Love the Wilson grip module on my 320 Rx , installed a apex flat trigger,with olight light and is now the perfect home defense weapon. Shot freehand at 15 yards and 2 in groups all day long. My only problem was the factory mag would not fit in the magwell had to grind the little wings off the mags to work, the only thing I would like to get is some 21 round mags for it.
@@slippynipz I had the same problems with my magazines from P320 Full Size. Older type Sig Sauer factory magazines (marked as Sig Sauer on the base plate) had thicker sides on the base plate. The newer magazines marked with cirkular logo SIG, don´t have these problems, perfectly fits in Wilson Combat Grip Module.
@@janvodros8238 Yeah my 21rd mags have no issue with the square plate and my 15 with the thinner mag flares on the bottom of the well. The normal 10 rounders do not fit in the grip module
I love both grips the legion grip and the wilson but I'm really starting to like the Legion grip more because the weight and the Organomics but I still like the wilson but for my hands the legion grip is really good to me
I think one thing worth mentioning about the Wilson Combat grip that you didn't cover is how much narrower it is than the X-Carry grip, and how much it tapers in width from the front of the grip to the rear. The result is that the backstrap is quite a bit narrower than the X-Carry grip's; it might even be half as wide. I guess I can see why Wilson Combat did that -- the backstrap really digs into your palm and that may help with recoil control. Personally, I did not like how the Wilson Combat grip feels in my hands and sold it. I much prefer the uniform width of the X-Carry grip from front to rear. The only thing I might change on it is to add the factory grip weight.
I have both wilson combat, and p80 grip module for the 320,the wilson combat is hands down the best,my p80 mag release was wore out in about 20 mag changes ,because the p80 mag release is solid polymer, the metal mag wore out the polymer mag release so bad the mag would fall out during recoil,or shaking the pistol ,stay away from the p80 grip,until they change the mag release the metal,
When I replaced my P320 XCOMPACT with WC Grip,I have noticed my trigger is kinda loose.Aside from that it’s nice and better than the original grip.You’ve convinced me to replaced the original grip.No regret.Thank You for the Video and honest review as always.Be Safe.
Thank you for or the great feedback. Much appreciated! If it’s loose definitely reach out to Wilson. It might be a flaw in the mold of your grip module and they might replace it for you.
I just bought my P320 today. I am interested in this grip module. Even though I have large hands, I like a little slimmer grip; makes mag changes easier for me.
You know what they say about guys with small hands lol. I love my Wilson grip and the 2 tone with the FDE slide and black grip is gorgeous. Mine has the delta point pro and a streamlight tlr 1 hl. Perfect home defense gun. Will be getting the apex flat trigger soon.
Oh neat. Was hoping there was a video showing the carry grip on the stainless steel slide. Glad I found it. The stainless steel slide doesn't seem to be very common. Glad I managed to pick one up. Thanks for the video decided to get the gripp :)
I was excited to be able to install the Wilson module, it felt good before installing it, but once it was installed and tested at the range, I didn't like it. Main reason is because I have large hands, my accuracy was terrible with it also. Just a personal thing with me I'm sure, I reinstalled the SIG module and I'm hitting the targe again.
Thanks for the great feedback. I always like hearing from owners. I have medium size hands so it’s good to hear your perspective having larger hands. I’d be curious to hear what your thoughts are on the axg model since the panels can be replaced with larger grips.
Can I presume that this grip module will work on the sig p320 xcompact rxp as well. I enjoyed the vid. Very informative. May just try the module based on this review.
Thank you for checking out the review and mentioning that. Yes, if you have the older mags you will have to change out the baseplate for it to seat properly.
Thanks for checking out the review and great feedback. Please check out my other reviews and share the channel with your friends and other enthusiasts.
Dude!! Where have you been all my life? This is the best review I found not to mentioned you're sponsered by NWarmory. They're local to me in Portland. Are you living here too? I just subbed. Keep up good work!!
Thanks so much for checking out the review and the great feedback. I’m here in Oregon trying to support the local businesses and making awesome content! NW Armory has been a fantastic supporter of the channel. Check out X-Hunt too. Their a local target company (xhunttargets.com) that is awesome as well. Thanks for subscribing and please share the channel with your friends and other enthusiasts.
