Carburetor Tuning To Get 40 KMPL Average / Mileage
Vložit
- čas přidán 5. 09. 2024
- Carburetor Tuning To Get Ideal Average / Mileage
Carburetor Parts Detail
Float Chamber:
The fuel level is controlled by the fuel floats and the float valve. The floats are hollow and are made up of a material that will float on fuel. The part of the float processes against the float valve, called the needle and seat. Most of the times the float valve needle is bendable so that you can adjust the fuel in the float bowl/ chamber. All plastic floats are not adjustable.
Pilot Jet:
The idle jet controls the idle, this screw leans or riches the fuel mixture for a smooth idle and up on one quarter throttle. They affect the mixture as long as the vacuum in the venture is over them. As the throttle further opens, the vacuum moves the needle jet and jet needle.
Throttle Valve:
The throttle valve is the big slide that opens and closes the throttle, it has a bevel angle cut in one side of the big round slide, towards the air cleaner.
Jet Needle:
This needle rides the throttle slide that goes into the needle jet. The jet needle controls the mixture from 30-80% open throttle. It will come in different sized tapers. The top end of the jet needle has grooves cut in it, usually five, you can move the clip up to lean the mixture or down the needle to increase the richness.
Main Jet:
This controls the mixture from 60%-100% open throttle.
Proper Tuning Method:
Warm up the engine well before you begin the process; take the bike for a good 10-15 minute spin. Do not leave the engine under idle for 10-15 minutes because the results won’t be very effective. Now you will have to look for the air fuel screws. You will notice that there will be two screws, one for the idling rpm and the other for the air fuel mixture.
Set the idle speed adjusting screw, clockwise to increase the rpm and anticlockwise to decrease the rpm. The optimum idle range can vary from 900-1200 rpms. Now adjust the idle screw to a mixture by turning the screw so that the engine runs poorly. Then turn the idle screw clockwise until the engine begins to grumble, keeping the positions in the mind. Set the idle mixture screw halfway to obtain the best idling position. Now the engine will run under a lean mixture.
Various stages can be noted by looking into the tachometer or by just listening to the engine's sound. The RPM at this state will not be steady. Start turning the fuel screw 1/8th turn at a time. The RPM will slowly increase and become steady. In fewer than 5 full turns, the RPM will become constant. After this point screwing must be avoided, this can be the best setting for the engine. Trying to screw more the mixture will become rich and the fuel efficiency will start going down. Repeat the process for best results. When the engine is properly tuned crisp throttle response and decent engine sound can be observed.
If you really want to get the best results, try taking the motorcycle for a spin after every adjustment you make, this way you can choose the most optimum performance settings for your engine.
Carburetor Tuning To Get 40 KMPL Average / Mileage
Carburetor Tuning To Get 40 KMPL Average / Mileage
Carburetor Tuning To Get 40 KMPL Average / Mileage
Carburetor Tuning To Get 40 KMPL Average / MileageCarburetor Tuning To Get 40 KMPL Average / MileageCarburetor Tuning To Get 40 KMPL Average / MileageCarburetor Tuning To Get 40 KMPL Average / Mileage
Carburetor Tuning To Get 40 KMPL Average / Mileage
Carburetor Tuning To Get 40 KMPL Average / Mileage
Carburetor Tuning To Get 40 KMPL Average / MileageCarburetor Tuning To Get 40 KMPL Average / MileageCarburetor Tuning To Get 40 KMPL Average / MileageCarburetor Tuning To Get 40 KMPL Average / Mileagev
Carburetor Tuning To Get 40 KMPL Average / Mileage
Don't Forget to LIKE, SUBSCRIBE, SHARE & COMMENT
This video will really help you.
If you need any suggestion or help, Comment me on comment session and i will reply you as soon as possible.
Thumps up if you like my video.
Suggest me the Video and i will make the video for you all.
SUBSCRIBE NOW FOR MORE VIDEOS
Thank You for Watching My Videos
"Ride like a Beast"
~-~~-~~~-~~-~
Please watch: "Royal Enfield Full Service At HOME - PART 1"
• Royal Enfield Full Ser...
