Video není dostupné.
Omlouváme se.
The New 2024 IKEA PAX Wardrobe - Step by Step Assembly
Vložit
- čas přidán 18. 08. 2024
- We have been debating on the best way to make the most of our bedroom wall to maximize storage space. Shon could build a custom closet but that would require a lot of sanding and painting. The IKEA PAX Wardrobe was an ideal solution to customize the space with readily available products. We watched a few videos to help get tips and tricks to assure easy assembly but…. SURPRISE! We got the NEW PAX Wardrobe with no videos to view for a reference. So we hope this video helps you with your assembly and makes your life just a little bit easier!
Assembly of Interior Closet:
The New 2024 IKEA PAX Closet; Basket, Drawers, Shelves, Hanging Bars, Doors, and Door Pull Assembly
• 2024 IKEA PAX Closet; ...
#diy #ikea #pax #closet #wardrobe #assembly #build #life #tinyhouse #cabin #new #newvideo #construction #challenge #home #house #custom #customclosets #organize #space #viral #viralvideo
Adding to the chorus - this video was a lifesaver. Thank you so much!
Those are such kind words! Thank you! Glad it was helpful! 😊
Thanks - this is the least fluffy and most helpful one out there. I really appreciate you taking the time to do this.
Awww, thank you! We are super happy it helped. 😊
Imagine my surprise when I opened my ikea pax to this new design. I tossed the manual and just watched your video, which was more helpful. Thanks a lot! Honestly, you're the best I've seen. If you showed a video on how to build a car, I think even I can follow it and build one.
Best compliment ever! Thank you.
Thank you for making this video. The step with the crowbar was especially helpful. Not sure I could have figured it out without your help.
Yay! Glad it was helpful! 😊
Yes, as I sit here at Ikea to get a replacement part bc my piece broke!
@@bkira22 oh no!!!!!! I’m so sorry! That is super frustrating
Thanks for the tip about that bottom trim piece getting caught and using the crow bar. We were stuck there!!
We are so glad it was helpful! 😊
This was amazingly helpful! Thank you so much for taking the time to film this and edit this together. This made it so much easier for me to assemble my Pax system.
@@Ladyroundrock yay! We are so glad you found it helpful😊
This was so helpful. We could not have done this without your video. IKEA should pay you. Thank you!!
We are super grateful it was helpful! Thank you for your kind words!
Wow!! This is SO GOOD! I can't wait for part 2 so I can add the sliding doors! Thank you so, soooo much! 🙏🏼🌸
I am so glad it was helpful. We didn’t do sliding doors… but hopefully there will be something you find useful! 😊
This was so helpful. We would have never been able to do this without your video. We flew through assembling 3 with your help. Thank you!
That is awesome! We are super happy it helped! 😊
I can't believe you just posted this yesterday!!! I just bought a PAX last night and went to assemble it today. I was expecting the old style of assembly and was shocked when I saw the one piece construction with the 3 walls already together. You could not be more correct when you say the instructions are useless!!! I spread out all the parts and tried following the instructions without success. Horrible instructions! It seems like this is a new type of assembly because I could only find your video that shows the new PAX assembly. THANK YOU!!!!
@@Majerly_Annoyed absolutely! We are so glad it helped! We couldn’t find any videos on the new one either so we figured we could help others and hopefully minimize the contributions they need to make to their swear jar😂🤣
@@r-ranchadventures FYI...the whole video saved my life but I have to tell you, your tip at 10:40 about using the crow bar to gently pull on the doohicky so the front piece will fit was possibly the greatest tip of all time. I hope everyone putting together Pax 2.0 find yours video! Thanks again.
@@Majerly_Annoyed awww, that’s awesome! Thank you for the kind words and we are so glad it helped!
Nice cabinets! It will definitely gives you plenty of storage!
Thank you! It’s amazing how quickly it is filling up😳
Perfect I just bought a few of the new ones. I have more to buy as they come in stock. I was hoping to start this weekend. Your video is very helpful. Thanks
Absolutely! Best of luck! Hope the video helped. We will release a second video on Friday with all of the inside assembly 😊
I would say the most important parts are were the holes line up at the top. Video is very helpful - if you can add is standalone picture of alignment that would be fantastic
@@jessicavictores9086 I am glad you found it helpful. Can you be more specific of what alignment you are looking for?
@@r-ranchadventures I think meaning the alignment of where you hang the rail itself
@@sdophoto1405 the rail goes from side to side with a gap on each end the thickness of the side walls. The measurement from the floor is 91 7/16”. Hope that helps😊
Thank you, I was lost without this video. My back and side pieces came separate which seems odd .. One piece was the 2 back flaps connected to the right side, and the left side was packaged separately. This caused a slight gap in the left side corner. While it shouldn't be noticeable since I'm installing shelves, but if you have any tips for connecting I'm all ears.
Sounds like you have the previous generation, the one we thought we were getting. Unfortunately we can’t give any insight as we have not worked with the previous model.
Curious we installed the rail after the fact following a different video. Not convinced that is the easiest. How many inches or cm do you leave to the start of the rail?
@@sdophoto1405 the thickness of the side wall.
Would these have to be disassembled if you ever wanted to move them?
Unfortunately, yes. They are secured into the wall so at a minimum, you would need to disassemble the top
I need to cut about 6 inches off the bottom of the back panel. Is that possible without comproming stability?
Are you cutting it from the top, the bottom, middle? All the way from edge to edge?
@@r-ranchadventures want to make a cutout for my hot water baseboard heater. I saw that there are circular holes in the back panel. I guess I would cutout above them somehow. Definitely don't need to go to edges of side panels. I may not have to cutout 8 inches maybe just 4 for the grill or I'm thinking of drilling holes possibly.
I dont think these new wardrobes are in UK yet
@@louisebtsxxx3496 I am sure they are coming….. so easy (once you figure it out 😂🤣)
Just built two Pax wardrobes last week in the UK and still the old style.
@@fabianmckenna8197 hopefully the new ones will be coming soon…. So much easier!
We have this new style but I didn’t get the metal wall bracket in my package…unless I threw it out by accident 😮
@@movealgarve it is just a thin bracket so I can see how you may have accidentally thrown it out… but it is always a real possibility that it may have been left out of the box. But I would definitely get a replacement before the install.