One of my buddies did that and it came out nice. Sig had talked about a P320 Legion carry that will have a carry size TXG module. There is a possibility the module will be available for purchase in a carry size from Sig in the future
Thanks for checking out the review. Theres a bit of silicone in mine to hold them in tight but yes I agree the big solid chunk of tungsten would be better. What is Wilson did a tungsten infused grip like the TXG? 🤔
I think the Wilson Combat grip module would be a great choice for your Vtac. The mag release is ambi. Just like your factory mag release you will have to take it out and re-install it if you want to move it to the right side of the gun. If it was me I would go with the full size in fde and add the tungsten weight kit. Let us know what you end up doing and how you like it.
If in a Battle for your life, and dealing with all elements of weather, why the heck would any one want, or use a Pro cut slide? it seems like access points for Rocks, Dirt, Snow, Ice, and everything else in between, that will ultimately make your Protection fail you.
I can think of two reasons. 1) You’re battling for your life in a perfectly controlled environment. Mine would include a sunny 72° day, after lunch, while having a iced coffee and mag dumping a endless mound of loaded mags. 2) You wanna look as tacticool as possible while battling for your life. 😎👉💨💨
Do I need to get new mags for it? I replaced the frame (CCMB) of my M18 and the original 10rd mags are sticking out for some reason. Any suggestions? Thanks
Did you have to make any modifications to the standard 17rnd magazines? I've been seeing a lot of people that had to modify their 15rnd magazines so that they seat properly. If the 17rnd magazines work without any modifications you've sold me on the grip!
This may have been addressed but I want to make sure I understand the build. You have the 3.9 inch slide on the full size Wilson combat grip module? I made the mistake of buying the carry module instead of the full size one, limiting my capacity to 15 instead of 17. I originally thought the 3.9 would have came up short on the full size module 😅
Completely sold on the grip module. Can you please let me know what size was the pro cut slide and FCU you had with it? Looking for the best possible trigger on the 320
Yes the grip module is awesome. The Pro-cut slide is the compact slide for the 3.9” barrel. The FCU I used is for a X-carry. You can use any P320 FCU. The best looking trigger in my option is the Armory Craft P320 straight adjustable trigger. Sooooo sweet!
Thank you, CCC. I have a Wilson Combat 92G Tactical Centurion, and the grips on it are very sharp and uncomfortable. Would you kindly recommend replacement grips for my gun?
Thanks for checking out the review! I can’t say for certain that it is smaller in circumference but I think it definitely feels smaller and has a more ergonomic shape if you have medium to smaller size hands.
I have medium hands and I like the ergonomics/ feel of the Wilson module the best. I would certainly say it does feel smaller. The thumb indent to me is a big plus. However it’s not as heavy as say the TXG module so I think the felt recoil is more. Overall a fantastic choice for a carry P320
@@ConcealedCarryChannel Thanks for getting back to me. I have size small modules on their way. One is traditional 320 and the other an x-Carry. I'll report back once I have tried them. I have the 9mm and a .40 / 320 coming.
@@sunkist3575 I bought X carry and X Compact grip modules in size small off Sigs website. I had them in less than 10 days. Love the way they fit my hand. And they don’t slip during recoil the way the original grip modules do.
@@sunkist3575 Bought mine a year ago, i have a Carry model in .40, and its by far my best pistol, and by far the most ergonomically comfortable out of all, and i love the trigger pull compared to my others.
It looks like it will work with the p250 since the other grip modules for p320’s are compatible with the p250 as well. What might not work is the older magazine basepads if they say “Sig Sauer” on them versus having the newer SIG logo on the bottom.
Thanks for checking out the channel. With such a specific question I feel that the most appropriate people to ask this question of would be your lawyer and/or contact Wilson combat directly.
I like the feel of the axg a lot. The g10 grips are awesome. But the thin profile and light weight of the Wilson in my option make it a more concealable and carry friendly option.
Thanks for checking out the video and your feedback. Have you checked out the Sig AXG grip module yet? I haven’t seen one in person yet, but when I do I’m certainly going to be reviewing it. Stay tuned!