~-~~-~~~-~~-~
बहुत अच्छा और सरल तरीके से समझाया है भाई।
Thanks brother
Thnk u sooo much guru it works for my bullet electra 43+kmpl Im so happy.
बिल्कुल ठीक जानकारी भैया जी
धन्यवाद जी
Thank you brother mai abhi wahi krha tha aur abhi aapka video dekha toh ek idea aagya hai uske bare mein 😊
Very informative vdo.....!!!👍👍👍
Very informative vedio sir ji and useful as well
Thanku soo much
Most helpful trick..
Ap sahi position of mixer screw nahi Bata saka.For a new Kamar it is deficient to understand exact tuning position of mixture by hearing engine sound.
First tight mixture screw full tight clockwise then gradually move it anticlockwise only 2.5 to 3 turn only then adjust the throttle screw minimum so that engine will not stop.Then you will get 38 to 40 in city and 48 to 50 in highway.
Air screw and throttle screw
First adjust throttle screw to raise idling and adjust air screw to get high idling and bring down the throttle screw to lower idling where it stop in slow speed
Very useful information
Achchi jankari di bhai ,thanks
Wo chik chik sound normal he kya bs6 vali bike me bhi aa rahi he same.
Apne anticlockwise gumake Kiya different nice
Commet kuch samjh nahi aya bhai ??
MATLAB yeh ki mixture srew Ko Anti clock wise gumake setting Kiya woh
Thank you very much good experience
Great nice job keep it up
Thanks brother
very useful video bhai
Thanks brother
This is lean mixture tuning. Will engine be running worse? Or will it be better? Will there be more wear n tear
Bhai high altitude par kaise carb setting hogi? Matlab air intake kam hone se kaise set karein? For example leh ladakh ride?
Thank you..
bro please make videos on how to change clutch and accelerator wires. Will the same spare wire work for both?
sure brother but dono wire alag hoti h
Shark silencer free flow hai!???
Ha bhai free flow h
Bro good and nice videos
Bullet Guru💪
Sir ye aapki bullet se bhi tappet noice arhi h same meri bullet se bhi aati h ye hatt skti h?
Bhai BS4 mai itna sound hai he, ye kam nahi hoga
Sir max pickup ke liye kya setting karun?
Try this
@@BulletGuru sir yeh thunderbird 350 x pe kaam karega?
Bro plz tell ...if cluth plates damage hone se milege drop ho ga
yes brother
engine performance sahi nahi hai to mileage bhi effect hoti hai
SIR WHICH SILENCER SHOULD I USE I ON DAILY BASES INDORE OR PUNJAB .BUT I LIKE BIG SOUND .BUT PUNJAB SE AVERAGE KAM MILTA HE
SIR PLEASE SUGGEST ME I HAC CHEKCED U TOO MANY VIDEO'S
Sir Mere pass 350 clasic bs 4 he, mene usko abhi recently purchase kiya he, mene jb wo gadi li to uska city me mera mileage 40 k.m. ka tha lekin abhi kuch time phle se wo 30-33 ka mileage de rhi he, ap kuch suggestust krenge
Tuning check karwo, carburettor clean karwao
Company recommended 2.5 full turn
Bro agr 1.5 se 2 tak kre to koi nuksaan hoga jaa nhi please tell me
Missing hogi, thik se chalegi nahi bike
sir ek baar carb ka petrol cut off krke....check krke btao ki kitni der tak on rhi bullet use stop watch mine is 3.46 minutes
Bhai or sb to bolte h ki ki mixture nut ko clock wise side m tight krke 3 full round anticlockwise krde ho jayegi tunning
Mujhe mera classic me45+ milta hai, haveto open mixture screw only 2.5 turns
Keep it up 👍
Thanks
suddenly I started to get 45kmpl on my thunderbird 350cc bs3. I reduced rpm only... before watching this video
Nice bro
After 2nd service mere bullet standard ki average 28 km hogaye hai
Jubki 1st service kai baad 33 the
Ulta kum hogaye hai kya is setting sey theek hojyga sub ???
bhai ek bar try karo
In my Classic 350 BS4 fuel is leaking from this Canister... Can you please tell me what could be the problem?
