DJF 4.0 Canon PTZ - User Guide

davidjoshuaford.com/companion/
Control Canon PTZ Cameras & ATEM Switchers with Stream Deck XLs, wirelessly via an iPad, or remotely over the internet using this custom-built Companion Profile.
Designed for Canon CR N100, N300, N500, and N700 PTZ cameras.
Additional options to control Blackmagic ATEM 4ME/2ME/1ME Constellation HD/4K/8K, 4ME/2ME/1ME Production 4K, 4ME Broadcast 4K, 4MEs, TV Studio Pro/HD/4K, Television Studio HD8/HD8ISO/4K8, SDI/Mini Extreme/ISO, SDI/Mini Pro/ISO switchers • DJF 4.0 ATEM Control -...
Chapters
0:00:00 Start
0:00:18 Menu Navigation to PTZ Pages
0:00:42 Selecting Cameras
0:00:52 Page Settings
0:01:12 3x 6-Camera Banks for 18 addressable PTZs
0:02:05 Manual Camera PTZ Control
0:02:36 36 Recall Positions
0:02:45 Drive Mode Speed
0:03:09 Time Drive & Reposition Modes
0:03:50 Drive Time Mode
0:04:07 Loop, Gang, & Preview/Program Modes
0:04:39 Adjust Menu
0:04:58 Turning Camera and Module On/Off
0:05:13 Integrating with ATEM Switchers
0:05:33 Where to get the PTZ Profile

[@NickFromNetherlands]

Thanks. A dedicated windows/ Mac computer for Companion app must be on 24/7 to control Canon Cameras this way all the time.

[@davidjoshuaford]

Correct, on the local network. Or a Raspberry Pi. And you can run multiple Stream Decks and iPads off the 1 companion installation

[@user-kr6hu2bi9x]

Hello
I am using CANON CR-N300 / CR-N500 as a Companion.
I recently upgraded the firmware and the speed control for ZOOM In / ZOOM OUT in Companion is not working.
It zooms in/out very slowly.
I would appreciate it if you could improve it.
For reference, when I asked CANON, they said that the CR-N300 & N500 firmware cannot be updated to the previous version.
I tried to update the firmware to the previous version, but it didn't work. ㅠㅠ
Latest version V150 / Previous version V140
For reference, the latest version only has the basic function of autotracking, which is inconvenient. ㅎㅎ (Full version is $1,200)
Presets and other functions work normally.
Thank you.
Companion 3.3.1 /canon v1.5.0 /CR-N300/ CR-N500