Having shot the 320 X Carry and then a Glock Gen 5. There is no comparison between the two when it comes to the trigger. The Sig X Carry is far better.
Thanks for checking out the review. You actually can put a longer Glock slide on a smaller Glock frame. For this Lone wolf has their slide adapter: www.lonewolfdist.com/PRODUCT/922564/lwd-slideadapter/ I think this would be a good option if you’re looking to fill in the gap 😎👍
P320 x-carry has NOT been discontinued. They are just now on revision 2 which no longer carries the giant x-carry name on the side of the slide and no longer has the relief cut on top of the slide. Great video, otherwise!
Thanks for checking out the review and great feedback. Unfortunately CZcams doesn’t let me edit the video and repost without deleting all the comments and views. I’ll be doing a updated x-carry review in the future
@@ConcealedCarryChannel looking forward to it! It seems like lots of folks aren't aware of the revision. The ID code on the cases end in -R2(revision 2).
Unfortunately that's to be expected. The front serrations of an aftermarket slide not matching that of the frame used. Unless they make the slide specifically for that model of p320 (or whatever the frame might be). Something Glock people don't need to worry about being that Glocks don't have serrations in the front. So, matching any slide to the Glock frames is just about if you like the metal work done to the slide. Where the lightening cuts are. The shape of them. With the Sig P320...the guns end up looking like "Frankenstein guns" viewed up close). I'd rather keep it simple. I'm not into tricking out my guns. Just buy a P320 X5 Legion if you want the weighted grip and open top slide. Want or feel you need work done to your gun? I'd stick with internal mods...at most Cerekoting the exterior (i like "green camo" and lately FDE...would consider a "FDE Camo" Cerekote). I have guns that are too busy looking from the outside.
There isn't a need for them to match up. If you're gripping the slide you don't want to grip the frame. I believe this is for how some people grip the frame with your support hand thumb on it.
Those serrations are not aesthetic sir! They are there for people who use a thumbs forward grip, so that they have better purchase of the slide when firing. They are there more for function than form. I’d rather be worried about ergonomics control and comfort rather than appearance.
Uh, a lot of Glocks do have front slide serrations. Factory and aftermarket. The slide and frame serrations are extremely useful on many guns. It's starting to look like you don't know that the "busy" parts are actually features and you don't know how to use them.
The old 320 modules sucked, chunky crap. The reason I wouldn’t own a 320! Love the new x series modules and the new Wilson compact module, definitely makes the P320x a new and vastly improved pistol!
If you enjoyed this video, check out what we have going on - concealedcarrychannel.com/
That stippling forward of the takedown lever is for the support hand thumb. I find them nice having larger hands.
Thanks for the feedback! Wish I could experience the stippling with my smedium hands 🥺
@Donn Bigelow thanks for the feedback.
Also a good spot to index the trigger finger for finger off trigger gun handling
When I put it on my p320 x compact, it felt better, but not significantly better.
When I went to go shoot it, the difference was incredible.
I recommend trying out the Sig P320 X-compact. It has a smaller barrel and slide than the Glock 19
Love the Wilson grip module on my 320 Rx , installed a apex flat trigger,with olight light and is now the perfect home defense weapon. Shot freehand at 15 yards and 2 in groups all day long. My only problem was the factory mag would not fit in the magwell had to grind the little wings off the mags to work, the only thing I would like to get is some 21 round mags for it.
Do your OEM Mags have trouble fitting in the wilson grip module? I got some 21rders OEM i'd love to put into the Wilson Compact grip module
@@slippynipz I had the same problems with my magazines from P320 Full Size. Older type Sig Sauer factory magazines (marked as Sig Sauer on the base plate) had thicker sides on the base plate. The newer magazines marked with cirkular logo SIG, don´t have these problems, perfectly fits in Wilson Combat Grip Module.
@@janvodros8238 Yeah my 21rd mags have no issue with the square plate and my 15 with the thinner mag flares on the bottom of the well. The normal 10 rounders do not fit in the grip module
I own the No safety m17 and it’s actually my 1st polymer firearm and I love it absolutely love it
Nice 👍 It’s a great gun for sure.
that was an oddly detailed, specific, and to the point review. Much better than I expected, subscribed
Much appreciated! Thanks for checking out my review.