Twining set krne ke bad v mileage kam de rha h kya kre sara filter v new h
Ignition system check karwao
Thunderbird ideal mileage kya hona chahiye bhyya ?
Carburetor ka nichawala hissa ma aak pipe haa uska kam kya hae???
bhai hmne 350 bike ka carborator saf kiya or full service bhi kr di ab bike first kick start ni ho rhi h bhut kick k bad start hoti h kya problem hue hogi btana g
Engine rpm increase after 20~km ride and engine sound has some tik tik sound
brother its common in BS4 model
so don't worry
Sir will it effect engine because petrol flowing quantity will be less no so?
Why u think, it will effect engine?
Agar petrol flow kam hoga to combustion sahi nahi hoga, engine mai koi issue nahi hoga
Ye aapne bs4 engine m krke btaya h?
Ha bhai
Bhai isse kuch problem to nhi aayega na bike ko?
मेरी classic 350-BS4 है 2018का मॉडेल मुझे अभी भी 44-45km/ltr milega मिलता है
Sir carb tuning jo apne dikhayi cold engine par ya kuch samay chalani bad adjust karna.also plis suggest good spark plug for classic 350 bs3 I'm using stock silencer.thankyou
NGK ka best ata hai spark plug or tuning ap kabhi bhi karwa sakte ho agar apki bullet thik average nahi de rahi ho to
@@BulletGuru thanks once again.best channel for bullet lovers
Thanks brother
Sahi hai bhai
royel enfield classic 350 fuel jet pin number??
Iam using thunderbird 350 bs4 2017 model 10000 km only runned. I done regular service in re service center only. But iam getting a mileage average 20 kmpl only in city and 25 kmpl in city. Kindly suggest to increase my mileage , how many turn of screw will give best mileage.
Same here bro
I change my carburetor and my Electra giving only 32kmpl m driving only in city
So it can be increase
Sirji, RPM kitne rakhna chahiye? Aur afr screw ko full tight karne k baad 3 full turn open karna he kya ye sahi he?
500 to 700rpm rakho
Or 3 jada ho jaega 2 ya 2.5 round bhi sahi h
Bullet Guru great 👍
Bullet Guru one more thing sirji aapka mail id batado ek discuss karni he.
jitendra.singhyadav26@gmail.com
3 full turns is perfect for classic 350 bs4
Ignition bar bar off ho to kya karna chahiye??? Or ye hota kyu he ??
bhai CDI ya spark plug ka issue hota hai bhai
👌👌
Bhai vo srew bhar ki taraf jam hoo gaya hey kai karu??
Ye sb kb krna shi rhega .....mujhe bike liye 2 months ho rhi h kya mai kru ya avi engine ko petrol peene du thode din tk
kabhi bhi kar sakte ho bhai
after 1000kms
Aachha Guruji eya kaam haam 3 rd serviceing k wad Kare ki new bike le aanek ke waad vi karsakte hay.plz boliega.mera bike Avi 6 month huya hai.me karsakta hay Avi🙏🙏🙏🙏
kabhi bhi kar sakte ho bhai ye setting
@@BulletGuru ok..Koi problem nahina hoga...
Guru g...my standard is only 3 months old and 2200km ridden only...... before'sometime bike have given 32kmpl.... with chota Punjab silencer...but now bike is giving only 25 kmpl....why ..plz reply .....
brother fuel & ignition system check karwo
Bhai meri electra bs4 2 turn per hi sahi rpm pakd rhi hai mielege 50se upar hai engine ko nuksan to nhi hoga plz reply Bhai. Corboreter cool rahta hai silencer se bhi cool Air aati hai. Plz bro reply plz
bhai koi issue nahi hai but 2.5 turn karo
47 setting kiya kabhi Throtal kar rahe ho 3.5 rakho
Hi bro nice vlog
Is this tuning only for bs4 models or even for bs3 models???
bhai ye mene BS4 m kiya h wase to ye dono ka same he h
Milege to thik h par bhai starting ki dikat de rhe y bike
Bhai mera 2015 350 cc std bullet miss maarta hai mountain area mein .aur air filter ki taraf patako ki awaaz aati hai .
brother mountains m tuning change karni hoti hai carburetor ki
@@BulletGuru kaise ?
