How to Remove Citroen C3 A5 Dash Parts; A/C Controls, trim/vents, Radio,and display

Welcome,
How to Remove Citroen C3 A5 Dash Parts; A/C Controls, trim/vents, Radio, and display
Here I will show you how to remove various dash parts from a Citroen C3 A5, we will be removing the dash trim with the vents, screen display, radio, heater AC Control panel, and surround
If you need to remove the radio you don't need to remove any other parts.
If you need to remove the heater AC panel you only need to remove the lower surround.
If you need to remove the screen display all you need to remove is the top dash trim, you don't need to remove the bottom parts
Citroen C3 A5 , 2010-2014 (Applicable models)
I hope you've found this video helpful, don't forget to show your support by subscribing
Enjoy, and best of luck
Carstar
Contact on [e-mail]
Disclaimer
Australia is left-hand drive with the steering wheel on the right, this can sometimes make my videos null or void for Right-hand drive countries with the steering on the left - please keep this in mind.
Before following any car tutorial, please ensure you have the knowledge, skills, and tools to perform the task safely and correctly. Always follow the manufacturer's instructions and guidelines, and if you are unsure about any aspect of the tutorial, seek the advice of a qualified mechanic or automotive technician. Any actions taken based on the information provided in the tutorial are at your own risk, and neither the author nor any affiliated parties can be held responsible for any damage or injury that may occur.

[@Durante0016]

Thanks you probably saved me from wrecking something

[@Aussiecarstar]

You are welcome :)

[@talhaqureshi8364]

Thanks for the video! Super informative. Can you please tell me how to remove the central tunnel also? A video would be great!

[@Aussiecarstar]

Hello you are welcome ☺️, when you say the central tunnel I’m not sure, please elaborate on that ?

[@talhaqureshi8364]

Thank you for the reply, by central tunnel I mean the trim between the two front seats, housing the handbrake and the aux/12v output. Actually I wanted to exchange the aux port with an aux + usb port and keep the 12v as it is. And for this I need to run the usb cable from the radio to the Aux port.
So I wanted to know how I can remove that trim and run the cables cleanly.
Best regards

[@Aussiecarstar]

@@talhaqureshi8364 Oh I understand , I will see if i can make a video for you :)

[@talhaqureshi8364]

Thanks!

[@Mozesd]

I will try this tomorrow :)

[@Aussiecarstar]

Best of luck ☺️

[@Mozesd]

@@Aussiecarstar Thanks for the video !! worked perfect

[@Aussiecarstar]

You are welcome :)@@Mozesd