прочно выглядит
Механик! Руки грязные не омываются!
Солнце,воздух,онанизм укрепляет организм.
So you don't have pliers,wrenches,vise grip,channel locks or a multi tool 💀 ☠️
Um gênio.
parabéns.
В Москве столкнулись
А как добывается электричество? При чём тут экология? Всю норвегию поимел илон маск
Let me guess. You ran away from Cuba 🇨🇺. 🤣🤣🤣
Этот барашек сделан из пластилина, никакого усилия не выдержит, плюс ослаблен отверстиями и резьбой. Покажи что откручиваешь закисшую гайку.
Making a wrench during Medieval times or Ruzzia.
I could actually use something like this to hold a drive shaft while I removed an impeller off of a pump. I'm a pump mechanic. I use a chain wrench but sometimes it slips off. This could be useful. I will make one and test it.
Toda esa historia para aflojar una tuerca, cuando es mas rápido con una llave
ну эта хрень как бы универсальная, под разные гайки...
Dude this This cool