Kuch log maine wire lagatey dekhe hain .carborator mein .
Par only setting kya hogi mountain ki
Brother my thunderbird driven 2200 kms but in the odi metre It is showing as 27 average mileage. And I have taken this bike from my friend and he said he done the service before giving it to me. But I am not finding any improvement in mileage
I drive 60 to 70 at 5 th gear not more than that can you advise any solution to increase it ?
70 to 80 best milage or drive in 40 to 50 ,,,,,60 to 70 not must milage
Bhaj mere classic 350 me bend pipe filter nikal di he kya use mileage kam hogi
Nahi bhai koi issue nahi hoga
Bhai ye tere bullet ke engine se jo jese bhi sound a rahe a vo normal hein
Bhai es setting Ka bad bicke koebe be problem nahe aya kaya
Nahi bhai koi issue nahi hota
Electra 2013 model
Black smok aa raha hai...
Carburetor ka flot pin atak raha tha bar bar..saaf karke lagane ke baad bhi problem arahi hai..
Kya karu ?
brother petrol m issue ha ek bar pump change karo
Bullet Guru thnk you..🙏🙏
Fuel cok new dala hai...ek bar fresh oetrol per check karta hu...tank rust se bhara pada hai...matmaila jaise petrol ka corol ho gaya hai...koshish krta hu fresh petrol dalkar
Can I have use setting in my thunderbird 350x
yes brother this setting is for all carburetor bikeq
Bhai ji please help pehla jisi tuning kisa kru wapis jisa company kr k dati h. Hol or Nut bolt ko bilkul flat kr k kitni chudi tight kru pehla jisi tuning krna k lia. Bike class 350 Bs4 reply fast
bhai company se he karwa lo
jada sahi hoga
Bhai wanna share a video with you, how to connect!
bhai instagram pe msg karo @bulletguru_youtube
Oil filter kab change karne ka
bhai 7 to 10000 ke pas change kar dena chahiye
Bhai koi silencer btao jis se pataka na bajtA Ho
Or sound b loud ho
Bhai esha koi silencer nahi h jo loud ho or pataka na ho
But quality sound chahiye to beat use karo
Short Punjab laga lo
bs4 Mai itna tik tik sound kyu hai bhai mujhe bikul awaz nhi chahiye ek video Banao aur manual decompresser Laga sakte hai ya nhi classic hai 350 bs4
sure brother
Sir mera to 30+hi de rhi H bas 2020 model h
BS6 hai
my bike avg was 34 n it dropped to 25 after engine oil change. .. n after turning also it's not improved. ..
brother show this issue to service center & clean spark plug & carburetor
okay Bro but wat problem do u suspect? ?
Bro hlp me..mai tuning kiya tha bt tab se mera pickup low hogya nd uncomfortable ride feel ho rha h..can u tel me how 2 set dat...mai nut ko pehle tight kiya fully uske badh 3 turns loose kiya tha..ye sahi h ya galatt??
brother ye sahi h but ek bar ache mechanic ko dikha do sahi rahega
Ok bro thnq
Carburettor turning Karne se bike ka koye problem ho rha?
Nahi bhai koi issue nahi hai
Mere group me 5/6 bs4 he or 2018 me li hue he or 1 problem he ki vo ruk ruk ke chalti he or kabhi to bandh pi pad jati he plz ispe video banaye
Sure video banata hu bhai
monster rider timing chain ga plud ka be msla ho skta ha ya kese wire ka
Mera bhi same problem bro
Petrol he tank me fir Bhi ruk ruk ke chalta he resorve lagne ke tym me jaisa hota he aisa chal Raha he
Megapgone with filter we need video help
Sure brother silencer search kar raha hu jald he video ayegi
Bs4 me Kam krega ki nhi
bhai ye BS4 he hai
Bs3 me bhi ho sakte ha kya
bhai same he h dono ki setting
Hi sir ji
Mere bike me Tappet sound pahile se jyada aa rahahe ise kuchh problem jayega engine me
Bhai aj tapping par video dal raha hu ek bar dekho
Fir bat karte h
Ci or uce engine hai...dono ka tareeka alag hai. Tappit noise ka
Bahi pick-up Ka koe be problem nahe hoga na
nahi bhai koi issue nahi hoga pick up ka
Good informative video Bro. I have a Gunmetal Grey Classic 350 & have set the air knob to 3 rounds/6 half rounds...with around 960 rpm...hope this should give a good average...your thoughts on this please....
yes u have done right tuning
Bullet Guru Thanks for confirming Bro...have a trip scheduled this weekend...will update you with the mileage
Bullet Guru Mene ek mechanic ko pucha...usne kahan shayad oil filter mein carbon hone se Tappit pe oil nahi jata aur awaaz aata hai...koi idea????