The serrations do make sense to the older 320 slides. The x slides went more vertical. Great video👍
Absolutely, they match exactly with the original 320 slide serrations
Yes every time he said that I was like well it matches the original slide perfectly sooooooo
The texture on the frame in front of the takedown lever is tactile, so you can feel it when your trigger finger is at ready index.
I love both grips the legion grip and the wilson but I'm really starting to like the Legion grip more because the weight and the Organomics but I still like the wilson but for my hands the legion grip is really good to me
I think one thing worth mentioning about the Wilson Combat grip that you didn't cover is how much narrower it is than the X-Carry grip, and how much it tapers in width from the front of the grip to the rear. The result is that the backstrap is quite a bit narrower than the X-Carry grip's; it might even be half as wide. I guess I can see why Wilson Combat did that -- the backstrap really digs into your palm and that may help with recoil control. Personally, I did not like how the Wilson Combat grip feels in my hands and sold it. I much prefer the uniform width of the X-Carry grip from front to rear. The only thing I might change on it is to add the factory grip weight.
Thanks for checking out the review and your feedback. I love hearing from owners and their experiences. Much appreciated!
Definitely agree with you the stock X-carry grip is much more comfortable
I completely disagree
I have both wilson combat, and p80 grip module for the 320,the wilson combat is hands down the best,my p80 mag release was wore out in about 20 mag changes ,because the p80 mag release is solid polymer, the metal mag wore out the polymer mag release so bad the mag would fall out during recoil,or shaking the pistol ,stay away from the p80 grip,until they change the mag release the metal,
Thank you for sharing with us your personal experience and your feedback on the p80, much appreciated!
When I replaced my P320 XCOMPACT with WC Grip,I have noticed my trigger is kinda loose.Aside from that it’s nice and better than the original grip.You’ve convinced me to replaced the original grip.No regret.Thank You for the Video and honest review as always.Be Safe.
Thank you for or the great feedback. Much appreciated! If it’s loose definitely reach out to Wilson. It might be a flaw in the mold of your grip module and they might replace it for you.
@@ConcealedCarryChannel thank You for the info.
I just bought my P320 today. I am interested in this grip module. Even though I have large hands, I like a little slimmer grip; makes mag changes easier for me.
Thanks for the great feedback. I would recommend them
Great video. Very helpful. Thanks.
You know what they say about guys with small hands lol. I love my Wilson grip and the 2 tone with the FDE slide and black grip is gorgeous. Mine has the delta point pro and a streamlight tlr 1 hl. Perfect home defense gun. Will be getting the apex flat trigger soon.
Oh neat. Was hoping there was a video showing the carry grip on the stainless steel slide. Glad I found it. The stainless steel slide doesn't seem to be very common. Glad I managed to pick one up. Thanks for the video decided to get the gripp :)
Happy to hear you found what you’re looking for. I think you’ll like the Wilson Combat grip. Let us know how you like it after the range.
I was excited to be able to install the Wilson module, it felt good before installing it, but once it was installed and tested at the range, I didn't like it. Main reason is because I have large hands, my accuracy was terrible with it also. Just a personal thing with me I'm sure, I reinstalled the SIG module and I'm hitting the targe again.
Thanks for the great feedback. I always like hearing from owners. I have medium size hands so it’s good to hear your perspective having larger hands. I’d be curious to hear what your thoughts are on the axg model since the panels can be replaced with larger grips.
Can I presume that this grip module will work on the sig p320 xcompact rxp as well. I enjoyed the vid. Very informative. May just try the module based on this review.
Yes it certainly will 😎👍
Still waiting for them to come out with a module for the 365.
That would be awesome! I would love for Wilson combat to do a mini version of their p320.
Concealed Carry Channel please feel free to email them to let them know. Their customer service is pretty good. They answered me right away
You no longer have to wait, Breh
Very informative and helpful video. Thanks!!
Thanks for checking out the review. I’m glad you found the content helpful 👍
You neglected to mention that the wilson grip does not work with older p320 magazine base plates.
