Hi J, stunned at the pellet accuracy. I have a King (600mm) which is standard, no tweaking. Definitely going to try pellets in the Superior Heavy barrel after watching your short clip
great video!!i saw in the intro that the reg was pinned at 180bar what settings do you recommend to reach the 80fpe max mark?? reg at 160??? 180?? i have the 600 22cal and hoping to get 40 grn slugs going 11140fps . i just want to know if the rifle can handle that , then ill keep it around 940fps
Actually the still photos are just there for the intro no bearing on the actual reg pressure for the video which was actually 80 bar I don't see you been able to push a 40 gn slug at1140 fps on a 600mm barrel let alone a 700mm barrel Also you risk damaging the valve stem running higher Reg pressures and using the heavy Tungsten hammer The FX has an Achilles Heal that been the valve stem cannot handle the Heavy strike it causes the back of the valve stem to Bulge if us have ever used a Heavey hammer at home striking a chisel to break concrete you will see after a while the end of the chisel coming into contact with the hammer will start to peen over well the same thing happens to the valve stem where it makes contact with the hammer . This cause a bulge and at some point it will cause the valve to stay open and jammed up Until FX resolve this issue I would advise not running a High Reg pressure and using the Tungsten heavy Hammer
@@AfricanAirOrdnance Great info, I’ve heard of the impact m3 producing 1140fps with 40gn what’s the secret? The tungsten hammer? Is there a stock upgrade spring that helps to achieve this from Fx? is this Jeremy?? Hey I also need a kit for my evanix Rex p .50 . Can you help with that?
I am awaiting my fx dynamic. Yours are always the best, concise reviews. Thanks, pastor Greg
Thank you
Parabéns pelo vídeo. Muito bom.
A nice rifle set up there sir cheers from u k
Thank you for watching
Hi J, stunned at the pellet accuracy. I have a King (600mm) which is standard, no tweaking. Definitely going to try pellets in the Superior Heavy barrel after watching your short clip
No more stunned than me
Hi very nice groups. What did you have the regs etc set to for these pellets? I have the 600mm version coming soon Thanks.
It was around 80 bar
great video!!i saw in the intro that the reg was pinned at 180bar what settings do you recommend to reach the 80fpe max mark?? reg at 160??? 180?? i have the 600 22cal and hoping to get 40 grn slugs going 11140fps . i just want to know if the rifle can handle that , then ill keep it around 940fps
Actually the still photos are just there for the intro no bearing on the actual reg pressure for the video which was actually 80 bar I don't see you been able to push a 40 gn slug at1140 fps on a 600mm barrel let alone a 700mm barrel Also you risk damaging the valve stem running higher Reg pressures and using the heavy Tungsten hammer The FX has an Achilles Heal that been the valve stem cannot handle the Heavy strike it causes the back of the valve stem to Bulge if us have ever used a Heavey hammer at home striking a chisel to break concrete you will see after a while the end of the chisel coming into contact with the hammer will start to peen over well the same thing happens to the valve stem where it makes contact with the hammer . This cause a bulge and at some point it will cause the valve to stay open and jammed up Until FX resolve this issue I would advise not running a High Reg pressure and using the Tungsten heavy Hammer
@@AfricanAirOrdnance Great info, I’ve heard of the impact m3 producing 1140fps with 40gn what’s the secret? The tungsten hammer? Is there a stock upgrade spring that helps to achieve this from Fx? is this Jeremy?? Hey I also need a kit for my evanix Rex p .50 . Can you help with that?
@@dironizareyes596 yes can definitely help with the Rex P 50 www.africanairordnance.com
Never seen a FX push 40 Gn at 1140 FPS but have seen a AGT Vulcan 3 do that
@@AfricanAirOrdnance the impact m3 can with apparently some kind of mod
Hi good day nice video. Do you question? Barrel liner heavy(1:16) or superior(1:24)? 700 or 600mm?
Its 700mm liner that FX installed in the rifle I no longer have the rifle so I cant pull the liner to see what twist rate it has
@@AfricanAirOrdnance I tested it and it doesn't beat heavy, pellet superior anyway.