@@priteshangre1592 what is your milage now
@@priteshangre1592 hi apka milege kitna a Raha hey
Bhai mere screw hi toot gaya hai
Bhai 2.5-3 chudi open Krna hota hai oil and air ka ratio hota hai please read manual.aisr toh engine pe effect padega jaise apne btaya hai.
Thank you for ur comment
See this video - czcams.com/video/DcFIThSpq_A/video.html
👍👍👍👍👍
,👍...
Sir i bought classic 350 bs4 4months back ..Completed 3000kms ..i'm using shark silencer..
I'm getting a mileage of just 25/ltr ..
Can u please suggest me ..how many turns i have to rotate ??
brother bhut kam average h
tuning se itna fark nahi padega ek bar RE service m average check karwo sahi rahega,, abhi engine new h acha average dena chahiye
Bullet Guru ....i don't know hindi bro
brother you are getting 25/ltr mileage is too low
kindly contact to service center for the solution bcoz you bullet is new
new bullet average should be around 35kmpl
Bullet Guru ..ok thank you brother
Vamsi Ambadipudi did ur mileage problem got solved ?? Coz I am also facing same problem
Sir maine ek video me dekha tha jisme usne 7 round kiye the complete ....h3 says ki free flow k liye ye shi setting hai ...and he claims average of about 70 kmpl with it ...he proves it with video on his channel
But i am confused with it as everyone says ke 3.5 or 3 complete rounds correct hai but this guy claims 70kmpl average with 7 complete rounds
Is that setting correct?
If no ..then please help me with correct setting for free flow exhaust(long punjab) for average🙏
brother NOT possible to get 70KMPL average by doing tuning is carburetor brother i dont know konsi video dekhi h but ye misguiding hai brother mene jo tuning ki h wo mujhe 38 to 40KMPL deti h jo company bhi claim karti hai
Bullet Guru sir you can watch by yourself ... channel name is auto badshah and guy name is prabh
See that carburator tuning video
Fo watch that video whenever you get time ...he has proof video also with 70kmpl with freeflow custom exhaust.
Karan Soni karan meri b fat gayi thi uska video dk k yar bhsi aida kaisr ho sakta hai 70 sala chutiya bana diya lagta usne sbko video edit kr k
Karan esha ho he nahi sakta mene dekha hai uske video but wo galat hai
so plz ignore this brother
Bullet Guru ok sir👍🏻
Plss btana bhai
Meri classic 350 19 model 3500 km done but giving mileage of 25 in city after how many km I should wait for better mileage
Hello...i own bullet 350 standard uce...problem is bullet wont go beyond 60km speed.....heavy vibrations...pls tellme the solution
yes brother ye common issue hai bullet m
@@BulletGuru so any solutions?
brother use RD 350 Handlbar 20% vibration kam hai
I appreciate your honesty friend. Most people lie that they ride at 100kmph.I also faced this issue of engine not going beyond 60 kmph. I opened the throttle screw slightly by quarter turn.it helps. The pick up will build up slowly and u can ride up to 80.
Sir mixtures ki kitne turn hone chaie 3 turn
ha bhai
Petrol kitna dalwaye????
Bhai 11lts tak bharwao
bhai apke engine mein Jo sound aa rhi h woh aati hi h ya koi prblm h....
Bhai ye meri bullet nahi h frnd ki h
Or ye normal h kabhi kabhi ati h bas
45tak mileage deti hai...setting pata honi chahiye
40KMPL ka degi brother
45KMPL chahiye to uske liye bhut sare factory kam karte h, wo bhi sahi hona chahiye