How to replace the Marantz 2230 fuse lamps
Vložit
- čas přidán 1. 03. 2013
- this receiver needs the lamps:
6x fuse bulbs 29mm 8v 250 ma ore led 8v 1w
5x bipin 8v 40ma
2x bipin 6.3v 40ma (6v 40ma) t1 1/4(for the stereo indicacator)
1x dial pointer 8v/40ma 4.5mm
and the normal fuse bilbs
Things to know when you have one of these superb sounding machines.
Subscribe on my channel. - Věda a technologie
Wish I would've seen this video before trying to replace mine first time around.. I quickly figured it out, but would've had a much easier time seeing this first. Surprisingly, not too many 2230 tech videos out there, which is a shame. Thanks! - Cheers
agreed, strange there aren't many 2230 tech vids! just picked one up at an estate sale for crazy cheap and decided i would learn how to service vintage marantz. fingers crossed more videos start popping up!
I think going through the front and removing the front face and using an exacto knife to remove the face plplate. I removed the vellum and bought new vellum on ebay for $7.55. Once they were removed you can easily remove the bulbs from the front....thank you for showing how you get them from behind
the music makes it seem like the laboratory of Count Chocula. I expect Frankenstein is lying on a table just out of camera shot.
ROFL!!
One usually has to spend time in a funeral home with weeping vampires to hear such musical sounds....
very helpful, thanks! would love to see more videos on service for the 2230 specifically. anything you can offer would be very helpful!
Just got the LEDS in, 20 mins and looks great and easily done thanks to your video! 👍
The easiest option is to access the dial lamps from the front. This way also allows you to easily clean the faceplate, the dial, and replace the original vellum paper.
Thanks again for these great vids.
Hello there! I´m a big fan of your videos! Thanks for taking time and help us showing how to do it. Do you have a video on how to replace bulbs for the 2238b. If not can you give a detail of the lamps and fuses I need like you did with this one. Cheers!
Can you make a Video on how to change the Stereo Indicator bulbs
Hey! je bent lekker bezig man!
Thank you, Sir~~~!!!
vintage stereo , don't know how you changed all the bulbs with removing that resistor near the tuning dial end, i removed one side of resistor and finally was able to replace all the lamps, anyways thank you for posting
Hey can you help me out I have a sansui 5050 receiver and the lights for the stereo part that has all the numbers the lights will turn on and off when using the receiver not all the the lights but on the end of it will work sometimes and then it will also turn off during use of the thing is it a bad contact between the lights inside or something else worse? I just got it from good will by the way.
+Aaron bilger the bulbs are good, have to bre a loose contact, ore a bad solder joint
Another great VIDEO 👍🏼 I bought a black 2226 and i must replace 1 fuse light, i heard that Euromaxx 8v LED’s are good, costs 1,79€ Each, do you know if the 2225 and the 2226 has the same fuse lights Andrew, cheers Ché from the Netherlands
Does it matter if my original fuse lamps are 7 Volt and all I see is 6.3 volt and 8 volt and 12 volt will it work fine if I use a 8 Volt fuse lamp? or even a led fuse lamp?
+Aaron bilger i would stick on the original values
hello.. i have a question are these fuse bulbs the only fuses for the amp or is there other fuses? and are the bulb fuses the power fuses?
+Justin Snyder no just 8v 250ma bulbs, original it was the 8v 200ma but those aren't sold anymore
zie mjn andere berichten op de kenwood 3400, in principe is de kenwood erg makkelijk te repareren, zodra je de voltage en ampere weet van de lampjes die erin moeten is het simpel en die weet je nu...
I've tried this yesterday, I guess the lamp fuse I got where defective. When Turned on after replacing, got some smoke from the lower front, turned it off immediatly. Removed the fuse, turned it on again, and everything is fine, all lights work, but the dial ones. Don you know what could I've burned out? thanks
+Mariano González Dayán what was the voltage and ampere from the replacing bulb ?
Super gave site en info!!!
Vroeg mij af of de cybernet cr-110 de moeite waard is om op te knappen?
zou het niet weten van de cybernet
So the five 8v are for the tuner, which ones are for the meter?
+the radical kindness the vu meter use the same lamps
I was trying your method of replacing the dial lamps, but those two screws are really hard to get at.. I was thinking that drilling two holes in the plate where the dial pointer rests on over the screws would be a good way of accessing them. .How did you get at those screws? - Love your videos by the way
no drilling, just use good tools.
vintage stereo
I Found a much easier way to replace those dial light "Fuse Type" bulbs" - From the front panel - easy access and very easy to replace. The plastic dial and diffuser velum came off really easily and went back on with just a touch of glue..All you have to do is remove one screw under the Signal Strength Meter and Bobs you uncle.
How can I change the red stereo light.Do you know how
Ricardo D Gonzalez this bulb you have to solder in, a bi pin t1 1/4 size.
At 00:45 you breezed by pretty quickly the removal of those two screws on either end without explaining that they are almost impossible to get to.....
Hi I want to order fuse bulbs for my Marantz gear, but cannot find the article in on-line electronic shops (like Conrad.nl). What's the official (dutch) term to look for ?
+Ha Ns this is the cheapest in the netherlands. Most other shops ask triple this price special if you order 50 ore more: cellux.proflamps.com/nl/product-details.php?p=18700400100931
+Ha Ns sorry igave you the wrong address, these are 8v 300ma bubs, you need 8v 250ma bulbs, these 300ma will melt the plastick housing rom the bulbs.The good address is: www.elektronica-online.nl/
when you are there go to: licht&geluid....lampen.....lampjes laagspanning......and there you wil see Pilotlampje 8V - 250mA - €0.80 incl. BTW
ok, thanks for the advice
How much would it cost to have this done
i think about 50 euro
@@vintagestereo what would that be in dollars lol.
ik zie nog geen kenwood.
oke
music could better match funeral).. thx for video though!
YW
lolness
hello.. i have a question are these fuse bulbs the only fuses for the amp or is there other fuses? and are the bulb fuses the power fuses?
+Justin Snyder I don't know if some shops calle them power fuses....8v-250ma = 8v-250ma, can't make it something else from.