@@SGO_ I’m close then, I have BTR stage 4, headers, and x pipe. Still has cats and mufflers though. So I need to do 3inch straight pipe from the headers.
I did the ls3 conversion & btr stage 3 cam fbo tune 436 wrp 420 torque I know mine automatic but sounds pretty similar like yours! I love the build man! Nice car
With an SCT X4 I would use DynoSteve if not cammed. He won't remote tune higher than .600 lift, but his bolt on tunes are great. If already cammed I would suggest maybe getting an HP Tuners setup and tuning with GPI if you are dead set on remote tuning.
Dang, that must be something new. He did mine twice with no cats. But the EPA is coming down hard on a lot of the bigger tuners out there with fines, so I can't say I blame him. You may be better off finding someone local to you.@@sephalocco
Because you can tell when he pull off he have to rev up his rpms pretty high to pull off. If he had lower gears it will Eliminate that almost and it will put him in the powerband faster too
Lmao so what’s lower than 1st gear? 😂😂 people on CZcams know nothing 😂 I know what I’m doing …. Regina rpm’s just because I wanna hear the exhaust lmao
Whenever I want a mustang, I'll just watch this.
Had one not worth it
There is nothing better than the Sound of a cammed SS
💯
You never heard a cammed z06
@@Jinxx03 lol sure I have, at camaro fest... Plenty of them 😉
@@Jinxx03 Hell, the LT1, LS7 LS3 all sound exactly a like with cam and headers.
Let’s all agree they all sound beautiful
Confirmed, It's LOUD LOUD! Dude and the scenery is spectacular too!
Appreciate it bro 🙏🏾
Ohhh yea
One beautiful SS man, I love those wheels, sounds great too. That is a cool place to take some pics too.
Appreciate it !
The sound of America
That exhaust is music to my ears. Bad ass camaro💯💯💯
Looks and sounds amazing!
Appreciate it !
Soooo nice. Just love that sound, I'll use it on my cel wake up alarm.
Like how these cars remind you of corvettes from the rear lol❤
Looks like springfield tn. I like your content. I'm just down the road
I have a very similar build. everyone loves a cammed 5th gen
are those the newer American racing wheels??
Agree with you! And yes American racing wheels
I got the same setup. Drone isant terrible and is pretty tolerable noise wise inside. Outside, different story lol nice ride chevy brother 👍
Thanks and yeah not too worries about it !
Damn!! That sounds amazing!!!
Appreciate it bro
The clutch has left the chat.
Oh yeah it was stock clutch
Good shit man.
Appreciate it
Wowwwwww sounds amazing
Appreciate it !
I need to know exactly what you’ve done to achieve this beautiful sound. Mine sounds amazing but not quite that good
big cam first! mine was btr stage 4, long tubes, intake, no cats, full 3 inch w/ x pipe into straight pipes in the back
@@SGO_ I’m close then, I have BTR stage 4, headers, and x pipe. Still has cats and mufflers though. So I need to do 3inch straight pipe from the headers.
@@SGO_ Would I need a re-tune after the cat delete?
That is what I had yes
What are your wheel n tire specs plus suspension?
You obviously here them headers
Need to know the wheel and tire setup
What's the year and the trim? Would it kill you to add some information?
2010-13 and most likely a 2SS
2012 2ss
What kind of wheels are those?
Seeeeesh
What kind of cam and did you do springs also?
in envy
Any problems passing inspection
I want one 😢
My god santos
What headers are you using?
Texas spend 1 7/8
Whats your set up bro!?
anyone know the wheels?
How much in labor did it cost to cam? I have a stage 3 cam im tryna get put in
Min was already there but I know shops charge around 2k-3k depending on shop. Gotta take motor apart then tune
I did the ls3 conversion & btr stage 3 cam fbo tune 436 wrp 420 torque
I know mine automatic but sounds pretty similar like yours! I love the build man! Nice car
Hey I know you got rid of this beauty but was just wondering if you know anyone that sells email tunes ? I have a sct x4 tuner as well
Google is the best bet
With an SCT X4 I would use DynoSteve if not cammed. He won't remote tune higher than .600 lift, but his bolt on tunes are great. If already cammed I would suggest maybe getting an HP Tuners setup and tuning with GPI if you are dead set on remote tuning.
@@InFiD3ViL1 I checked his website and I have no cats and he won’t do it without any 😭
Dang, that must be something new. He did mine twice with no cats. But the EPA is coming down hard on a lot of the bigger tuners out there with fines, so I can't say I blame him. You may be better off finding someone local to you.@@sephalocco
🤘😈🤘
🙏🏾
👍
What’s the setup ?
Headers, x pipe and full 3 inch pipe to straight pipes 4inch tips.
I'm deaf now 😆
Hahaha I warned people
how’s the cabin noise?
very drony fo sure
Yeah but I don’t daily the car it’s just for fun so the drone does not getting annoying at all.
Wow………
Car need lower gears
Because you can tell when he pull off he have to rev up his rpms pretty high to pull off. If he had lower gears it will Eliminate that almost and it will put him in the powerband faster too
Lmao so what’s lower than 1st gear? 😂😂 people on CZcams know nothing 😂 I know what I’m doing …. Regina rpm’s just because I wanna hear the exhaust lmao
I have stock and but to upgrade ton3.91 but that dude doesn’t know what is going on lol I know how to drive my car 😂
@@Bonedadon I’m assuming so the 1le came with it it increases the torque so I’m guessing so
@@Bonedadon for a manual I would recommend 4.10s and I had 5th gen before.