Thank you for checking out the review and mentioning that. Yes, if you have the older mags you will have to change out the baseplate for it to seat properly.
@@ConcealedCarryChannelYou can also file off the tall ears,of the old mag's base plates, to work i believe
So which WC module will fit the p320 compact with a ten round magazine?
Thanks, Will you post a WCP365 Grip Module Review?
I will as soon as I can get my hands on one. They’re not easy to come by in my local shops.
Very detailed review! Thanks!
Thanks for checking out the review and great feedback. Please check out my other reviews and share the channel with your friends and other enthusiasts.
Dude!! Where have you been all my life?
This is the best review I found not to mentioned you're sponsered by NWarmory.
They're local to me in Portland.
Are you living here too?
I just subbed. Keep up good work!!
Thanks so much for checking out the review and the great feedback. I’m here in Oregon trying to support the local businesses and making awesome content! NW Armory has been a fantastic supporter of the channel. Check out X-Hunt too. Their a local target company (xhunttargets.com) that is awesome as well. Thanks for subscribing and please share the channel with your friends and other enthusiasts.
@@ConcealedCarryChannel I'll check them out. Which gun range do you usually go?
I usually go to SafeFire in Vancouver/Camas. Good people and nice well kept range.
I will get the TXG, and cut it to carry size. The TXG just feels better.
One of my buddies did that and it came out nice. Sig had talked about a P320 Legion carry that will have a carry size TXG module. There is a possibility the module will be available for purchase in a carry size from Sig in the future
Great Job Grant, you are good at what you do. Your explanations are clear and acurate. The retakes are Hilarious
Thanks so much for checking out the channel and the wonderful feedback. Wait till you watch the bodyguard and pandemic pistols review. 😂🤣😂
Wilson should make the grips to use the Sig grip weight. The Wilson ones rattle and move up on grip and get into your firing system.
Thanks for checking out the review. Theres a bit of silicone in mine to hold them in tight but yes I agree the big solid chunk of tungsten would be better. What is Wilson did a tungsten infused grip like the TXG? 🤔
Looks good
Nice video am considering one for my p320xvtac but want to keep it full size and are the mag release ambi which one should I purchase
I think the Wilson Combat grip module would be a great choice for your Vtac. The mag release is ambi. Just like your factory mag release you will have to take it out and re-install it if you want to move it to the right side of the gun. If it was me I would go with the full size in fde and add the tungsten weight kit. Let us know what you end up doing and how you like it.
Looks great
If in a Battle for your life, and dealing with all elements of weather, why the heck would any one want, or use a Pro cut slide? it seems like access points for Rocks, Dirt, Snow, Ice, and everything else in between, that will ultimately make your Protection fail you.
I can think of two reasons. 1) You’re battling for your life in a perfectly controlled environment. Mine would include a sunny 72° day, after lunch, while having a iced coffee and mag dumping a endless mound of loaded mags. 2) You wanna look as tacticool as possible while battling for your life. 😎👉💨💨
Do I need to get new mags for it? I replaced the frame (CCMB) of my M18 and the original 10rd mags are sticking out for some reason. Any suggestions? Thanks
Did you have to make any modifications to the standard 17rnd magazines? I've been seeing a lot of people that had to modify their 15rnd magazines so that they seat properly. If the 17rnd magazines work without any modifications you've sold me on the grip!
I didn’t do any mods to any of the newer 17rd mags but I have heard some slight modifications needed for older Sig mags
I prefer the Wilson over the xcompact. The grip feel much better to me
Thanks for the feedback. I always like hearing from people who have their own experiences with products I’ve reviewed as well
the wilson is the same the just rework all the features the stipil and small cuts but starts as a sig grip
Doesn't have the cutouts at the bottom of the magazine well. Seems like an oversight.
This may have been addressed but I want to make sure I understand the build. You have the 3.9 inch slide on the full size Wilson combat grip module? I made the mistake of buying the carry module instead of the full size one, limiting my capacity to 15 instead of 17. I originally thought the 3.9 would have came up short on the full size module 😅
You are correct. The capacity on this build is 17rds
Completely sold on the grip module. Can you please let me know what size was the pro cut slide and FCU you had with it? Looking for the best possible trigger on the 320
Yes the grip module is awesome. The Pro-cut slide is the compact slide for the 3.9” barrel. The FCU I used is for a X-carry. You can use any P320 FCU. The best looking trigger in my option is the Armory Craft P320 straight adjustable trigger. Sooooo sweet!
