During lockout the 2 momentary modes is the lowest ramp in smooth and stepped ramping. Yours is the same because you have the same floor in both modes. You need to set the floor higher in the mode you don’t use. Then you’ll have 2 momentary brightness
The auxiliary lights are configurable and can show the battery voltage. They can also be turned off, as can the switch. Worth looking at a manual for Anduril 2.
RGB switch can be used for battery status, as well as the RGB aux lights.
During lockout the 2 momentary modes is the lowest ramp in smooth and stepped ramping. Yours is the same because you have the same floor in both modes. You need to set the floor higher in the mode you don’t use. Then you’ll have 2 momentary brightness
The auxiliary lights are configurable and can show the battery voltage. They can also be turned off, as can the switch. Worth looking at a manual for Anduril 2.
7 hold changes the colors 7 clicks changes dim bright flashing off on your auxiliary lights
U can definitely turn it off 7 clicks