@@ConcealedCarryChannel would you carry with that trigger ?
Thank you, CCC. I have a Wilson Combat 92G Tactical Centurion, and the grips on it are very sharp and uncomfortable. Would you kindly recommend replacement grips for my gun?
I would check out lok, hogue and VZ.
Why can’t my magazine seat into the Wilson combat after I transferred the sig P320?
Some people with older p320 mags have had some issues with them fitting.
Is the Wilson Combat grip smaller circumference than the stock P320 medium size grip that the P320 is shipped with?
Thanks for checking out the review! I can’t say for certain that it is smaller in circumference but I think it definitely feels smaller and has a more ergonomic shape if you have medium to smaller size hands.
Where is that stainless steal slide from??
Thanks for checking out the review. The slide is a factory Sig X-Carry slide.
I have small hands and the X-Carry medium feels too big for a natural grip (spoiled by the CZ75's) Does the Wilson feel smaller overall?
I have medium hands and I like the ergonomics/ feel of the Wilson module the best. I would certainly say it does feel smaller. The thumb indent to me is a big plus. However it’s not as heavy as say the TXG module so I think the felt recoil is more. Overall a fantastic choice for a carry P320
@@ConcealedCarryChannel Thanks for getting back to me. I have size small modules on their way. One is traditional 320 and the other an x-Carry. I'll report back once I have tried them. I have the 9mm and a .40 / 320 coming.
@@sunkist3575 I bought X carry and X Compact grip modules in size small off Sigs website. I had them in less than 10 days.
Love the way they fit my hand. And they don’t slip during recoil the way the original grip modules do.
@@stevewilson4514 I took your advice and I got the small grip module. Now it feels right.
@@sunkist3575 Bought mine a year ago, i have a Carry model in .40, and its by far my best pistol, and by far the most ergonomically comfortable out of all, and i love the trigger pull compared to my others.
Just get it. You're welcome.
Curious if my holsters will work with the Wilson grip module. I have a P320 Compact.
Should work fine 👍 I tried the the Wilson carry va the p320 carry and they shared the same holster.
I own the p250 , will this grip module fit ?? Or should I say will it work ?? I would love to buy this grip module , I like it !!
Thanks for checking out the review. I’ll have to ask around and see what I can find out.
It looks like it will work with the p250 since the other grip modules for p320’s are compatible with the p250 as well. What might not work is the older magazine basepads if they say “Sig Sauer” on them versus having the newer SIG logo on the bottom.
Thanks I was thinking bout upgrading my p250 , now I can thanks !!
The X grips come in s, m, and l.
Is this duty use rated? If it's used in a defense situation would it count against you in court?
Thanks for checking out the channel. With such a specific question I feel that the most appropriate people to ask this question of would be your lawyer and/or contact Wilson combat directly.
Do you like the Wilson Combat or Sig AXG grip module better?
I like the feel of the axg a lot. The g10 grips are awesome. But the thin profile and light weight of the Wilson in my option make it a more concealable and carry friendly option.
Does anyone know if I can put an M18 slide and FCG in the Wilson combat grip module?
Yes you can
Is the Wilson combat grip module ambi mag release wise for the p320 m-18?
Yes, it’s the same mag release that Sig uses which you can switch from left to right.
I didn't like the Wilson after some range time with it. Backstrap texture was too aggressive for my hands. Your mileage may very.
Thanks for the great feedback. Did you end up finding a grip module you liked better? Curious to hear what you found
Anyone make magwell flares that fit these wc modules?
Not that I have seen.
Is there a link where you can find/purchase the Wilson combat grip module
shopwilsoncombat.com/Modules/products/1269/
Thanks for the info I ordered from wilsoncombat.com yesterday 🙂
Will the WC grip module work with my current p320 compact holster?
It has worked in the p320 holsters I’ve been able to get a hold of with no issues.
@@ConcealedCarryChannel Great. I have a vedder currently that I love. Thanks for the reply.
I’d run this if I had polymer. But I’d buy a Glock if I wanted polymer. I like aluminum sigs.
Thanks for checking out the video and your feedback. Have you checked out the Sig AXG grip module yet? I haven’t seen one in person yet, but when I do I’m certainly going to be reviewing it. Stay tuned!
Having shot the 320 X Carry and then a Glock Gen 5. There is no comparison between the two when it comes to the trigger. The Sig X Carry is far better.
@@stevewilson4514 OH YES! with out question! let them keep buying the old Bricks, and we will get the SIG P320's
Does that frame fit the M18 slide?
Yes 👍
Concealed Carry Channel thanks gunna order it up now
Make sure to order the appropriate grip module with the thumb safety cut out
You can't put a G17 or G34 slide onto a G19 frame, so how do you know you'd have a "huge gap"?
Thanks for checking out the review. You actually can put a longer Glock slide on a smaller Glock frame. For this Lone wolf has their slide adapter:
www.lonewolfdist.com/PRODUCT/922564/lwd-slideadapter/
I think this would be a good option if you’re looking to fill in the gap 😎👍
@@ConcealedCarryChannel the 17/34 have different locking blocks than the 19. The slides /barrels will not exchange.
P320 x-carry has NOT been discontinued. They are just now on revision 2 which no longer carries the giant x-carry name on the side of the slide and no longer has the relief cut on top of the slide.
Great video, otherwise!
Thanks for checking out the review and great feedback. Unfortunately CZcams doesn’t let me edit the video and repost without deleting all the comments and views. I’ll be doing a updated x-carry review in the future
@@ConcealedCarryChannel looking forward to it! It seems like lots of folks aren't aware of the revision. The ID code on the cases end in -R2(revision 2).
Do you know why did SIG discontinue the Carry P320 X?
Not really sure. It’s a sweet gun and I really like the stainless slide.
Unfortunately that's to be expected. The front serrations of an aftermarket slide not matching that of the frame used. Unless they make the slide specifically for that model of p320 (or whatever the frame might be). Something Glock people don't need to worry about being that Glocks don't have serrations in the front. So, matching any slide to the Glock frames is just about if you like the metal work done to the slide. Where the lightening cuts are. The shape of them.
With the Sig P320...the guns end up looking like "Frankenstein guns" viewed up close). I'd rather keep it simple. I'm not into tricking out my guns. Just buy a P320 X5 Legion if you want the weighted grip and open top slide. Want or feel you need work done to your gun? I'd stick with internal mods...at most Cerekoting the exterior (i like "green camo" and lately FDE...would consider a "FDE Camo" Cerekote).
I have guns that are too busy looking from the outside.
Thanks for checking out the review and feedback. Much appreciated. Please share the channel with your friends and other enthusiasts.
There isn't a need for them to match up. If you're gripping the slide you don't want to grip the frame. I believe this is for how some people grip the frame with your support hand thumb on it.
Those serrations are not aesthetic sir! They are there for people who use a thumbs forward grip, so that they have better purchase of the slide when firing. They are there more for function than form. I’d rather be worried about ergonomics control and comfort rather than appearance.
Uh, a lot of Glocks do have front slide serrations. Factory and aftermarket. The slide and frame serrations are extremely useful on many guns. It's starting to look like you don't know that the "busy" parts are actually features and you don't know how to use them.
On your review you often refer to "this one' and you don't say which one this one is
Hard to follow this review.
The old 320 modules sucked, chunky crap. The reason I wouldn’t own a 320! Love the new x series modules and the new Wilson compact module, definitely makes the P320x a new and vastly improved pistol!
Agreed!
Those serrations make total sense if you know how to shoot and don't have little girl hands.
😳😂😂
Sig oem plastic feels cheap and shows wear immediately.
It’s good to see Kyle Rittenhouse doing reviews!
@ 12:00......KREEPY!!!
😬
For me, The Wilson combat module is too similar to the stock module. I think the X module is superior, by far.
Thanks for checking out the review and your feedback. Much appreciated.
This thing is great but ugly as hell